[U-Boot] [PULL] Please pull u-boot-imx

[Stefano Babic]

Hi Tom,

some minor fixes from i.MX side - please pull from u-boot-imx, thanks !

The following changes since commit 125738e819a3b9d15210794b3dcef9f4d9bcf866:

  Prepare v2015.01-rc4 (2014-12-29 21:22:38 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 87e47e905887b91c0505495cc6bbab70ba266d51:

  mx6slevk: Remove get_board_rev() (2014-12-30 14:10:39 +0100)

----------------------------------------------------------------
Christian Gmeiner (2):
      ot1200: add fsuuid command
      ot1200: enable support for USB_STORAGE

Fabio Estevam (2):
      mx51evk: Fix MX51EVK_USB_CLK_EN_B definition
      mx6slevk: Remove get_board_rev()

Iain Paton (2):
      embestmx6boards: convert to use config_distro_defaults.h
      embestmx6boards: convert to use config_distro_bootcmd.h

Jan Luebbe (1):
      arm: mxs: olinuxino: move DRAM config tuning to SPL

Marek Vasut (8):
      imx: i2c: Zap unnecessary malloc() calls
      arm: mx6: gw_ventana: Define CONFIG_SYS_MALLOC_F_LEN
      arm: mx6: novena: Define CONFIG_SYS_MALLOC_F_LEN
      arm: mx6: novena: Minor coding style fix
      arm: mx6: novena: Minor config file fix
      arm: mx6: novena: Pull GPIO definitions into header
      arm: mx6: novena: Pull video handling into separate file
      arm: mx6: novena: Add proper LVDS display support

Peng Fan (3):
      imx:mx6 fix return value of mxc_get_clock
      imx:mx6sabresd add board level support for usb
      imx:mx6qarm2 add board level support for usb

Pierre Aubert (1):
      imx SPL: enable boot from eMMC boot partitions.

Stefan Roese (1):
      arm: mx6: gw_ventana: Change clock init to enable NAND related clocks

Stefano Babic (1):
      Merge branch 'master' of git://git.denx.de/u-boot

 arch/arm/cpu/armv7/mx6/clock.c               |   3 +-
 arch/arm/imx-common/i2c-mxv7.c               |  24 +-
 arch/arm/imx-common/spl.c                    |   4 +-
 board/freescale/mx51evk/mx51evk.c            |   2 +-
 board/freescale/mx6qarm2/mx6qarm2.c          |  42 +++
 board/freescale/mx6sabresd/mx6sabresd.c      |  68 ++++
 board/freescale/mx6slevk/mx6slevk.c          |   5 -
 board/gateworks/gw_ventana/gw_ventana_spl.c  |   2 +-
 board/kosagi/novena/Makefile                 |   1 +
 board/kosagi/novena/novena.c                 |  93 +-----
 board/kosagi/novena/novena.h                 |  33 ++
 board/kosagi/novena/novena_spl.c             |  17 +-
 board/kosagi/novena/video.c                  | 456
+++++++++++++++++++++++++++
 board/olimex/mx23_olinuxino/mx23_olinuxino.c |  30 --
 board/olimex/mx23_olinuxino/spl_boot.c       |  30 ++
 include/configs/embestmx6boards.h            | 189 +++--------
 include/configs/gw_ventana.h                 |   1 +
 include/configs/mx6qarm2.h                   |  14 +
 include/configs/mx6sabresd.h                 |  14 +
 include/configs/novena.h                     |   3 +-
 include/configs/ot1200.h                     |   3 +
 21 files changed, 742 insertions(+), 292 deletions(-)
 create mode 100644 board/kosagi/novena/novena.h
 create mode 100644 board/kosagi/novena/video.c


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================