[U-Boot] [PATCH 0/5] keymile: enhance IVM reading

Valentin Longchamp valentin.longchamp at keymile.com
Tue Dec 23 14:08:52 CET 2014


All Keymile boards have an EEPROM that is called IVM that contain
information about the board that is progammed at production time.
One piece of information is the MAC addresses assigned to the board.

u-boot requires the MAC address of the ethernet interfaces it uses to be
defined when the interface is intialized. This is most of the time read
from the environment but in the case where only the default environment
is available, this must be read from somewhere else, in our case the
IVM.

This patch series splits the reading and analysis of the IVM content in
2, so that the IVM content and MAC addresses can be read prior to
ethernet initialization. The analysis of the rest of the IVM content
still happens at a later second stage.


Valentin Longchamp (5):
  kirkwood/km_arm: read the IVM eeprom earlier
  85xx/kmp204x: read the IVM eeprom earlier
  83xx/km83xx: read the IVM eeprom earlier
  82xx/km82xx: read the IVM eeprom earlier
  KM/IVM: remove ivm_read_eeprom(void)

 board/keymile/common/common.h   |  3 +--
 board/keymile/common/ivm.c      | 21 +--------------------
 board/keymile/km82xx/km82xx.c   | 10 +++++++++-
 board/keymile/km83xx/km83xx.c   |  5 ++++-
 board/keymile/km_arm/km_arm.c   |  6 +++++-
 board/keymile/kmp204x/kmp204x.c |  5 ++++-
 include/configs/km82xx.h        |  2 ++
 7 files changed, 26 insertions(+), 26 deletions(-)

-- 
1.8.0.1



More information about the U-Boot mailing list