[U-Boot] [PATCH v2 10/12] net: Rename and cleanup sunxi (Allwinner) emac driver
Hans de Goede
hdegoede at redhat.com
Tue Jun 3 21:42:00 CEST 2014
From: Stefan Roese <sr at denx.de>
There have been 3 versions of the sunxi_emac support patch during its
development. Somehow version 2 ended up in upstream u-boot where as
the u-boot-sunxi git repo got version 3.
This bumps the version in upstream u-boot to version 3 of the patch:
- Initialize MII clock earlier so mii access to allow independent use
- Name change from WEMAC to EMAC to match mainline kernel & chip manual
- Cosmetic code cleanup
Signed-off-by: Stefan Roese <sr at denx.de>
Signed-off-by: Henrik Nordstrom <henrik at henriknordstrom.net>
Signed-off-by: Oliver Schinagl <oliver at schinagl.nl>
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
Acked-by: Ian Campbell <ijc at hellion.org.uk>
---
drivers/net/Makefile | 2 +-
drivers/net/sunxi_emac.c | 521 +++++++++++++++++++++++++++++++++++++++++++++
drivers/net/sunxi_wemac.c | 525 ----------------------------------------------
include/netdev.h | 2 +-
4 files changed, 523 insertions(+), 527 deletions(-)
create mode 100644 drivers/net/sunxi_emac.c
delete mode 100644 drivers/net/sunxi_wemac.c
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 6005f7e..da2b5f8 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_DNET) += dnet.o
obj-$(CONFIG_E1000) += e1000.o
obj-$(CONFIG_E1000_SPI) += e1000_spi.o
obj-$(CONFIG_EEPRO100) += eepro100.o
+obj-$(CONFIG_SUNXI_EMAC) += sunxi_emac.o
obj-$(CONFIG_ENC28J60) += enc28j60.o
obj-$(CONFIG_EP93XX) += ep93xx_eth.o
obj-$(CONFIG_ETHOC) += ethoc.o
@@ -51,7 +52,6 @@ obj-$(CONFIG_RTL8169) += rtl8169.o
obj-$(CONFIG_SH_ETHER) += sh_eth.o
obj-$(CONFIG_SMC91111) += smc91111.o
obj-$(CONFIG_SMC911X) += smc911x.o
-obj-$(CONFIG_SUNXI_WEMAC) += sunxi_wemac.o
obj-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o
obj-$(CONFIG_TSEC_ENET) += tsec.o fsl_mdio.o
obj-$(CONFIG_DRIVER_TI_CPSW) += cpsw.o
diff --git a/drivers/net/sunxi_emac.c b/drivers/net/sunxi_emac.c
new file mode 100644
index 0000000..5a06d68
--- /dev/null
+++ b/drivers/net/sunxi_emac.c
@@ -0,0 +1,521 @@
+/*
+ * sunxi_emac.c -- Allwinner A10 ethernet driver
+ *
+ * (C) Copyright 2012, Stefan Roese <sr at denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/err.h>
+#include <malloc.h>
+#include <miiphy.h>
+#include <net.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+
+/* EMAC register */
+struct emac_regs {
+ u32 ctl; /* 0x00 */
+ u32 tx_mode; /* 0x04 */
+ u32 tx_flow; /* 0x08 */
+ u32 tx_ctl0; /* 0x0c */
+ u32 tx_ctl1; /* 0x10 */
+ u32 tx_ins; /* 0x14 */
+ u32 tx_pl0; /* 0x18 */
+ u32 tx_pl1; /* 0x1c */
+ u32 tx_sta; /* 0x20 */
+ u32 tx_io_data; /* 0x24 */
+ u32 tx_io_data1;/* 0x28 */
+ u32 tx_tsvl0; /* 0x2c */
+ u32 tx_tsvh0; /* 0x30 */
+ u32 tx_tsvl1; /* 0x34 */
+ u32 tx_tsvh1; /* 0x38 */
+ u32 rx_ctl; /* 0x3c */
+ u32 rx_hash0; /* 0x40 */
+ u32 rx_hash1; /* 0x44 */
+ u32 rx_sta; /* 0x48 */
+ u32 rx_io_data; /* 0x4c */
+ u32 rx_fbc; /* 0x50 */
+ u32 int_ctl; /* 0x54 */
+ u32 int_sta; /* 0x58 */
+ u32 mac_ctl0; /* 0x5c */
+ u32 mac_ctl1; /* 0x60 */
+ u32 mac_ipgt; /* 0x64 */
+ u32 mac_ipgr; /* 0x68 */
+ u32 mac_clrt; /* 0x6c */
