[U-Boot] [PATCH] sunxi: Fix CONFIG_UART0_PORT_F build and add it to menuconfig

[Hans de Goede]

Hi,

On 25-12-14 01:34, Siarhei Siamashka wrote:
> The CONFIG_UART0_PORT_F option has been supported since
>      http://git.denx.de/?p=u-boot.git;a=commit;h=ff2b47f6a9cc1025
>
> This option is primarily useful only for low level u-boot debugging
> on tablets, where normal UART0 is difficult to access and requires
> device disassembly and/or soldering.
>
> This patch now allows it to be selected from menuconfig. A dependency on
> SPL_FEL is added because u-boot does not support booting from NAND yet
> and also booting from SD card is impossible when a MicroSD breakout board
> is plugged into the SD slot.
>
> Additionally a compilation problem is fixed:
>
> common/spl/built-in.o: In function `spl_mmc_load_image':
> /tmp/u-boot-sunxi/common/spl/spl_mmc.c:94: undefined reference to `mmc_initialize'
> /tmp/u-boot-sunxi/common/spl/spl_mmc.c:96: undefined reference to `find_mmc_device'
> /tmp/u-boot-sunxi/common/spl/spl_mmc.c:104: undefined reference to `mmc_init'
> scripts/Makefile.spl:206: recipe for target 'spl/u-boot-spl' failed
>
> Signed-off-by: Siarhei Siamashka <siarhei.siamashka at gmail.com>

Thanks, I've queued this up in u-boot-sunxi/next for merging upstream.

Regards,

Hans

> ---
>   board/sunxi/Kconfig            | 12 ++++++++++++
>   include/configs/sunxi-common.h |  3 +++
>   2 files changed, 15 insertions(+)
>
> diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
> index 5a88ba0..7140b80 100644
> --- a/board/sunxi/Kconfig
> +++ b/board/sunxi/Kconfig
> @@ -178,6 +178,18 @@ config SPL_FEL
>   	depends on SPL
>   	default n
>
> +config UART0_PORT_F
> +	bool "UART0 on MicroSD breakout board"
> +	depends on SPL_FEL
> +	default n
> +	---help---
> +	Repurpose the SD card slot for getting access to the UART0 serial
> +	console. Primarily useful only for low level u-boot debugging on
> +	tablets, where normal UART0 is difficult to access and requires
> +	device disassembly and/or soldering. As the SD card can't be used
> +	at the same time, the system can be only booted in the FEL mode.
> +	Only enable this if you really know what you are doing.
> +
>   config FDTFILE
>   	string "Default fdtfile env setting for this board"
>
> diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
> index 3f890b2..f7e87a2 100644
> --- a/include/configs/sunxi-common.h
> +++ b/include/configs/sunxi-common.h
> @@ -160,7 +160,10 @@
>   #define CONFIG_SPL_MAX_SIZE		0x5fe0		/* 24KB on sun4i/sun7i */
>
>   #define CONFIG_SPL_LIBDISK_SUPPORT
> +
> +#if !defined(CONFIG_UART0_PORT_F)
>   #define CONFIG_SPL_MMC_SUPPORT
> +#endif
>
>   #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds"
>
>