[U-Boot] [RESEND][PATCH v11 0/3] Adds support for Exynos5422 odroid xu3 board
Minkyu Kang
mk7.kang at samsung.com
Mon Dec 22 13:21:52 CET 2014
On 12/12/14 14:45, Hyungwon Hwang wrote:
> This is v11 of the patchset adding support Odroud XU3 board.
>
> link to the previous version:
> v2: https://www.mail-archive.com/u-boot@lists.denx.de/msg152275.html
> v3: https://www.mail-archive.com/u-boot%40lists.denx.de/msg152677.html
> v4: https://patchwork.ozlabs.org/patch/407411/
> v5: https://patchwork.ozlabs.org/patch/407941/
> v6: https://patchwork.ozlabs.org/patch/408647/
> v7: https://patchwork.ozlabs.org/patch/410204/
> v8: https://patchwork.ozlabs.org/patch/410709/
> v9: https://patchwork.ozlabs.org/patch/415514/
> v10: https://patchwork.ozlabs.org/patch/416720/
>
> The patchset by Akshay Saraswat is already merged into u-boot-samsung.
> Please ignore the instruction about the additional patchset in v8.
>
> How to test this patch:
> 1. git clone http://git.denx.de/u-boot-samsung.git
> 2. Apply this patchset
> 3. make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- odroid-xu3_config
> 4. make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- -j8
> 5. Now you can use u-boot-dtb.bin for your downloading
>
> WARNING: (update in V10)
> It was impossible to make the u-boot image smaller than 335872 bytes, and also
> I did not want to waste my time to make it fit for that restriction, because
> the discussion about this issue is in progress in malining list. I used BL2 by
> Suriyan Ramasami <suriyan.r at gmail.com> which the restriction is removed for
> testing. If you need the BL2 for testing, please contact me or Suriyan.
>
> Note: If you use micro SD card for your test you have to apply the below
> patch additionally. This patch is needed, because micro sd card is
> recognized as MMC1 instead of MMC0. Additional work is needed to make it
> work regardless of device id.
>
> Thanks for Sjoerd Simons. Not only did he comment my patchset, but he also made
> real patch for me. I squashed some part of that patchset, and included the
> remainings into my patchset.
>
> diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h
> index ba591e7..437eaae 100644
> --- a/include/configs/exynos5-common.h
> +++ b/include/configs/exynos5-common.h
> @@ -109,7 +109,7 @@
>
> #define CONFIG_SYS_MONITOR_BASE 0x00000000
>
> -#define CONFIG_SYS_MMC_ENV_DEV 0
> +#define CONFIG_SYS_MMC_ENV_DEV 1
>
> #define CONFIG_SECURE_BL1_ONLY
>
> Changes for v2:
> - Add a patch to add new common setup header file for Odroid X2/U3
> and Odroid XU3
>
> Changes for v3:
> - Remove the patch which adds new common setup header file from v2
> - Remove the wrong patch to fix GPIO information of Exynos 5800
> - Remove unnecessary node from DT file
> - Remove unnecessary features from config file
> - Fix some trivial typos in comments
>
> Changes for v4:
> - Add MMC FIFO buffer's configuration to DT file
> - Make CONFIG_OF_CONTROL be set by the target information
> - Add basic document to doc/README.odroid-xu3
> - Add CONFIG_CMD_EXT4 to config file
> - Add environment size and offset to config file
> - Add extra default environment to make bootable without modification
> - Remove unnecessary features from config file
>
> Changes for v5:
> - Add the specific build instruction
> - Update the information of patchset by Akshay Saraswat
> - Convert /include/ to #include in DT file
>
> Changes for v6:
> - Separate out the documentation to new commit
> - Remove unnecessary header file inclusuib from the board-specific setup file
> - Make the function board_clock_init be declared, only when
> CONFIG_BOARD_EARLY_INIT_F is defined
>
> Changes for v7:
> - Fix several errata in the documentation
> - Remove OF_CONTROL dependency from !SPL_BUILD
>
> Changes for v8:
> - Remove unnecessary properties in DT mmc node
>
> Changes for v9:
> - Remove the first patch which change GPIO entries order. It became useless,
> after DT support is added
> - Remove useless variables in the default environment
> - Add the new contents to the documentation of Odroid X2/U2, instead of
> making new document for Odorid XU3
> - Remove the detailed information in the header file, and leave the
> reference to the documentation
>
> Changes for v10:
> - Move the non common configs in Exynos5420 config file to each board file
> - Remove the config unsets which are added to make the result image small
> This is needless now, because the image is not small enough even though these
> unsets are added.
> - Remove redundant DT node and properties
> - Remove the odroid-xu3 board file and make odroid-xu3 a variant of smdk5420
> - Fix some errata in documentation
> - Include the patch by Sjoerd Simons as 4th patch
>
> Changes for v11:
> - Move the include point of exynos5420-common.h after
> CONFIG_ENV_IS_IN_SPI_FLASH in smdk5420.h
> - Remove duplicated CONFIG_CMD_EXT2/EXT4/FAT from odroid_xu3.h
> - Fix the typo in the comment, which is found in odroid_xu3.h
> - Add a comment to specify not available networking yet
> - Remove the patch abou EHCI
>
> Hyungwon Hwang (3):
> config: exynos5420: move non common configs to specific board files
> Odroid-XU3: Add support for Odroid-XU3
> Odroid-XU3: Add documentation for Odroid-XU3
>
> arch/arm/cpu/armv7/exynos/Kconfig | 4 +++
> arch/arm/dts/Makefile | 3 ++-
> arch/arm/dts/exynos5422-odroidxu3.dts | 45 +++++++++++++++++++++++++++++++
> board/samsung/smdk5420/Kconfig | 13 +++++++++
> configs/odroid-xu3_defconfig | 4 +++
> doc/README.odroid | 47 +++++++++++++++++++++-----------
> include/configs/exynos5420-common.h | 18 -------------
> include/configs/odroid_xu3.h | 51 +++++++++++++++++++++++++++++++++++
> include/configs/peach-pi.h | 6 +++++
> include/configs/peach-pit.h | 6 +++++
> include/configs/smdk5420.h | 11 ++++++++
> 11 files changed, 173 insertions(+), 35 deletions(-)
> create mode 100644 arch/arm/dts/exynos5422-odroidxu3.dts
> create mode 100644 configs/odroid-xu3_defconfig
> create mode 100644 include/configs/odroid_xu3.h
>
applied to u-boot-samsung.
Thanks,
Minkyu Kang.
More information about the U-Boot
mailing list