[U-Boot] [PATCH 13/17] sunxi: A13-OLinuXino defconfigs: Enable VGA output, add lcd-mode for 7" LCD

[Hans de Goede]

Enable VGA output on the A13-OLinuXino and A13-OLinuXinoM now that we've
support for it.

Also add LCD timing and gpio info for the Olimex 7" LCD module. We can safely
put this in the default config on this boards, since by default we will always
use VGA, and the LCD timing info will only get used if the user explicitly
sets monitor=lcd in the video-mode env. variable.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 configs/A13-OLinuXinoM_defconfig | 9 +++++++--
 configs/A13-OLinuXino_defconfig  | 9 +++++++--
 2 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig
index be8652b..7790460 100644
--- a/configs/A13-OLinuXinoM_defconfig
+++ b/configs/A13-OLinuXinoM_defconfig
@@ -2,8 +2,13 @@ CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,USB_EHCI"
 CONFIG_FDTFILE="sun5i-a13-olinuxino-micro.dtb"
 CONFIG_USB1_VBUS_PIN="PG11"
-CONFIG_VIDEO=n
-CONFIG_USB_KEYBOARD=n
+CONFIG_VIDEO_HDMI=n
+CONFIG_VIDEO_VGA_VIA_LCD=y
+# For use with the Olimex 7" LCD module, adjust timings for other displays
+# Set video-mode=sunxi:800x600-24 at 60,monitor=lcd in the env. to enable
+CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:0,vmode:0"
+CONFIG_VIDEO_LCD_POWER="PB10"
+CONFIG_VIDEO_LCD_BL_PWM="PB2"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN5I=y
diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig
index 654e12a..944f2e5 100644
--- a/configs/A13-OLinuXino_defconfig
+++ b/configs/A13-OLinuXino_defconfig
@@ -2,8 +2,13 @@ CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER,USB_EHCI"
 CONFIG_FDTFILE="sun5i-a13-olinuxino.dtb"
 CONFIG_USB1_VBUS_PIN="PG11"
-CONFIG_VIDEO=n
-CONFIG_USB_KEYBOARD=n
+CONFIG_VIDEO_HDMI=n
+CONFIG_VIDEO_VGA_VIA_LCD=y
+# For use with the Olimex 7" LCD module, adjust timings for other displays
+# Set video-mode=sunxi:800x600-24 at 60,monitor=lcd in the env. to enable
+CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:0,vmode:0"
+CONFIG_VIDEO_LCD_POWER="AXP0-0"
+CONFIG_VIDEO_LCD_BL_PWM="PB2"
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_SUNXI=y
 +S:CONFIG_MACH_SUN5I=y
-- 
2.1.0