[U-Boot] [PATCH 2/6] sunxi: video: Add hdmi support
Hans de Goede
hdegoede at redhat.com
Sat Dec 20 15:42:01 CET 2014
So far we've been programming the hdmi-encoder to send out dvi data over the
hdmi connector. This works well for most devices, including hdmi devices, but
not all devices accept dvi data on a hdmi input.
Add support for sending proper hdmi data over the hdmi output found on most
sunxi boards. This can be turned on by adding by adding monitor=hdmi as option
to the video-mode env. variable.
A follow up patch will determine wether to send dvi or hdmi automatically when
EDID is used.
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
arch/arm/include/asm/arch-sunxi/display.h | 33 +++++++++++-----
drivers/video/sunxi_display.c | 66 ++++++++++++++++++++++++++++---
2 files changed, 84 insertions(+), 15 deletions(-)
diff --git a/arch/arm/include/asm/arch-sunxi/display.h b/arch/arm/include/asm/arch-sunxi/display.h
index 8c4835e..838b217 100644
--- a/arch/arm/include/asm/arch-sunxi/display.h
+++ b/arch/arm/include/asm/arch-sunxi/display.h
@@ -102,23 +102,30 @@ struct sunxi_hdmi_reg {
u32 video_fp; /* 0x01c */
u32 video_spw; /* 0x020 */
u32 video_polarity; /* 0x024 */
- u8 res0[0x1d8]; /* 0x028 */
+ u8 res0[0x58]; /* 0x028 */
+ u8 avi_info_frame[0x14]; /* 0x080 */
+ u8 res1[0x4c]; /* 0x094 */
+ u32 qcp_packet0; /* 0x0e0 */
+ u32 qcp_packet1; /* 0x0e4 */
+ u8 res2[0x118]; /* 0x0e8 */
u32 pad_ctrl0; /* 0x200 */
u32 pad_ctrl1; /* 0x204 */
u32 pll_ctrl; /* 0x208 */
u32 pll_dbg0; /* 0x20c */
u32 pll_dbg1; /* 0x210 */
u32 hpd_cec; /* 0x214 */
- u8 res1[0x28]; /* 0x218 */
- u32 spd_pkt; /* 0x240 */
- u8 res2[0xac]; /* 0x244 */
+ u8 res3[0x28]; /* 0x218 */
+ u8 vendor_info_frame[0x14]; /* 0x240 */
+ u8 res4[0x9c]; /* 0x254 */
u32 pkt_ctrl0; /* 0x2f0 */
u32 pkt_ctrl1; /* 0x2f4 */
- u8 res3[0x18]; /* 0x2f8 */
+ u8 res5[0x8]; /* 0x2f8 */
+ u32 unknown; /* 0x300 */
+ u8 res6[0xc]; /* 0x304 */
u32 audio_sample_count; /* 0x310 */
- u8 res4[0xec]; /* 0x314 */
+ u8 res7[0xec]; /* 0x314 */
u32 audio_tx_fifo; /* 0x400 */
- u8 res5[0xfc]; /* 0x404 */
+ u8 res8[0xfc]; /* 0x404 */
#ifndef CONFIG_MACH_SUN6I
u32 ddc_ctrl; /* 0x500 */
u32 ddc_addr; /* 0x504 */
@@ -131,7 +138,7 @@ struct sunxi_hdmi_reg {
u32 ddc_cmnd; /* 0x520 */
u32 ddc_exreg; /* 0x524 */
u32 ddc_clock; /* 0x528 */
- u8 res6[0x14]; /* 0x52c */
+ u8 res9[0x14]; /* 0x52c */
u32 ddc_line_ctrl; /* 0x540 */
#else
u32 ddc_ctrl; /* 0x500 */
@@ -144,9 +151,9 @@ struct sunxi_hdmi_reg {
u32 ddc_fifo_status; /* 0x51c */
u32 ddc_clock; /* 0x520 */
u32 ddc_timeout; /* 0x524 */
- u8 res6[0x18]; /* 0x528 */
+ u8 res9[0x18]; /* 0x528 */
u32 ddc_dbg; /* 0x540 */
- u8 res7[0x3c]; /* 0x544 */
+ u8 res10[0x3c]; /* 0x544 */