+ u32 mac_maxf; /* 0x70 */
+ u32 mac_supp; /* 0x74 */
+ u32 mac_test; /* 0x78 */
+ u32 mac_mcfg; /* 0x7c */
+ u32 mac_mcmd; /* 0x80 */
+ u32 mac_madr; /* 0x84 */
+ u32 mac_mwtd; /* 0x88 */
+ u32 mac_mrdd; /* 0x8c */
+ u32 mac_mind; /* 0x90 */
+ u32 mac_ssrr; /* 0x94 */
+ u32 mac_a0; /* 0x98 */
+ u32 mac_a1; /* 0x9c */
+};
+
+/* SRAMC register */
+struct sunxi_sramc_regs {
+ u32 ctrl0;
+ u32 ctrl1;
+};
+
+/* 0: Disable 1: Aborted frame enable(default) */
+#define EMAC_TX_AB_M (0x1 << 0)
+/* 0: CPU 1: DMA(default) */
+#define EMAC_TX_TM (0x1 << 1)
+
+#define EMAC_TX_SETUP (0)
+
+/* 0: DRQ asserted 1: DRQ automatically(default) */
+#define EMAC_RX_DRQ_MODE (0x1 << 1)
+/* 0: CPU 1: DMA(default) */
+#define EMAC_RX_TM (0x1 << 2)
+/* 0: Normal(default) 1: Pass all Frames */
+#define EMAC_RX_PA (0x1 << 4)
+/* 0: Normal(default) 1: Pass Control Frames */
+#define EMAC_RX_PCF (0x1 << 5)
+/* 0: Normal(default) 1: Pass Frames with CRC Error */
+#define EMAC_RX_PCRCE (0x1 << 6)
+/* 0: Normal(default) 1: Pass Frames with Length Error */
+#define EMAC_RX_PLE (0x1 << 7)
+/* 0: Normal 1: Pass Frames length out of range(default) */
+#define EMAC_RX_POR (0x1 << 8)
+/* 0: Not accept 1: Accept unicast Packets(default) */
+#define EMAC_RX_UCAD (0x1 << 16)
+/* 0: Normal(default) 1: DA Filtering */
+#define EMAC_RX_DAF (0x1 << 17)
+/* 0: Not accept 1: Accept multicast Packets(default) */
+#define EMAC_RX_MCO (0x1 << 20)
+/* 0: Disable(default) 1: Enable Hash filter */
+#define EMAC_RX_MHF (0x1 << 21)
+/* 0: Not accept 1: Accept Broadcast Packets(default) */
+#define EMAC_RX_BCO (0x1 << 22)
+/* 0: Disable(default) 1: Enable SA Filtering */
+#define EMAC_RX_SAF (0x1 << 24)
+/* 0: Normal(default) 1: Inverse Filtering */
+#define EMAC_RX_SAIF (0x1 << 25)
+
+#define EMAC_RX_SETUP (EMAC_RX_POR | EMAC_RX_UCAD | EMAC_RX_DAF | \
+ EMAC_RX_MCO | EMAC_RX_BCO)
+
+/* 0: Disable 1: Enable Receive Flow Control(default) */
+#define EMAC_MAC_CTL0_RFC (0x1 << 2)
+/* 0: Disable 1: Enable Transmit Flow Control(default) */
+#define EMAC_MAC_CTL0_TFC (0x1 << 3)
+
+#define EMAC_MAC_CTL0_SETUP (EMAC_MAC_CTL0_RFC | EMAC_MAC_CTL0_TFC)
+
+/* 0: Disable 1: Enable MAC Frame Length Checking(default) */
+#define EMAC_MAC_CTL1_FLC (0x1 << 1)
+/* 0: Disable(default) 1: Enable Huge Frame */
+#define EMAC_MAC_CTL1_HF (0x1 << 2)
+/* 0: Disable(default) 1: Enable MAC Delayed CRC */
+#define EMAC_MAC_CTL1_DCRC (0x1 << 3)
+/* 0: Disable 1: Enable MAC CRC(default) */
+#define EMAC_MAC_CTL1_CRC (0x1 << 4)
+/* 0: Disable 1: Enable MAC PAD Short frames(default) */
+#define EMAC_MAC_CTL1_PC (0x1 << 5)
+/* 0: Disable(default) 1: Enable MAC PAD Short frames and append CRC */
+#define EMAC_MAC_CTL1_VC (0x1 << 6)
+/* 0: Disable(default) 1: Enable MAC auto detect Short frames */
+#define EMAC_MAC_CTL1_ADP (0x1 << 7)
+/* 0: Disable(default) 1: Enable */
+#define EMAC_MAC_CTL1_PRE (0x1 << 8)
+/* 0: Disable(default) 1: Enable */
+#define EMAC_MAC_CTL1_LPE (0x1 << 9)
+/* 0: Disable(default) 1: Enable no back off */
+#define EMAC_MAC_CTL1_NB (0x1 << 12)
+/* 0: Disable(default) 1: Enable */
+#define EMAC_MAC_CTL1_BNB (0x1 << 13)
+/* 0: Disable(default) 1: Enable */
+#define EMAC_MAC_CTL1_ED (0x1 << 14)
+
