[U-Boot] [PATCH v4 05/18] mmc: incomplete test to switch to high-capacity group size definitions

Diego Santa Cruz Diego.SantaCruz at spinetix.com
Tue Dec 23 10:50:20 CET 2014


The eMMC spec mandates that the high-capacity group size definitions
should be enabled when the device is partitioned (by setting
ERASE_GROUP_DEF in EXT_CSD). The current test to determine when this is
required misses a few cases. In particular a device may have been
partitioned without setting the enhanced attribute on any partition
or partitioning may be completed without creating any extra partitions.

This change moves the code to set ERASE_GROUP_DEF to after reading
all partition information. It is also enabled when
PARTITIONING_SETTING_COMPLETED is set as it is necessary to enable
ERASE_GROUP_DEF before setting that bit, so it means that the user
previously switched to the high capacity definitions.

Signed-off-by: Diego Santa Cruz <Diego.SantaCruz at spinetix.com>
---
 drivers/mmc/mmc.c | 52 ++++++++++++++++++++++++++++++----------------------
 1 file changed, 30 insertions(+), 22 deletions(-)

diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 9ce15d0..5e9926c 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -818,6 +818,7 @@ static int mmc_startup(struct mmc *mmc)
 	ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, MMC_MAX_BLOCK_LEN);
 	ALLOC_CACHE_ALIGN_BUFFER(u8, test_csd, MMC_MAX_BLOCK_LEN);
 	int timeout = 1000;
+	bool has_parts = false;
 
 #ifdef CONFIG_MMC_SPI_CRC_ON
 	if (mmc_host_is_spi(mmc)) { /* enable CRC check for spi */
@@ -1006,13 +1007,41 @@ static int mmc_startup(struct mmc *mmc)
 			break;
 		}
 
+		/* store the partition info of emmc */
+		mmc->part_support = ext_csd[EXT_CSD_PARTITIONING_SUPPORT];
+		if ((ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & PART_SUPPORT) ||
+		    ext_csd[EXT_CSD_BOOT_MULT])
+			mmc->part_config = ext_csd[EXT_CSD_PART_CONF];
+		if (ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & ENHNCD_SUPPORT)
+			mmc->part_attr = ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE];
+
+		mmc->capacity_boot = ext_csd[EXT_CSD_BOOT_MULT] << 17;
+
+		mmc->capacity_rpmb = ext_csd[EXT_CSD_RPMB_MULT] << 17;
+
+		for (i = 0; i < 4; i++) {
+			int idx = EXT_CSD_GP_SIZE_MULT + i * 3;
+			mmc->capacity_gp[i] = (ext_csd[idx + 2] << 16) +
+				(ext_csd[idx + 1] << 8) + ext_csd[idx];
+			mmc->capacity_gp[i] *=
+				ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
+			mmc->capacity_gp[i] *= ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
+			if (mmc->capacity_gp[i])
+				has_parts = true;
+		}
+
 		/*
 		 * Host needs to enable ERASE_GRP_DEF bit if device is
 		 * partitioned. This bit will be lost every time after a reset
 		 * or power off. This will affect erase size.
 		 */
+		if (ext_csd[EXT_CSD_PARTITION_SETTING] &
+		    EXT_CSD_PARTITION_SETTING_COMPLETED)
+			has_parts = true;
 		if ((ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & PART_SUPPORT) &&
-		    (ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE] & PART_ENH_ATTRIB)) {
+		    (ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE] & PART_ENH_ATTRIB))
+			has_parts = true;
+		if (has_parts) {
 			err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
 				EXT_CSD_ERASE_GROUP_DEF, 1);
 
@@ -1048,27 +1077,6 @@ static int mmc_startup(struct mmc *mmc)
 			mmc->erase_grp_size = (erase_gsz + 1)
 				* (erase_gmul + 1);
 		}
-
-		/* store the partition info of emmc */
-		mmc->part_support = ext_csd[EXT_CSD_PARTITIONING_SUPPORT];
-		if ((ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & PART_SUPPORT) ||
-		    ext_csd[EXT_CSD_BOOT_MULT])
-			mmc->part_config = ext_csd[EXT_CSD_PART_CONF];
-		if (ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & ENHNCD_SUPPORT)
-			mmc->part_attr = ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE];
-
-		mmc->capacity_boot = ext_csd[EXT_CSD_BOOT_MULT] << 17;
-
-		mmc->capacity_rpmb = ext_csd[EXT_CSD_RPMB_MULT] << 17;
-
-		for (i = 0; i < 4; i++) {
-			int idx = EXT_CSD_GP_SIZE_MULT + i * 3;
-			mmc->capacity_gp[i] = (ext_csd[idx + 2] << 16) +
-				(ext_csd[idx + 1] << 8) + ext_csd[idx];
-			mmc->capacity_gp[i] *=
-				ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
-			mmc->capacity_gp[i] *= ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
-		}
 	}
 
 	err = mmc_set_capacity(mmc, mmc->part_num);
-- 
2.2.1



More information about the U-Boot mailing list