[U-Boot] [PATCH] phylib: add support for aquantia PHYs
shh.xie at gmail.com
shh.xie at gmail.com
Tue Dec 30 11:32:04 CET 2014
From: Shaohui Xie <Shaohui.Xie at freescale.com>
This patch supports AQ1202, AQ2104, AQR105 PHY.
Signed-off-by: Shaohui Xie <Shaohui.Xie at freescale.com>
---
drivers/net/phy/Makefile | 1 +
drivers/net/phy/aquantia.c | 156 +++++++++++++++++++++++++++++++++++++++++++++
drivers/net/phy/phy.c | 3 +
include/phy.h | 1 +
4 files changed, 161 insertions(+)
create mode 100644 drivers/net/phy/aquantia.c
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 9556536..87d5c9c 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_MV88E6352_SWITCH) += mv88e6352.o
obj-$(CONFIG_PHYLIB) += phy.o
obj-$(CONFIG_PHYLIB_10G) += generic_10g.o
+obj-$(CONFIG_PHY_AQUANTIA) += aquantia.o
obj-$(CONFIG_PHY_ATHEROS) += atheros.o
obj-$(CONFIG_PHY_BROADCOM) += broadcom.o
obj-$(CONFIG_PHY_DAVICOM) += davicom.o
diff --git a/drivers/net/phy/aquantia.c b/drivers/net/phy/aquantia.c
new file mode 100644
index 0000000..ef4da4e
--- /dev/null
+++ b/drivers/net/phy/aquantia.c
@@ -0,0 +1,156 @@
+/*
+ * Aquantia PHY drivers
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ */
+#include <config.h>
+#include <common.h>
+#include <phy.h>
+
+#ifndef CONFIG_PHYLIB_10G
+#error The Aquantia PHY needs 10G support
+#endif
+
+#define AQUNTIA_10G_CTL 0x20
+#define AQUNTIA_VENDOR_P1 0xc400
+
+#define AQUNTIA_SPEED_LSB_MASK 0x2000
+#define AQUNTIA_SPEED_MSB_MASK 0x40
+
+int aquantia_config(struct phy_device *phydev)
+{
+ u32 val = phy_read(phydev, MDIO_MMD_PMAPMD, MII_BMCR);
+
+ if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
+ /* 1000BASE-T mode */
+ phydev->advertising = SUPPORTED_1000baseT_Full;
+ phydev->supported = phydev->advertising;
+
+ val = (val & ~AQUNTIA_SPEED_LSB_MASK) | AQUNTIA_SPEED_MSB_MASK;
+ phy_write(phydev, MDIO_MMD_PMAPMD, MII_BMCR, val);
+ } else if (phydev->interface == PHY_INTERFACE_MODE_XGMII) {
+ /* 10GBASE-T mode */
+ phydev->advertising = SUPPORTED_10000baseT_Full;
+ phydev->supported = phydev->advertising;
+
+ if (!(val & AQUNTIA_SPEED_LSB_MASK) ||
+ !(val & AQUNTIA_SPEED_MSB_MASK))
+ phy_write(phydev, MDIO_MMD_PMAPMD, MII_BMCR,
+ AQUNTIA_SPEED_LSB_MASK |
+ AQUNTIA_SPEED_MSB_MASK);
+ } else if (phydev->interface == PHY_INTERFACE_MODE_SGMII_2500) {
+ /* 2.5GBASE-T mode */
+ phydev->advertising = SUPPORTED_1000baseT_Full;
+ phydev->supported = phydev->advertising;
+
+ phy_write(phydev, MDIO_MMD_AN, AQUNTIA_10G_CTL, 1);
+ phy_write(phydev, MDIO_MMD_AN, AQUNTIA_VENDOR_P1, 0x9440);
+ } else if (phydev->interface == PHY_INTERFACE_MODE_MII) {
+ /* 100BASE-TX mode */
+ phydev->advertising = SUPPORTED_100baseT_Full;
+ phydev->supported = phydev->advertising;
+
+ val = (val & ~AQUNTIA_SPEED_MSB_MASK) | AQUNTIA_SPEED_LSB_MASK;
+ phy_write(phydev, MDIO_MMD_PMAPMD, MII_BMCR, val);
+ }
+ return 0;
+}
+
+int aquantia_startup(struct phy_device *phydev)
+{
+ u32 reg, speed;
+ int i = 0;
+
+ phydev->duplex = DUPLEX_FULL;
+
+ /* if the AN is still in progress, wait till timeout. */
+ phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1);