+#define EMAC_MAC_CTL1_SETUP (EMAC_MAC_CTL1_FLC | EMAC_MAC_CTL1_CRC | \
+ EMAC_MAC_CTL1_PC)
+
+#define EMAC_MAC_IPGT 0x15
+
+#define EMAC_MAC_NBTB_IPG1 0xc
+#define EMAC_MAC_NBTB_IPG2 0x12
+
+#define EMAC_MAC_CW 0x37
+#define EMAC_MAC_RM 0xf
+
+#define EMAC_MAC_MFL 0x0600
+
+/* Receive status */
+#define EMAC_CRCERR (0x1 << 4)
+#define EMAC_LENERR (0x3 << 5)
+
+#define DMA_CPU_TRRESHOLD 2000
+
+struct emac_eth_dev {
+ u32 speed;
+ u32 duplex;
+ u32 phy_configured;
+ int link_printed;
+};
+
+struct emac_rxhdr {
+ s16 rx_len;
+ u16 rx_status;
+};
+
+static void emac_inblk_32bit(void *reg, void *data, int count)
+{
+ int cnt = (count + 3) >> 2;
+
+ if (cnt) {
+ u32 *buf = data;
+
+ do {
+ u32 x = readl(reg);
+ *buf++ = x;
+ } while (--cnt);
+ }
+}
+
+static void emac_outblk_32bit(void *reg, void *data, int count)
+{
+ int cnt = (count + 3) >> 2;
+
+ if (cnt) {
+ const u32 *buf = data;
+
+ do {
+ writel(*buf++, reg);
+ } while (--cnt);
+ }
+}
+
+/* Read a word from phyxcer */
+static int emac_phy_read(const char *devname, unsigned char addr,
+ unsigned char reg, unsigned short *value)
+{
+ struct eth_device *dev = eth_get_dev_by_name(devname);
+ struct emac_regs *regs = (struct emac_regs *)dev->iobase;
+
+ /* issue the phy address and reg */
+ writel(addr << 8 | reg, ®s->mac_madr);
+
+ /* pull up the phy io line */
+ writel(0x1, ®s->mac_mcmd);
+
+ /* Wait read complete */
+ mdelay(1);
+
+ /* push down the phy io line */
+ writel(0x0, ®s->mac_mcmd);
+
+ /* and write data */
+ *value = readl(®s->mac_mrdd);
+
+ return 0;
+}
+
+/* Write a word to phyxcer */
+static int emac_phy_write(const char *devname, unsigned char addr,
+ unsigned char reg, unsigned short value)
+{
+ struct eth_device *dev = eth_get_dev_by_name(devname);
+ struct emac_regs *regs = (struct emac_regs *)dev->iobase;
+
+ /* issue the phy address and reg */
+ writel(addr << 8 | reg, ®s->mac_madr);
+
+ /* pull up the phy io line */
+ writel(0x1, ®s->mac_mcmd);
+
+ /* Wait write complete */
+ mdelay(1);
+
+ /* push down the phy io line */
+ writel(0x0, ®s->mac_mcmd);
+
+ /* and write data */
+ writel(value, ®s->mac_mwtd);
+
+ return 0;
+}
+
+static void emac_setup(struct eth_device *dev)
+{
+ struct emac_regs *regs = (struct emac_regs *)dev->iobase;
+ u32 reg_val;
+ u16 phy_val;
+ u32 duplex_flag;
+
+ /* Set up TX */
+ writel(EMAC_TX_SETUP, ®s->tx_mode);
+
+ /* Set up RX */
+ writel(EMAC_RX_SETUP, ®s->rx_ctl);
+
+ /* Set MAC */
+ /* Set MAC CTL0 */
+ writel(EMAC_MAC_CTL0_SETUP, ®s->mac_ctl0);
+
+ /* Set MAC CTL1 */
+ emac_phy_read(dev->name, 1, 0, &phy_val);
+ debug("PHY SETUP, reg 0 value: %x\n", phy_val);
+ duplex_flag = !!(phy_val & (1 << 8));
+
+ reg_val = 0;
+ if (duplex_flag)
+ reg_val = (0x1 << 0);
+ writel(EMAC_MAC_CTL1_SETUP | reg_val, ®s->mac_ctl1);
+
+ /* Set up IPGT */
+ writel(EMAC_MAC_IPGT, ®s->mac_ipgt);
+
+ /* Set up IPGR */
+ writel(EMAC_MAC_NBTB_IPG2 | (EMAC_MAC_NBTB_IPG1 << 8), ®s->mac_ipgr);
+
+ /* Set up Collison window */
+ writel(EMAC_MAC_RM | (EMAC_MAC_CW << 8), ®s->mac_clrt);
+
+ /* Set up Max Frame Length */
+ writel(EMAC_MAC_MFL, ®s->mac_maxf);
+}
+
+static void emac_reset(struct eth_device *dev)
+{
+ struct emac_regs *regs = (struct emac_regs *)dev->iobase;
+
