[U-Boot] coreboot uboot qemu x86
Ajoy Das
dasajoy80 at gmail.com
Tue Dec 30 06:45:12 CET 2014
I tried changing the boot rom size to 2MB.
But with no effect
coreboot.rom: 2048 kB, bootblocksize 944, romsize 2097152, offset 0x0
alignment: 64 bytes, architecture: x86
Name Offset Type Size
cmos_layout.bin 0x0 cmos_layout 1160
fallback/romstage 0x4c0 stage 17960
fallback/ramstage 0x4b40 stage 56190
config 0x12700 raw 2990
revision 0x13300 raw 692
(empty) 0x13600 null 2016728
HOSTCC cbfstool/rmodtool.o
Thanks
Ajoy
On Tue, Dec 30, 2014 at 4:17 AM, Simon Glass <sjg at chromium.org> wrote:
> Hi Ajoy,
>
> > On Mon, Dec 29, 2014 at 9:28 PM, Simon Glass <sjg at chromium.org> wrote:
> >
> >> Hi Ajoy,
> >>
> >>
> >> > On Mon, Dec 29, 2014 at 7:36 PM, Simon Glass <sjg at chromium.org>
> wrote:
> >> >>
> >> >> Hi,
> >> >>
> >> >> On 28 December 2014 at 21:38, Ajoy Das <dasajoy80 at gmail.com> wrote:
> >> >> > Hi
> >> >> >
> >> >> > Need Help
> >> >> >
> >> >> > I want to run U-BOOT as coreboot payload on QEMU platform
> >> >> >
> >> >> > I am on uboot-x86 git
> >> >> >
> >> >> > Compiled U-BOOT with make coreboot-x86_defconfig and make all
> >> >> >
> >> >> > Running qemu with
> >> >> > qemu-system-i386 -bios ../coreboot/build/coreboot.rom -hda disk.img
> >> >> > -nographic -m 1g
> >> >> >
> >> >> > But The system crashes with the following message
> >> >> >
> >> >> > qemu: fatal: Trying to execute code outside RAM or ROM at
> 0x5e2a36c2
> >> >> >
> >> >> > Loading Segment: addr: 0x0000000001110000 memsz: 0x00000000000588e8
> >> >> > filesz:
> >> >> > 0x00000000000252eb
> >> >> > lb: [0x0000000000100000, 0x000000000012b030)
> >> >> > Post relocation: addr: 0x0000000001110000 memsz: 0x00000000000588e8
> >> >> > filesz:
> >> >> > 0x00000000000252eb
> >> >> > using LZMA
> >> >> > [ 0x01110000, 011688e8, 0x011688e8) <- fffd2770
> >> >> > dest 01110000, end 011688e8, bouncebuffer 3ff77000
> >> >> > Loaded segments
> >> >> > Jumping to boot code at 01110015
> >> >> > CPU0: stack: 00126000 - 00127000, lowest used address 00126b8c,
> stack
> >> >> > used:
> >> >> > 1140 bytes
> >> >> > entry = 0x01110015
> >> >> > lb_start = 0x00100000
> >> >> > lb_size = 0x0002b030
> >> >> > buffer = 0x3ff77000
> >> >> > qemu: fatal: Trying to execute code outside RAM or ROM at
> 0x5e2a36c2
> >> >> >
> >> >> > EAX=0000000a EBX=000186a0 ECX=01145d15 EDX=19203eb0
> >> >> > ESI=00000000 EDI=00000000 EBP=01145f6c ESP=01145f54
> >> >> > EIP=5e2a36c2 EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0
> >> >> > ES =0018 00000000 ffffffff 00cf9300 DPL=0 DS [-WA]
> >> >> > CS =0010 00000000 ffffffff 00cf9b00 DPL=0 CS32 [-RA]
> >> >> > SS =0018 00000000 ffffffff 00cf9300 DPL=0 DS [-WA]
> >> >> > DS =0018 00000000 ffffffff 00cf9300 DPL=0 DS [-WA]
> >> >> > FS =0020 19203f5c ffffffff 00cf9300 DPL=0 DS [-WA]
> >> >> > GS =0018 00000000 ffffffff 00cf9300 DPL=0 DS [-WA]
> >> >> > LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
> >> >> > TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
> >> >> > GDT= 19203e60 00000047
> >> >> > IDT= 00000000 00000000
> >> >> > CR0=60000033 CR2=00000000 CR3=00000000 CR4=00000000
> >> >> > DR0=00000000 DR1=00000000 DR2=00000000 DR3=00000000
> >> >> > DR6=ffff0ff0 DR7=00000400
> >> >> > CCS=00000218 CCD=01145f50 CCO=ADDL
> >> >> > EFER=0000000000000000
> >> >> > FCW=037f FSW=0000 [ST=0] FTW=00 MXCSR=00001f80
> >> >> > FPR0=0000000000000000 0000 FPR1=0000000000000000 0000
> >> >> > FPR2=0000000000000000 0000 FPR3=0000000000000000 0000
> >> >> > FPR4=0000000000000000 0000 FPR5=0000000000000000 0000
> >> >> > FPR6=0000000000000000 0000 FPR7=0000000000000000 0000
> >> >> > XMM00=00000000000000000000000000000000
> >> >> > XMM01=00000000000000000000000000000000
> >> >> > XMM02=00000000000000000000000000000000
> >> >> > XMM03=00000000000000000000000000000000
> >> >> > XMM04=00000000000000000000000000000000
> >> >> > XMM05=00000000000000000000000000000000
> >> >> > XMM06=00000000000000000000000000000000
> >> >> > XMM07=00000000000000000000000000000000
> >> >> > Aborted (core dumped)
> >> >> >
> >> >> > qemu-system-i386 --version
> >> >> > QEMU emulator version 1.0 (qemu-kvm-1.0), Copyright (c) 2003-2008
> >> >> > Fabrice
> >> >> > Bellard
> >> >> >
> >> >> > Is QEMU not supported for coreboot and u-boot
> >> >>
> >> >> I'm not sure it's been tried but there's no reason why it should
> work.
