[U-Boot] [PATCH v4 01/10] spl: nand: add support for mxs nand

Tim Harvey tharvey at gateworks.com
Tue Jun 3 01:13:18 CEST 2014


This utilizes existing mxs_nand support layer to provide a method to load an
image off nand for SPL. The flash device will be detected in order to support
multiple flash devices instead of having layout hard coded at build time.

Cc: Stefan Roese <sr at denx.de>
Cc: Otavio Salvador <otavio at ossystems.com.br>
Cc: Andy Ng <andreas2025 at gmail.com>
Cc: Eric Nelson <eric.nelson at boundarydevices.com>
Cc: Tapani Utriainen <tapani at technexion.com>
Cc: Tom Rini <trini at ti.com>
Cc: Scott Wood <scottwood at freescale.com>

Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
v4:
 - removed unnecessary parens from return

v3:
 - removed NAND_NCE and NAND_CTRL_CHANGE unused by mxc_nand.c
 - return specific error types on errors
 - remove register keyword - let compiler do optimizations

v2:
 - remove dependence on mtdpart, mtdcore, nand_util, nand_ecc, nand_base
   and nand_bbt to bring SPL down in size. This reduced codesize by about 32k
   where now mxs_spl_nand is about 12k total.

---
 drivers/mtd/nand/Makefile       |   1 +
 drivers/mtd/nand/mxs_nand_spl.c | 231 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 232 insertions(+)
 create mode 100644 drivers/mtd/nand/mxs_nand_spl.c

diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 4eb354d..bf1312a 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -68,5 +68,6 @@ else  # minimal SPL drivers
 obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_spl.o
 obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_spl.o
 obj-$(CONFIG_NAND_MXC) += mxc_nand_spl.o
+obj-$(CONFIG_NAND_MXS) += mxs_nand_spl.o mxs_nand.o
 