+ debug("resetting device\n");
+
+ /* RESET device */
+ writel(0, ®s->ctl);
+ udelay(200);
+
+ writel(1, ®s->ctl);
+ udelay(200);
+}
+
+static int sunxi_emac_eth_init(struct eth_device *dev, bd_t *bd)
+{
+ struct emac_regs *regs = (struct emac_regs *)dev->iobase;
+ struct emac_eth_dev *priv = dev->priv;
+ u16 phy_reg;
+
+ /* Init EMAC */
+
+ /* Flush RX FIFO */
+ setbits_le32(®s->rx_ctl, 0x8);
+ udelay(1);
+
+ /* Init MAC */
+
+ /* Soft reset MAC */
+ clrbits_le32(®s->mac_ctl0, 0x1 << 15);
+
+ /* Clear RX counter */
+ writel(0x0, ®s->rx_fbc);
+ udelay(1);
+
+ /* Set up EMAC */
+ emac_setup(dev);
+
+ writel(dev->enetaddr[0] << 16 | dev->enetaddr[1] << 8 |
+ dev->enetaddr[2], ®s->mac_a1);
+ writel(dev->enetaddr[3] << 16 | dev->enetaddr[4] << 8 |
+ dev->enetaddr[5], ®s->mac_a0);
+
+ mdelay(1);
+
+ emac_reset(dev);
+
+ /* PHY POWER UP */
+ emac_phy_read(dev->name, 1, 0, &phy_reg);
+ emac_phy_write(dev->name, 1, 0, phy_reg & (~(0x1 << 11)));
+ mdelay(1);
+
+ emac_phy_read(dev->name, 1, 0, &phy_reg);
+
+ priv->speed = miiphy_speed(dev->name, 0);
+ priv->duplex = miiphy_duplex(dev->name, 0);
+
+ /* Print link status only once */
+ if (!priv->link_printed) {
+ printf("ENET Speed is %d Mbps - %s duplex connection\n",
+ priv->speed, (priv->duplex == HALF) ? "HALF" : "FULL");
+ priv->link_printed = 1;
+ }
+
+ /* Set EMAC SPEED depend on PHY */
+ clrsetbits_le32(®s->mac_supp, 1 << 8,
+ ((phy_reg & (0x1 << 13)) >> 13) << 8);
+
+ /* Set duplex depend on phy */
+ clrsetbits_le32(®s->mac_ctl1, 1 << 0,
+ ((phy_reg & (0x1 << 8)) >> 8) << 0);
+
+ /* Enable RX/TX */
+ setbits_le32(®s->ctl, 0x7);
+
+ return 0;
+}
+
+static void sunxi_emac_eth_halt(struct eth_device *dev)
+{
+ /* Nothing to do here */
+}
+
+static int sunxi_emac_eth_recv(struct eth_device *dev)
+{
+ struct emac_regs *regs = (struct emac_regs *)dev->iobase;
+ struct emac_rxhdr rxhdr;
+ u32 rxcount;
+ u32 reg_val;
+ int rx_len;
+ int rx_status;
+ int good_packet;
+
+ /* Check packet ready or not */
+
+ /* Race warning: The first packet might arrive with
+ * the interrupts disabled, but the second will fix
+ */
+ rxcount = readl(®s->rx_fbc);
+ if (!rxcount) {
+ /* Had one stuck? */
+ rxcount = readl(®s->rx_fbc);
+ if (!rxcount)
+ return 0;
+ }
+
+ reg_val = readl(®s->rx_io_data);
+ if (reg_val != 0x0143414d) {
+ /* Disable RX */
+ clrbits_le32(®s->ctl, 0x1 << 2);
+
+ /* Flush RX FIFO */
+ setbits_le32(®s->rx_ctl, 0x1 << 3);
+ while (readl(®s->rx_ctl) & (0x1 << 3))
+ ;
+
+ /* Enable RX */
+ setbits_le32(®s->ctl, 0x1 << 2);
+
+ return 0;
+ }
+
+ /* A packet ready now
+ * Get status/length
+ */
+ good_packet = 1;
+
+ emac_inblk_32bit(®s->rx_io_data, &rxhdr, sizeof(rxhdr));
+
+ rx_len = rxhdr.rx_len;
+ rx_status = rxhdr.rx_status;
+
+ /* Packet Status check */
+ if (rx_len < 0x40) {
+ good_packet = 0;
+ debug("RX: Bad Packet (runt)\n");
+ }
+
+ /* rx_status is identical to RSR register. */
+ if (0 & rx_status & (EMAC_CRCERR | EMAC_LENERR)) {
+ good_packet = 0;
+ if (rx_status & EMAC_CRCERR)
+ printf("crc error\n");
+ if (rx_status & EMAC_LENERR)
+ printf("length error\n");
+ }
+
+ /* Move data from EMAC */
+ if (good_packet) {
+ if (rx_len > DMA_CPU_TRRESHOLD) {
+ printf("Received packet is too big (len=%d)\n", rx_len);