u32 ddc_fifo_data; /* 0x580 */
#endif
};
@@ -191,9 +198,12 @@ struct sunxi_hdmi_reg {
#define SUNXI_HDMI_IRQ_STATUS_BITS 0x73
#define SUNXI_HDMI_HPD_DETECT (1 << 0)
#define SUNXI_HDMI_VIDEO_CTRL_ENABLE (1 << 31)
+#define SUNXI_HDMI_VIDEO_CTRL_HDMI (1 << 30)
#define SUNXI_HDMI_VIDEO_POL_HOR (1 << 0)
#define SUNXI_HDMI_VIDEO_POL_VER (1 << 1)
#define SUNXI_HDMI_VIDEO_POL_TX_CLK (0x3e0 << 16)
+#define SUNXI_HDMI_QCP_PACKET0 3
+#define SUNXI_HDMI_QCP_PACKET1 0
#ifdef CONFIG_MACH_SUN6I
#define SUNXI_HDMI_PAD_CTRL0_HDP 0x7e80000f
@@ -224,6 +234,9 @@ struct sunxi_hdmi_reg {
#define SUNXI_HDMI_PLL_DBG0_PLL3 (0 << 21)
#define SUNXI_HDMI_PLL_DBG0_PLL7 (1 << 21)
+#define SUNXI_HDMI_PKT_CTRL0 0x00000f21
+#define SUNXI_HDMI_PKT_CTRL1 0x0000000f
+
#ifdef CONFIG_MACH_SUN6I
#define SUNXI_HMDI_DDC_CTRL_ENABLE (1 << 0)
#define SUNXI_HMDI_DDC_CTRL_SCL_ENABLE (1 << 4)
diff --git a/drivers/video/sunxi_display.c b/drivers/video/sunxi_display.c
index 0997740..394153a 100644
--- a/drivers/video/sunxi_display.c
+++ b/drivers/video/sunxi_display.c
@@ -403,8 +403,55 @@ static void sunxi_drc_init(void)
}
#endif
+static void sunxi_hdmi_setup_info_frames(const struct ctfb_res_modes *mode)
+{
+ struct sunxi_hdmi_reg * const hdmi =
+ (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE;
+ u8 checksum = 0;
+ u8 avi_info_frame[17] = {
+ 0x82, 0x02, 0x0d, 0x00, 0x12, 0x00, 0x88, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00
+ };
+ u8 vendor_info_frame[19] = {
+ 0x81, 0x01, 0x06, 0x29, 0x03, 0x0c, 0x00, 0x40,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00
+ };
+ int i;
+
+ if (mode->pixclock_khz <= 27000)
+ avi_info_frame[5] = 0x40; /* SD-modes, ITU601 colorspace */
+ else
+ avi_info_frame[5] = 0x80; /* HD-modes, ITU709 colorspace */
+
+ if (mode->xres * 100 / mode->yres < 156)
+ avi_info_frame[5] |= 0x18; /* 4 : 3 */
+ else
+ avi_info_frame[5] |= 0x28; /* 16 : 9 */
+
+ for (i = 0; i < ARRAY_SIZE(avi_info_frame); i++)
+ checksum += avi_info_frame[i];
+
+ avi_info_frame[3] = 0x100 - checksum;
+
+ for (i = 0; i < ARRAY_SIZE(avi_info_frame); i++)
+ writeb(avi_info_frame[i], &hdmi->avi_info_frame[i]);
+
+ writel(SUNXI_HDMI_QCP_PACKET0, &hdmi->qcp_packet0);
+ writel(SUNXI_HDMI_QCP_PACKET1, &hdmi->qcp_packet1);
+
+ for (i = 0; i < ARRAY_SIZE(vendor_info_frame); i++)
+ writeb(vendor_info_frame[i], &hdmi->vendor_info_frame[i]);
+
+ writel(SUNXI_HDMI_PKT_CTRL0, &hdmi->pkt_ctrl0);
+ writel(SUNXI_HDMI_PKT_CTRL1, &hdmi->pkt_ctrl1);
+
+ setbits_le32(&hdmi->video_ctrl, SUNXI_HDMI_VIDEO_CTRL_HDMI);
+}
+
static void sunxi_hdmi_mode_set(const struct ctfb_res_modes *mode,
- int clk_div, int clk_double)
+ bool hdmi_mode, int clk_div, int clk_double)
{
struct sunxi_hdmi_reg * const hdmi =
(struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE;
@@ -413,6 +460,9 @@ static void sunxi_hdmi_mode_set(const struct ctfb_res_modes *mode,
/* Write clear interrupt status bits */
writel(SUNXI_HDMI_IRQ_STATUS_BITS, &hdmi->irq);
+ if (hdmi_mode)
+ sunxi_hdmi_setup_info_frames(mode);
+
/* Init various registers, select pll3 as clock source */
writel(SUNXI_HDMI_VIDEO_POL_TX_CLK, &hdmi->video_polarity);
writel(SUNXI_HDMI_PAD_CTRL0_RUN, &hdmi->pad_ctrl0);
@@ -458,7 +508,8 @@ static void sunxi_engines_init(void)
#endif
}
-static void sunxi_mode_set(const struct ctfb_res_modes *mode, unsigned int address)
+static void sunxi_mode_set(const struct ctfb_res_modes *mode, char *monitor,
+ unsigned int address)
{
struct sunxi_de_be_reg * const de_be =
(struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE;
@@ -468,6 +519,7 @@ static void sunxi_mode_set(const struct ctfb_res_modes *mode, unsigned int addre
(struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE;
int clk_div, clk_double;
int retries = 3;
+ bool hdmi_mode = strcmp(monitor, "hdmi") == 0;
retry:
clrbits_le32(&hdmi->video_ctrl, SUNXI_HDMI_VIDEO_CTRL_ENABLE);
@@ -476,7 +528,7 @@ retry:
sunxi_composer_mode_set(mode, address);
sunxi_lcdc_mode_set(mode, &clk_div, &clk_double);
- sunxi_hdmi_mode_set(mode, clk_div, clk_double);
+ sunxi_hdmi_mode_set(mode, hdmi_mode, clk_div, clk_double);
setbits_le32(&de_be->reg_ctrl, SUNXI_DE_BE_REG_CTRL_LOAD_REGS);
setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_START);
@@ -511,6 +563,7 @@ void *video_hw_init(void)
const char *options;
unsigned int depth;
int ret, hpd, edid;
+ char monitor[16];
memset(&sunxi_display, 0, sizeof(struct sunxi_display));
@@ -521,6 +574,8 @@ void *video_hw_init(void)
video_get_ctfb_res_modes(RES_MODE_1024x768, 24, &mode, &depth, &options);
hpd = video_get_option_int(options, "hpd", 1);
edid = video_get_option_int(options, "edid", 1);
+ video_get_option_string(options, "monitor", monitor, sizeof(monitor),
+ "dvi");
/* Always call hdp_detect, as it also enables various clocks, etc. */
ret = sunxi_hdmi_hpd_detect();
@@ -541,12 +596,13 @@ void *video_hw_init(void)
printf("Only non-interlaced modes supported, falling back to 1024x768\n");
mode = &res_mode_init[RES_MODE_1024x768];
} else {
- printf("Setting up a %dx%d console\n", mode->xres, mode->yres);
+ printf("Setting up a %dx%d %s console\n",
+ mode->xres, mode->yres, monitor);
}
sunxi_display.enabled = true;
sunxi_engines_init();
- sunxi_mode_set(mode, gd->fb_base - CONFIG_SYS_SDRAM_BASE);
+ sunxi_mode_set(mode, monitor, gd->fb_base - CONFIG_SYS_SDRAM_BASE);
/*
* These are the only members of this structure that are used. All the
--
2.1.0
More information about the U-Boot
mailing list