> >> >> It seems to be crashing in U-Boot before there is any serial output.
> >> >> Did you put u-boot-dtb.bin as the payload?
>
> >> On 29 December 2014 at 07:34, Ajoy Das <dasajoy80 at gmail.com> wrote:
> >> > Hi Simon
> >> >
> >> > Thanks for your reply
> >> >
> >> > I have added u-boot ELF as the coreboot payload
> >> >
> >> > u-boot: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV),
> >> > statically linked, not stripped.
> >> >
> >> > Got this link but its a year old.
> >> > http://lists.denx.de/pipermail/u-boot/2013-July/159140.html
> >> >
> >> > Thanks
> >> > Ajoy
> >> >
> >>
> [snip]
> >>
> >> I suggest using cbfstool add-flat-binary -f u-boot-dtb.bin -n
> >> fallback/payload -c lzma -l <text_base> -e <entry>
> >>
> >> For text_base use CONFIG_SYS_TEXT_BASE which is probably 1110000
> >>
> >> For entry use _start which is probably 1110015.
> >>
> >> Of course I'm not sure whether your problem is with Coreboot, U-Boot
> >> or qemu, but we'll see.
> >>
> >> Also, please can you reply to the list with instructions when you get
> >> it working, or send a patch to doc/README.x86.
>
> PLEASE add your reply below mine, not above. I have gone to the
> trouble of rearranging the thread for this email.
>
> Also leave me on Cc otherwise I might not see your reply.
>
> On 29 December 2014 at 14:31, Ajoy Das <dasajoy80 at gmail.com> wrote:
> > Hi Simon
> >
> > I executed the commands mentioned above. But getting LZMA decode error on
> > coreboot
> >
> > coreboot.rom: 256 kB, bootblocksize 944, romsize 262144, offset 0x0
> > alignment: 64 bytes, architecture: x86
> >
> > Name Offset Type Size
> > cmos_layout.bin 0x0 cmos_layout 1160
> > fallback/romstage 0x4c0 stage 17960
> > fallback/ramstage 0x4b40 stage 56161
> > config 0x12700 raw 2986
> > revision 0x13300 raw 692
> > (empty) 0x13600 null 181720
> >
> >
> >
> > ./cbfstool ../../coreboot.rom add-flat-binary
> > -v
> > -f /home/ajoy/CISCO-2/uboot/u-boot/u-boot-dtb.bin
> > -n fallback/payload
> > -c lzma
> > -l 01110000
> > -e 1110015
> >
> > fallback/payload 0x13600 payload 173965
> > code (LZMA compression, offset: 0x38, load: 0x49000, length:
> > 173909/391062)
> > entry (0x10efff)
> > (empty) 0x3de00 null 7640
> >
> >
> > Wrote coreboot table at: 3ffce000, 0x154 bytes, checksum 8ea6
> > coreboot table: 364 bytes.
> > CBMEM ROOT 0. 3ffff000 00001000
> > CAR GLOBALS 1. 3fffe000 00001000
> > ROMSTAGE 2. 3fffd000 00001000
> > GDT 3. 3fffc000 00001000
> > IRQ TABLE 4. 3fffb000 00001000
> > ACPI 5. 3ffd7000 00024000
> > SMBIOS 6. 3ffd6000 00001000
> > COREBOOT 7. 3ffce000 00008000
> > CBFS: located payload @ fffd3638, 173965 bytes.
> > Loading segment from rom address 0xfffd3638
> > code (compression=1)
> > New segment dstaddr 0x49000 memsize 0x5f796 srcaddr 0xfffd3670 filesize
> > 0x2a755
> > (cleaned up) New segment addr 0x49000 size 0x5f796 offset 0xfffd3670
> > filesize 0x2a755
> > Loading segment from rom address 0xfffd3654
> > Entry Point 0x0010efff
> > Payload being loaded below 1MiB without region being marked as RAM
> usable.
> > Bounce Buffer at 3ff77000, 352352 bytes
> > Loading Segment: addr: 0x0000000000049000 memsz: 0x000000000005f796
> filesz:
> > 0x000000000002a755
> > lb: [0x0000000000100000, 0x000000000012b030)
> > Post relocation: addr: 0x0000000000049000 memsz: 0x000000000005f796
> filesz:
> > 0x000000000002a755
> > using LZMA
> > lzma: Decoding error = 1
> > Could not load payload
>
> Do you really have a 256KB ROM? That seems much too small to hold
> Coreboot and U-Boot. It looks like U-Boot alone is 173KB.
>
> Regards,
> Simon
>
More information about the U-Boot
mailing list