+ } else {
+ emac_inblk_32bit((void *)®s->rx_io_data,
+ NetRxPackets[0], rx_len);
+
+ /* Pass to upper layer */
+ NetReceive(NetRxPackets[0], rx_len);
+ return rx_len;
+ }
+ }
+
+ return 0;
+}
+
+static int sunxi_emac_eth_send(struct eth_device *dev, void *packet, int len)
+{
+ struct emac_regs *regs = (struct emac_regs *)dev->iobase;
+
+ /* Select channel 0 */
+ writel(0, ®s->tx_ins);
+
+ /* Write packet */
+ emac_outblk_32bit((void *)®s->tx_io_data, packet, len);
+
+ /* Set TX len */
+ writel(len, ®s->tx_pl0);
+
+ /* Start translate from fifo to phy */
+ setbits_le32(®s->tx_ctl0, 1);
+
+ return 0;
+}
+
+int sunxi_emac_initialize(void)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ struct sunxi_sramc_regs *sram =
+ (struct sunxi_sramc_regs *)SUNXI_SRAMC_BASE;
+ struct emac_regs *regs =
+ (struct emac_regs *)SUNXI_EMAC_BASE;
+ struct eth_device *dev;
+ struct emac_eth_dev *priv;
+ int pin;
+
+ dev = malloc(sizeof(*dev));
+ if (dev == NULL)
+ return -ENOMEM;
+
+ priv = (struct emac_eth_dev *)malloc(sizeof(struct emac_eth_dev));
+ if (!priv) {
+ free(dev);
+ return -ENOMEM;
+ }
+
+ memset(dev, 0, sizeof(*dev));
+ memset(priv, 0, sizeof(struct emac_eth_dev));
+
+ /* Map SRAM to EMAC */
+ setbits_le32(&sram->ctrl1, 0x5 << 2);
+
+ /* Configure pin mux settings for MII Ethernet */
+ for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(17); pin++)
+ sunxi_gpio_set_cfgpin(pin, SUNXI_GPA0_EMAC);
+
+ /* Set up clock gating */
+ setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_EMAC);
+
+ /* Set MII clock */
+ clrsetbits_le32(®s->mac_mcfg, 0xf << 2, 0xd << 2);
+
+ dev->iobase = (int)regs;
+ dev->priv = priv;
+ dev->init = sunxi_emac_eth_init;
+ dev->halt = sunxi_emac_eth_halt;
+ dev->send = sunxi_emac_eth_send;
+ dev->recv = sunxi_emac_eth_recv;
+ strcpy(dev->name, "emac");
+
+ eth_register(dev);
+
+ miiphy_register(dev->name, emac_phy_read, emac_phy_write);
+
+ return 0;
+}
diff --git a/drivers/net/sunxi_wemac.c b/drivers/net/sunxi_wemac.c
deleted file mode 100644
index 699a381..0000000
--- a/drivers/net/sunxi_wemac.c
+++ /dev/null
@@ -1,525 +0,0 @@
-/*
- * sunxi_wemac.c -- Allwinner A10 ethernet driver
- *
- * (C) Copyright 2012, Stefan Roese <sr at denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <net.h>
-#include <miiphy.h>
-#include <linux/err.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-
-/* EMAC register */
-struct wemac_regs {
- u32 ctl; /* 0x00 */
- u32 tx_mode; /* 0x04 */
- u32 tx_flow; /* 0x08 */
- u32 tx_ctl0; /* 0x0c */
- u32 tx_ctl1; /* 0x10 */
- u32 tx_ins; /* 0x14 */
- u32 tx_pl0; /* 0x18 */
- u32 tx_pl1; /* 0x1c */
- u32 tx_sta; /* 0x20 */
- u32 tx_io_data; /* 0x24 */
- u32 tx_io_data1; /* 0x28 */
- u32 tx_tsvl0; /* 0x2c */
- u32 tx_tsvh0; /* 0x30 */
- u32 tx_tsvl1; /* 0x34 */
- u32 tx_tsvh1; /* 0x38 */
- u32 rx_ctl; /* 0x3c */
- u32 rx_hash0; /* 0x40 */
- u32 rx_hash1; /* 0x44 */
- u32 rx_sta; /* 0x48 */
- u32 rx_io_data; /* 0x4c */
- u32 rx_fbc; /* 0x50 */
- u32 int_ctl; /* 0x54 */
- u32 int_sta; /* 0x58 */
- u32 mac_ctl0; /* 0x5c */
- u32 mac_ctl1; /* 0x60 */
- u32 mac_ipgt; /* 0x64 */
- u32 mac_ipgr; /* 0x68 */
- u32 mac_clrt; /* 0x6c */
- u32 mac_maxf; /* 0x70 */