 endif # drivers
diff --git a/drivers/mtd/nand/mxs_nand_spl.c b/drivers/mtd/nand/mxs_nand_spl.c
new file mode 100644
index 0000000..0e7c364
--- /dev/null
+++ b/drivers/mtd/nand/mxs_nand_spl.c
@@ -0,0 +1,231 @@
+/*
+ * Copyright (C) 2014 Gateworks Corporation
+ * Author: Tim Harvey <tharvey at gateworks.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <nand.h>
+#include <malloc.h>
+
+static nand_info_t mtd;
+static struct nand_chip nand_chip;
+
+static void mxs_nand_command(struct mtd_info *mtd, unsigned int command,
+			     int column, int page_addr)
+{
+	register struct nand_chip *chip = mtd->priv;
+	u32 timeo, time_start;
+
+	/* write out the command to the device */
+	chip->cmd_ctrl(mtd, command, NAND_CLE);
+
+	/* Serially input address */
+	if (column != -1) {
+		chip->cmd_ctrl(mtd, column, NAND_ALE);
+		chip->cmd_ctrl(mtd, column >> 8, NAND_ALE);
+	}
+	if (page_addr != -1) {
+		chip->cmd_ctrl(mtd, page_addr, NAND_ALE);
+		chip->cmd_ctrl(mtd, page_addr >> 8, NAND_ALE);
+		/* One more address cycle for devices > 128MiB */
+		if (chip->chipsize > (128 << 20))
+			chip->cmd_ctrl(mtd, page_addr >> 16, NAND_ALE);
+	}
+	chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0);
+
+	if (command == NAND_CMD_READ0) {
+		chip->cmd_ctrl(mtd, NAND_CMD_READSTART, NAND_CLE);
+		chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0);
+	}
+
+	/* wait for nand ready */
+	ndelay(100);
+	timeo = (CONFIG_SYS_HZ * 20) / 1000;
+	time_start = get_timer(0);
+	while (get_timer(time_start) < timeo) {
+		if (chip->dev_ready(mtd))
+			break;
+	}
+}
+
+static int mxs_flash_ident(struct mtd_info *mtd)
+{
+	register struct nand_chip *chip = mtd->priv;
+	int i;
+	u8 mfg_id, dev_id;
+	u8 id_data[8];
+	struct nand_onfi_params *p = &chip->onfi_params;
+
+	/* Reset the chip */
+	chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+
+	/* Send the command for reading device ID */
+	chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
+
+	/* Read manufacturer and device IDs */
+	mfg_id = chip->read_byte(mtd);
+	dev_id = chip->read_byte(mtd);
+
+	/* Try again to make sure */
+	chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
+	for (i = 0; i < 8; i++)
+		id_data[i] = chip->read_byte(mtd);
+	if (id_data[0] != mfg_id || id_data[1] != dev_id) {
+		printf("second ID read did not match");
+		return -1;
+	}
+	debug("0x%02x:0x%02x ", mfg_id, dev_id);
+
+	/* read ONFI */
+	chip->onfi_version = 0;
+	chip->cmdfunc(mtd, NAND_CMD_READID, 0x20, -1);
+	if (chip->read_byte(mtd) != 'O' || chip->read_byte(mtd) != 'N' ||
+	    chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I') {
+		return -2;
+	}
+
+	/* we have ONFI, probe it */
+	chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
+	chip->read_buf(mtd, (uint8_t *)p, sizeof(*p));
+	mtd->name = p->model;
+	mtd->writesize = le32_to_cpu(p->byte_per_page);
+	mtd->erasesize = le32_to_cpu(p->pages_per_block) * mtd->writesize;
+	mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
+	chip->chipsize = le32_to_cpu(p->blocks_per_lun);
+	chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count;
+	/* Calculate the address shift from the page size */
+	chip->page_shift = ffs(mtd->writesize) - 1;
+	chip->phys_erase_shift = ffs(mtd->erasesize) - 1;
+	/* Convert chipsize to number of pages per chip -1 */
+	chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
+	chip->badblockbits = 8;
+
+	debug("erasesize=%d (>>%d)\n", mtd->erasesize, chip->phys_erase_shift);
+	debug("writesize=%d (>>%d)\n", mtd->writesize, chip->page_shift);
+	debug("oobsize=%d\n", mtd->oobsize);
+	debug("chipsize=%lld\n", chip->chipsize);
+
+	return 0;
+}
+
+static int mxs_read_page_ecc(struct mtd_info *mtd, void *buf, unsigned int page)
+{
+	register struct nand_chip *chip = mtd->priv;
+	int ret;
+
+	chip->cmdfunc(mtd, NAND_CMD_READ0, 0x0, page);
+	ret = nand_chip.ecc.read_page(mtd, chip, buf, 1, page);
+	if (ret < 0) {
+		printf("read_page failed %d\n", ret);
+		return -1;
+	}
+	return 0;
+}
+
+static int is_badblock(struct mtd_info *mtd, loff_t offs, int allowbbt)
+{
+	register struct nand_chip *chip = mtd->priv;
+	unsigned int block = offs >> chip->phys_erase_shift;
+	unsigned int page = offs >> chip->page_shift;
+
+	debug("%s offs=0x%08x block:%d page:%d\n", __func__, (int)offs, block,
+	      page);
+	chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
+	memset(chip->oob_poi, 0, mtd->oobsize);
+	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	return chip->oob_poi[0] != 0xff;
+}
+
+/* setup mtd and nand structs and init mxs_nand driver */
+static int mxs_nand_init(void)
+{
+	/* return if already initalized */
+	if (nand_chip.numchips)
+		return 0;
+
+	/* init mxs nand driver */
+	board_nand_init(&nand_chip);
+	mtd.priv = &nand_chip;
+	/* set mtd functions */
+	nand_chip.cmdfunc = mxs_nand_command;
+	nand_chip.numchips = 1;
+
+	/* identify flash device */
+	puts("NAND : ");
+	if (mxs_flash_ident(&mtd)) {
+		printf("Failed to identify\n");
+		return -1;
+	}
+
+	/* allocate and initialize buffers */
+	nand_chip.buffers = memalign(ARCH_DMA_MINALIGN,
+				     sizeof(*nand_chip.buffers));
+	nand_chip.oob_poi = nand_chip.buffers->databuf + mtd.writesize;
+	/* setup flash layout (does not scan as we override that) */
+	mtd.size = nand_chip.chipsize;
+	nand_chip.scan_bbt(&mtd);
+
+	printf("%llu MiB\n", (mtd.size / (1024 * 1024)));
+	return 0;
+}
+
+int nand_spl_load_image(uint32_t offs, unsigned int size, void *buf)
+{
+	struct nand_chip *chip;
+	unsigned int page;
+	unsigned int nand_page_per_block;
+	unsigned int sz = 0;
+
+	if (mxs_nand_init())
+		return -ENODEV;
+	chip = mtd.priv;
+	page = offs >> chip->page_shift;
+	nand_page_per_block = mtd.erasesize / mtd.writesize;
+
+	debug("%s offset:0x%08x len:%d page:%d\n", __func__, offs, size, page);
+
+	size = roundup(size, mtd.writesize);
+	while (sz < size) {
+		if (mxs_read_page_ecc(&mtd, buf, page) < 0)
+			return -1;
+		sz += mtd.writesize;
+		offs += mtd.writesize;
+		page++;
+		buf += mtd.writesize;
+
+		/*
+		 * Check if we have crossed a block boundary, and if so
+		 * check for bad block.
+		 */
+		if (!(page % nand_page_per_block)) {
+			/*
+			 * Yes, new block. See if this block is good. If not,
+			 * loop until we find a good block.
+			 */
+			while (is_badblock(&mtd, offs, 1)) {
+				page = page + nand_page_per_block;
+				/* Check i we've reached the end of flash. */
+				if (page >= mtd.size >> chip->page_shift)
+					return -ENOMEM;
+			}
+		}
+	}
+
+	return 0;
+}
+
+int nand_default_bbt(struct mtd_info *mtd)
+{
+	return 0;
+}
+
+void nand_init(void)
+{
+}
+
+void nand_deselect(void)
+{
+}
+
-- 
1.8.3.2



More information about the U-Boot mailing list