[U-Boot] [PATCH v2 2/5] sun7i: Add support for taking CPUs offline via PSCI
Jan Kiszka
jan.kiszka at web.de
Tue Dec 30 18:14:13 CET 2014
From: Jan Kiszka <jan.kiszka at siemens.com>
Based on the original version by Marc Zyngier. It adds a psci_cpu_off
implementation for the A20 SoC. The mechanism works by first preparing
the calling CPU to go offline (disable and flush cache, disable SMP),
then requesting CPU 0 to pull the plug. The request is sent as FIQ on
SGI15.
Signed-off-by: Jan Kiszka <jan.kiszka at siemens.com>
---
arch/arm/cpu/armv7/sunxi/psci.S | 170 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 170 insertions(+)
diff --git a/arch/arm/cpu/armv7/sunxi/psci.S b/arch/arm/cpu/armv7/sunxi/psci.S
index a84807d..0aa4007 100644
--- a/arch/arm/cpu/armv7/sunxi/psci.S
+++ b/arch/arm/cpu/armv7/sunxi/psci.S
@@ -18,6 +18,7 @@
*/
#include <config.h>
+#include <asm/gic.h>
#include <asm/psci.h>
#include <asm/arch/cpu.h>
@@ -38,6 +39,8 @@
#define ONE_MS (CONFIG_SYS_CLK_FREQ / 1000)
#define TEN_MS (10 * ONE_MS)
+#define GICD_BASE 0x1c81000
+#define GICC_BASE 0x1c82000
.macro timer_wait reg, ticks
@ Program CNTP_TVAL
@@ -61,7 +64,27 @@
.globl psci_arch_init
psci_arch_init:
+ movw r4, #(GICD_BASE & 0xffff)
+ movt r4, #(GICD_BASE >> 16)
+
+ ldr r5, [r4, #GICD_IGROUPRn]
+ bic r5, r5, #(1 << 15) @ SGI15 as Group-0
+ str r5, [r4, #GICD_IGROUPRn]
+
+ mov r5, #0 @ Set SGI15 priority to 0
+ strb r5, [r4, #(GICD_IPRIORITYRn + 15)]
+
+ add r4, r4, #0x1000 @ GICC address
+
+ mov r5, #0xff
+ str r5, [r4, #GICC_PMR] @ Be cool with non-secure
+
+ ldr r5, [r4, #GICC_CTLR]
+ orr r5, r5, #(1 << 3) @ Switch FIQEn on
+ str r5, [r4, #GICC_CTLR]
+
mrc p15, 0, r5, c1, c1, 0 @ Read SCR
+ orr r5, r5, #4 @ Enable FIQ in monitor mode
bic r5, r5, #1 @ Secure mode
mcr p15, 0, r5, c1, c1, 0 @ Write SCR
isb
@@ -79,6 +102,77 @@ psci_arch_init:
bx lr
+.globl psci_fiq_enter
+psci_fiq_enter:
+ push {r0-r12}
+
+ @ Switch to secure
+ mrc p15, 0, r7, c1, c1, 0
+ bic r8, r7, #1
+ mcr p15, 0, r8, c1, c1, 0
+ isb
+
+ movw r8, #(GICC_BASE & 0xffff)
+ movt r8, #(GICC_BASE >> 16)
+ ldr r9, [r8, #GICC_IAR]
+ movw r10, #0x3ff
+ movt r10, #0
+ cmp r9, r10
+ beq out
+ movw r10, #0x3fe
+ cmp r9, r10
+ beq out
+ str r9, [r8, #GICC_EOIR]
+ dsb
+
+ @ Compute CPU number
+ lsr r9, r9, #10
+ and r9, r9, #0xf
+
+ movw r8, #(SUN7I_CPUCFG_BASE & 0xffff)
+ movt r8, #(SUN7I_CPUCFG_BASE >> 16)
+
+ @ Wait for the core to enter WFI
+ lsl r11, r9, #6 @ x64
+ add r11, r11, r8
+
+1: ldr r10, [r11, #0x48]
+ tst r10, #(1 << 2)
+ bne 2f
+ timer_wait r10, ONE_MS
+ b 1b
+
+ @ Reset CPU
+2: mov r10, #0
+ str r10, [r11, #0x40]
+
+ @ Lock CPU
+ mov r10, #1
+ lsl r9, r10, r9 @ r9 is now CPU mask
+ ldr r10, [r8, #0x1e4]
+ bic r10, r10, r9
+ str r10, [r8, #0x1e4]
+
+ @ Set power gating
+ ldr r10, [r8, #0x1b4]
+ orr r10, r10, #1
+ str r10, [r8, #0x1b4]