- u32 mac_supp; /* 0x74 */
- u32 mac_test; /* 0x78 */
- u32 mac_mcfg; /* 0x7c */
- u32 mac_mcmd; /* 0x80 */
- u32 mac_madr; /* 0x84 */
- u32 mac_mwtd; /* 0x88 */
- u32 mac_mrdd; /* 0x8c */
- u32 mac_mind; /* 0x90 */
- u32 mac_ssrr; /* 0x94 */
- u32 mac_a0; /* 0x98 */
- u32 mac_a1; /* 0x9c */
-};
-
-/* SRAMC register */
-struct sunxi_sramc_regs {
- u32 ctrl0;
- u32 ctrl1;
-};
-
-/* 0: Disable 1: Aborted frame enable(default) */
-#define EMAC_TX_AB_M (0x1 << 0)
-/* 0: CPU 1: DMA(default) */
-#define EMAC_TX_TM (0x1 << 1)
-
-#define EMAC_TX_SETUP (0)
-
-/* 0: DRQ asserted 1: DRQ automatically(default) */
-#define EMAC_RX_DRQ_MODE (0x1 << 1)
-/* 0: CPU 1: DMA(default) */
-#define EMAC_RX_TM (0x1 << 2)
-/* 0: Normal(default) 1: Pass all Frames */
-#define EMAC_RX_PA (0x1 << 4)
-/* 0: Normal(default) 1: Pass Control Frames */
-#define EMAC_RX_PCF (0x1 << 5)
-/* 0: Normal(default) 1: Pass Frames with CRC Error */
-#define EMAC_RX_PCRCE (0x1 << 6)
-/* 0: Normal(default) 1: Pass Frames with Length Error */
-#define EMAC_RX_PLE (0x1 << 7)
-/* 0: Normal 1: Pass Frames length out of range(default) */
-#define EMAC_RX_POR (0x1 << 8)
-/* 0: Not accept 1: Accept unicast Packets(default) */
-#define EMAC_RX_UCAD (0x1 << 16)
-/* 0: Normal(default) 1: DA Filtering */
-#define EMAC_RX_DAF (0x1 << 17)
-/* 0: Not accept 1: Accept multicast Packets(default) */
-#define EMAC_RX_MCO (0x1 << 20)
-/* 0: Disable(default) 1: Enable Hash filter */
-#define EMAC_RX_MHF (0x1 << 21)
-/* 0: Not accept 1: Accept Broadcast Packets(default) */
-#define EMAC_RX_BCO (0x1 << 22)
-/* 0: Disable(default) 1: Enable SA Filtering */
-#define EMAC_RX_SAF (0x1 << 24)
-/* 0: Normal(default) 1: Inverse Filtering */
-#define EMAC_RX_SAIF (0x1 << 25)
-
-#define EMAC_RX_SETUP (EMAC_RX_POR | EMAC_RX_UCAD | EMAC_RX_DAF | \
- EMAC_RX_MCO | EMAC_RX_BCO)
-
-/* 0: Disable 1: Enable Receive Flow Control(default) */
-#define EMAC_MAC_CTL0_RFC (0x1 << 2)
-/* 0: Disable 1: Enable Transmit Flow Control(default) */
-#define EMAC_MAC_CTL0_TFC (0x1 << 3)
-
-#define EMAC_MAC_CTL0_SETUP (EMAC_MAC_CTL0_RFC | EMAC_MAC_CTL0_TFC)
-
-/* 0: Disable 1: Enable MAC Frame Length Checking(default) */
-#define EMAC_MAC_CTL1_FLC (0x1 << 1)
-/* 0: Disable(default) 1: Enable Huge Frame */
-#define EMAC_MAC_CTL1_HF (0x1 << 2)
-/* 0: Disable(default) 1: Enable MAC Delayed CRC */
-#define EMAC_MAC_CTL1_DCRC (0x1 << 3)
-/* 0: Disable 1: Enable MAC CRC(default) */
-#define EMAC_MAC_CTL1_CRC (0x1 << 4)
-/* 0: Disable 1: Enable MAC PAD Short frames(default) */
-#define EMAC_MAC_CTL1_PC (0x1 << 5)
-/* 0: Disable(default) 1: Enable MAC PAD Short frames and append CRC */
-#define EMAC_MAC_CTL1_VC (0x1 << 6)
-/* 0: Disable(default) 1: Enable MAC auto detect Short frames */
-#define EMAC_MAC_CTL1_ADP (0x1 << 7)
-/* 0: Disable(default) 1: Enable */
-#define EMAC_MAC_CTL1_PRE (0x1 << 8)
-/* 0: Disable(default) 1: Enable */
-#define EMAC_MAC_CTL1_LPE (0x1 << 9)
-/* 0: Disable(default) 1: Enable no back off */
-#define EMAC_MAC_CTL1_NB (0x1 << 12)
-/* 0: Disable(default) 1: Enable */
-#define EMAC_MAC_CTL1_BNB (0x1 << 13)
-/* 0: Disable(default) 1: Enable */
-#define EMAC_MAC_CTL1_ED (0x1 << 14)
-
-#define EMAC_MAC_CTL1_SETUP (EMAC_MAC_CTL1_FLC | EMAC_MAC_CTL1_CRC | \
