[U-Boot] [PATCH] imx:mx6slevk add spi nor boot support

[Peng Fan]

Hi Jagan,

On 12/30/2014 8:38 PM, Jagan Teki wrote:
> On 30 December 2014 at 08:44, Peng Fan <Peng.Fan at freescale.com> wrote:
>> Add spi nor boot support for mx6slevk board.
>>
>> Signed-off-by: Peng Fan <Peng.Fan at freescale.com>
>> ---
>>   board/freescale/mx6slevk/MAINTAINERS |  1 +
>>   configs/mx6slevk_spinor_defconfig    |  3 +++
>>   include/configs/mx6slevk.h           | 13 ++++++++++++-
>>   3 files changed, 16 insertions(+), 1 deletion(-)
>>   create mode 100644 configs/mx6slevk_spinor_defconfig
>>
>> diff --git a/board/freescale/mx6slevk/MAINTAINERS b/board/freescale/mx6slevk/MAINTAINERS
>> index 660af91..18d31a8 100644
>> --- a/board/freescale/mx6slevk/MAINTAINERS
>> +++ b/board/freescale/mx6slevk/MAINTAINERS
>> @@ -4,3 +4,4 @@ S:      Maintained
>>   F:     board/freescale/mx6slevk/
>>   F:     include/configs/mx6slevk.h
>>   F:     configs/mx6slevk_defconfig
>> +F:     configs/mx6slevk_spinor_defconfig
>> diff --git a/configs/mx6slevk_spinor_defconfig b/configs/mx6slevk_spinor_defconfig
>> new file mode 100644
>> index 0000000..93efe73
>> --- /dev/null
>> +++ b/configs/mx6slevk_spinor_defconfig
>> @@ -0,0 +1,3 @@
>> +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL,SYS_BOOT_SPINOR"
>> +CONFIG_ARM=y
>> +CONFIG_TARGET_MX6SLEVK=y
>> diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
>> index e3e7f76..e6c4130 100644
>> --- a/include/configs/mx6slevk.h
>> +++ b/include/configs/mx6slevk.h
>> @@ -187,9 +187,20 @@
>>   /* FLASH and environment organization */
>>   #define CONFIG_SYS_NO_FLASH
>>
>> -#define CONFIG_ENV_OFFSET              (6 * SZ_64K)
>>   #define CONFIG_ENV_SIZE                        SZ_8K
>> +
>> +#if defined CONFIG_SYS_BOOT_SPINOR
>> +#define CONFIG_ENV_IS_IN_SPI_FLASH
>> +#define CONFIG_ENV_OFFSET               (768 * 1024)
>> +#define CONFIG_ENV_SECT_SIZE            (64 * 1024)
>> +#define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
>> +#define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
>> +#define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
>> +#define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
>
> If you need default values may be you couldn't define these so-that
> common/env_sf.c
> will take the defaults for undefs - please check.
>

Default values are defined in mx6slevk.h

#define CONFIG_SF_DEFAULT_BUS  0
#define CONFIG_SF_DEFAULT_CS   0
#define CONFIG_SF_DEFAULT_SPEED 20000000
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0

In env_sf.c
I did not see any undefs, there is only a piece of code like:
#ifndef CONFIG_ENV_SPI_BUS
#define CONFIG_ENV_SPI_BUS 0
#endif

>> +#else
>> +#define CONFIG_ENV_OFFSET              (6 * SZ_64K)
>>   #define CONFIG_ENV_IS_IN_MMC
>> +#endif
>>
>>   #define CONFIG_OF_LIBFDT
>>   #define CONFIG_CMD_BOOTZ
>> --
>> 1.8.4
>>
>
> thanks!
>
Regards,
Peng Fan