+ timer_wait r10, ONE_MS
+
+ @ Activate power clamp
+ mov r10, #1
+1: str r10, [r8, #0x1b0]
+ lsl r10, r10, #1
+ orr r10, r10, #1
+ tst r10, #0x100
+ beq 1b
+
+ @ Restore security level
+out: mcr p15, 0, r7, c1, c1, 0
+
+ pop {r0-r12}
+ subs pc, lr, #4
+
@ r1 = target CPU
@ r2 = target PC
.globl psci_cpu_on
@@ -144,6 +238,53 @@ psci_cpu_on:
_target_pc:
.word 0
+/* Imported from Linux kernel */
+v7_flush_dcache_all:
+ dmb @ ensure ordering with previous memory accesses
+ mrc p15, 1, r0, c0, c0, 1 @ read clidr
+ ands r3, r0, #0x7000000 @ extract loc from clidr
+ mov r3, r3, lsr #23 @ left align loc bit field
+ beq finished @ if loc is 0, then no need to clean
+ mov r10, #0 @ start clean at cache level 0
+flush_levels:
+ add r2, r10, r10, lsr #1 @ work out 3x current cache level
+ mov r1, r0, lsr r2 @ extract cache type bits from clidr
+ and r1, r1, #7 @ mask of the bits for current cache only
+ cmp r1, #2 @ see what cache we have at this level
+ blt skip @ skip if no cache, or just i-cache
+ mrs r9, cpsr @ make cssr&csidr read atomic
+ mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
+ isb @ isb to sych the new cssr&csidr
+ mrc p15, 1, r1, c0, c0, 0 @ read the new csidr
+ msr cpsr_c, r9
+ and r2, r1, #7 @ extract the length of the cache lines
+ add r2, r2, #4 @ add 4 (line length offset)
+ ldr r4, =0x3ff
+ ands r4, r4, r1, lsr #3 @ find maximum number on the way size
+ clz r5, r4 @ find bit position of way size increment
+ ldr r7, =0x7fff
+ ands r7, r7, r1, lsr #13 @ extract max number of the index size
+loop1:
+ mov r9, r7 @ create working copy of max index
+loop2:
+ orr r11, r10, r4, lsl r5 @ factor way and cache number into r11
+ orr r11, r11, r9, lsl r2 @ factor index number into r11
+ mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way
+ subs r9, r9, #1 @ decrement the index
+ bge loop2
+ subs r4, r4, #1 @ decrement the way
+ bge loop1
+skip:
+ add r10, r10, #2 @ increment cache number
+ cmp r3, r10
+ bgt flush_levels
+finished:
+ mov r10, #0 @ swith back to cache level 0
+ mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
+ dsb st
+ isb
+ bx lr
+
_sunxi_cpu_entry:
@ Set SMP bit
mrc p15, 0, r0, c1, c0, 1
@@ -158,5 +299,34 @@ _sunxi_cpu_entry:
ldr r0, [r0]
b _do_nonsec_entry
+.globl psci_cpu_off
+psci_cpu_off:
+ mrc p15, 0, r0, c1, c0, 0 @ SCTLR
+ bic r0, r0, #(1 << 2) @ Clear C bit
+ mcr p15, 0, r0, c1, c0, 0 @ SCTLR
+ isb
+ dsb
+
+ bl v7_flush_dcache_all
+
+ clrex @ Why???
+
+ mrc p15, 0, r0, c1, c0, 1 @ ACTLR
+ bic r0, r0, #(1 << 6) @ Clear SMP bit
+ mcr p15, 0, r0, c1, c0, 1 @ ACTLR
+ isb
+ dsb
+
+ @ Ask CPU0 to pull the rug...
+ movw r0, #(GICD_BASE & 0xffff)
+ movt r0, #(GICD_BASE >> 16)
+ movw r1, #15 @ SGI15
+ movt r1, #1 @ Target is CPU0
+ str r1, [r0, #GICD_SGIR]
+ dsb
+
+1: wfi
+ b 1b
+
text_end:
.popsection
--
1.8.4.5
More information about the U-Boot
mailing list