[U-Boot] [PATCH v2 5/7] serial: ns16550: Support ns16550 compatible pci uart devices

[Bin Meng]

There are many pci uart devices which are ns16550 compatible. We can
describe them in the board dts file and use it as the U-Boot serial
console as specified in the chosen node 'stdout-path' property.

Those pci uart devices can have their register be memory mapped, or
i/o mapped. The driver will try to use memory mapped register if the
reg property in the node has an entry to describe the memory mapped
register, otherwise i/o mapped register will be used.

Signed-off-by: Bin Meng <bmeng.cn at gmail.com>

---

Changes in v2:
- New patch to support ns16550 compatible pci uart devices

 drivers/serial/ns16550.c | 33 ++++++++++++++++++++++++++++++++-
 1 file changed, 32 insertions(+), 1 deletion(-)

diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index af5beba..2001fac 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -289,10 +289,41 @@ int ns16550_serial_ofdata_to_platdata(struct udevice *dev)
 	struct ns16550_platdata *plat = dev->platdata;
 	fdt_addr_t addr;
 
+	/* try plb device first */
 	addr = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg");
-	if (addr == FDT_ADDR_T_NONE)
+	if (addr == FDT_ADDR_T_NONE) {
+#ifdef CONFIG_PCI
+		/* then try pci device */
+		struct fdt_pci_addr pci_addr;
+		u32 bar;
+		int ret;
+
+		/* we prefer to use memory mapped register */
+		ret = fdtdec_get_pci_addr(gd->fdt_blob, dev->of_offset,
+					  FDT_PCI_SPACE_MEM32, "reg",
+					  &pci_addr);
+		if (ret) {
+			/* try if there is any io mapped register */
+			ret = fdtdec_get_pci_addr(gd->fdt_blob,
+						  dev->of_offset,
+						  FDT_PCI_SPACE_IO,
+						  "reg", &pci_addr);
+			if (ret)
+				return ret;
+		}
+
+		ret = fdtdec_get_pci_bar32(gd->fdt_blob, dev->of_offset,
+					   &pci_addr, &bar);
+		if (ret)
+			return ret;
+
+		addr = bar;
+		goto cont;
+#endif
 		return -EINVAL;
+	}
 
+cont:
 	plat->base = addr;
 	plat->reg_shift = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
 					 "reg-shift", 1);
-- 
1.8.2.1