- EMAC_MAC_CTL1_PC)
-
-#define EMAC_MAC_IPGT 0x15
-
-#define EMAC_MAC_NBTB_IPG1 0xC
-#define EMAC_MAC_NBTB_IPG2 0x12
-
-#define EMAC_MAC_CW 0x37
-#define EMAC_MAC_RM 0xF
-
-#define EMAC_MAC_MFL 0x0600
-
-/* Receive status */
-#define EMAC_CRCERR (1 << 4)
-#define EMAC_LENERR (3 << 5)
-
-#define DMA_CPU_TRRESHOLD 2000
-
-struct wemac_eth_dev {
- u32 speed;
- u32 duplex;
- u32 phy_configured;
- int link_printed;
-};
-
-struct wemac_rxhdr {
- s16 rx_len;
- u16 rx_status;
-};
-
-static void wemac_inblk_32bit(void *reg, void *data, int count)
-{
- int cnt = (count + 3) >> 2;
-
- if (cnt) {
- u32 *buf = data;
-
- do {
- u32 x = readl(reg);
- *buf++ = x;
- } while (--cnt);
- }
-}
-
-static void wemac_outblk_32bit(void *reg, void *data, int count)
-{
- int cnt = (count + 3) >> 2;
-
- if (cnt) {
- const u32 *buf = data;
-
- do {
- writel(*buf++, reg);
- } while (--cnt);
- }
-}
-
-/*
- * Read a word from phyxcer
- */
-static int wemac_phy_read(const char *devname, unsigned char addr,
- unsigned char reg, unsigned short *value)
-{
- struct eth_device *dev = eth_get_dev_by_name(devname);
- struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
-
- /* issue the phy address and reg */
- writel(addr << 8 | reg, ®s->mac_madr);
-
- /* pull up the phy io line */
- writel(0x1, ®s->mac_mcmd);
-
- /* Wait read complete */
- mdelay(1);
-
- /* push down the phy io line */
- writel(0x0, ®s->mac_mcmd);
-
- /* and write data */
- *value = readl(®s->mac_mrdd);
-
- return 0;
-}
-
-/*
- * Write a word to phyxcer
- */
-static int wemac_phy_write(const char *devname, unsigned char addr,
- unsigned char reg, unsigned short value)
-{
- struct eth_device *dev = eth_get_dev_by_name(devname);
- struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
-
- /* issue the phy address and reg */
- writel(addr << 8 | reg, ®s->mac_madr);
-
- /* pull up the phy io line */
- writel(0x1, ®s->mac_mcmd);
-
- /* Wait write complete */
- mdelay(1);
-
- /* push down the phy io line */
- writel(0x0, ®s->mac_mcmd);
-
- /* and write data */
- writel(value, ®s->mac_mwtd);
-
- return 0;
-}
-
-static void emac_setup(struct eth_device *dev)
-{
- struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
- u32 reg_val;
- u16 phy_val;
- u32 duplex_flag;
-
- /* Set up TX */
- writel(EMAC_TX_SETUP, ®s->tx_mode);
-
- /* Set up RX */
- writel(EMAC_RX_SETUP, ®s->rx_ctl);
-
- /* Set MAC */
- /* Set MAC CTL0 */
- writel(EMAC_MAC_CTL0_SETUP, ®s->mac_ctl0);
-
- /* Set MAC CTL1 */
- wemac_phy_read(dev->name, 1, 0, &phy_val);
- debug("PHY SETUP, reg 0 value: %x\n", phy_val);
- duplex_flag = !!(phy_val & (1 << 8));
-
- reg_val = 0;
- if (duplex_flag)
- reg_val = (0x1 << 0);
- writel(EMAC_MAC_CTL1_SETUP | reg_val, ®s->mac_ctl1);
-
- /* Set up IPGT */
- writel(EMAC_MAC_IPGT, ®s->mac_ipgt);
-
- /* Set up IPGR */
- writel(EMAC_MAC_NBTB_IPG2 | (EMAC_MAC_NBTB_IPG1 << 8), ®s->mac_ipgr);
-
- /* Set up Collison window */
- writel(EMAC_MAC_RM | (EMAC_MAC_CW << 8), ®s->mac_clrt);
-
- /* Set up Max Frame Length */
- writel(EMAC_MAC_MFL, ®s->mac_maxf);
-}
-
-static void wemac_reset(struct eth_device *dev)
-{
- struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
-
- debug("resetting device\n");