+ reg = phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1);
+ if (!(reg & MDIO_AN_STAT1_COMPLETE)) {
+ printf("%s Waiting for PHY auto negotiation to complete",
+ phydev->dev->name);
+ do {
+ udelay(1000);
+ reg = phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1);
+ if ((i++ % 500) == 0)
+ printf(".");
+ } while (!(reg & MDIO_AN_STAT1_COMPLETE) &&
+ i < (4 * PHY_ANEG_TIMEOUT));
+
+ if (i > PHY_ANEG_TIMEOUT)
+ printf(" TIMEOUT !\n");
+ }
+
+ /* Read twice because link state is latched and a
+ * read moves the current state into the register */
+ phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1);
+ reg = phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1);
+ if (reg < 0 || !(reg & MDIO_STAT1_LSTATUS))
+ phydev->link = 0;
+ else
+ phydev->link = 1;
+
+ speed = phy_read(phydev, MDIO_MMD_PMAPMD, MII_BMCR);
+ if (speed & AQUNTIA_SPEED_MSB_MASK) {
+ if (speed & AQUNTIA_SPEED_LSB_MASK)
+ phydev->speed = SPEED_10000;
+ else
+ phydev->speed = SPEED_1000;
+ } else {
+ if (speed & AQUNTIA_SPEED_LSB_MASK)
+ phydev->speed = SPEED_100;
+ else
+ phydev->speed = SPEED_10;
+ }
+
+ return 0;
+}
+
+struct phy_driver aq1202_driver = {
+ .name = "Aquantia AQ1202",
+ .uid = 0x3a1b445,
+ .mask = 0xfffffff0,
+ .features = PHY_10G_FEATURES,
+ .mmds = (MDIO_MMD_PMAPMD | MDIO_MMD_PCS|
+ MDIO_MMD_PHYXS | MDIO_MMD_AN |
+ MDIO_MMD_VEND1),
+ .config = &aquantia_config,
+ .startup = &aquantia_startup,
+ .shutdown = &gen10g_shutdown,
+};
+
+struct phy_driver aq2104_driver = {
+ .name = "Aquantia AQ2104",
+ .uid = 0x3a1b460,
+ .mask = 0xfffffff0,
+ .features = PHY_10G_FEATURES,
+ .mmds = (MDIO_MMD_PMAPMD | MDIO_MMD_PCS|
+ MDIO_MMD_PHYXS | MDIO_MMD_AN |
+ MDIO_MMD_VEND1),
+ .config = &aquantia_config,
+ .startup = &aquantia_startup,
+ .shutdown = &gen10g_shutdown,
+};
+
+struct phy_driver aqr105_driver = {
+ .name = "Aquantia AQR105",
+ .uid = 0x3a1b4a2,
+ .mask = 0xfffffff0,
+ .features = PHY_10G_FEATURES,
+ .mmds = (MDIO_MMD_PMAPMD | MDIO_MMD_PCS|
+ MDIO_MMD_PHYXS | MDIO_MMD_AN |
+ MDIO_MMD_VEND1),
+ .config = &aquantia_config,
+ .startup = &aquantia_startup,
+ .shutdown = &gen10g_shutdown,
+};
+int phy_aquantia_init(void)
+{
+ phy_register(&aq1202_driver);
+ phy_register(&aq2104_driver);
+ phy_register(&aqr105_driver);
+
+ return 0;
+}
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 1d6c14f..7b75f85 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -442,6 +442,9 @@ static LIST_HEAD(phy_drivers);
int phy_init(void)
{
+#ifdef CONFIG_PHY_AQUANTIA
+ phy_aquantia_init();
+#endif
#ifdef CONFIG_PHY_ATHEROS
phy_atheros_init();
#endif
diff --git a/include/phy.h b/include/phy.h
index 2fcc328..c84a441 100644
--- a/include/phy.h
+++ b/include/phy.h
@@ -221,6 +221,7 @@ int gen10g_startup(struct phy_device *phydev);
int gen10g_shutdown(struct phy_device *phydev);
int gen10g_discover_mmds(struct phy_device *phydev);
+int phy_aquantia_init(void);
int phy_atheros_init(void);
int phy_broadcom_init(void);
int phy_davicom_init(void);
--
2.1.0.27.g96db324
More information about the U-Boot
mailing list