-
- /* RESET device */
- writel(0, ®s->ctl);
- udelay(200);
-
- writel(1, ®s->ctl);
- udelay(200);
-}
-
-static int sunxi_wemac_eth_init(struct eth_device *dev, bd_t *bd)
-{
- struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
- struct wemac_eth_dev *priv = dev->priv;
- u16 phy_reg;
-
- /* Init EMAC */
-
- /* Flush RX FIFO */
- setbits_le32(®s->rx_ctl, 0x8);
- udelay(1);
-
- /* Init MAC */
-
- /* Soft reset MAC */
- clrbits_le32(®s->mac_ctl0, 1 << 15);
-
- /* Set MII clock */
- clrsetbits_le32(®s->mac_mcfg, 0xf << 2, 0xd << 2);
-
- /* Clear RX counter */
- writel(0x0, ®s->rx_fbc);
- udelay(1);
-
- /* Set up EMAC */
- emac_setup(dev);
-
- writel(dev->enetaddr[0] << 16 | dev->enetaddr[1] << 8 |
- dev->enetaddr[2], ®s->mac_a1);
- writel(dev->enetaddr[3] << 16 | dev->enetaddr[4] << 8 |
- dev->enetaddr[5], ®s->mac_a0);
-
- mdelay(1);
-
- wemac_reset(dev);
-
- /* PHY POWER UP */
- wemac_phy_read(dev->name, 1, 0, &phy_reg);
- wemac_phy_write(dev->name, 1, 0, phy_reg & (~(1 << 11)));
- mdelay(1);
-
- wemac_phy_read(dev->name, 1, 0, &phy_reg);
-
- priv->speed = miiphy_speed(dev->name, 0);
- priv->duplex = miiphy_duplex(dev->name, 0);
-
- /* Print link status only once */
- if (!priv->link_printed) {
- printf("ENET Speed is %d Mbps - %s duplex connection\n",
- priv->speed, (priv->duplex == HALF) ? "HALF" : "FULL");
- priv->link_printed = 1;
- }
-
- /* Set EMAC SPEED depend on PHY */
- clrsetbits_le32(®s->mac_supp, 1 << 8,
- ((phy_reg & (1 << 13)) >> 13) << 8);
-
- /* Set duplex depend on phy */
- clrsetbits_le32(®s->mac_ctl1, 1 << 0,
- ((phy_reg & (1 << 8)) >> 8) << 0);
-
- /* Enable RX/TX */
- setbits_le32(®s->ctl, 0x7);
-
- return 0;
-}
-
-static void sunxi_wemac_eth_halt(struct eth_device *dev)
-{
- /* Nothing to do here */
-}
-
-static int sunxi_wemac_eth_recv(struct eth_device *dev)
-{
- struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
- struct wemac_rxhdr rxhdr;
- u32 rxcount;
- u32 reg_val;
- int rx_len;
- int rx_status;
- int good_packet;
-
- /* Check packet ready or not */
-
- /*
- * Race warning: The first packet might arrive with
- * the interrupts disabled, but the second will fix
- */
- rxcount = readl(®s->rx_fbc);
- if (!rxcount) {
- /* Had one stuck? */
- rxcount = readl(®s->rx_fbc);
- if (!rxcount)
- return 0;
- }
-
- reg_val = readl(®s->rx_io_data);
- if (reg_val != 0x0143414d) {
- /* Disable RX */
- clrbits_le32(®s->ctl, 1 << 2);
-
- /* Flush RX FIFO */
- setbits_le32(®s->rx_ctl, 1 << 3);
- while (readl(®s->rx_ctl) & (1 << 3))
- ;
-
- /* Enable RX */
- setbits_le32(®s->ctl, 1 << 2);
-
- return 0;
- }
-
- /*
- * A packet ready now
- * Get status/length
- */
- good_packet = 1;
-
- wemac_inblk_32bit(®s->rx_io_data, &rxhdr, sizeof(rxhdr));
-
- rx_len = rxhdr.rx_len;
- rx_status = rxhdr.rx_status;
-
- /* Packet Status check */
- if (rx_len < 0x40) {
- good_packet = 0;
- debug("RX: Bad Packet (runt)\n");
- }
-
- /* rx_status is identical to RSR register. */
- if (0 & rx_status & (EMAC_CRCERR | EMAC_LENERR)) {
- good_packet = 0;
- if (rx_status & EMAC_CRCERR)
- printf("crc error\n");
- if (rx_status & EMAC_LENERR)
- printf("length error\n");
- }
-
- /* Move data from WEMAC */
- if (good_packet) {
- if (rx_len > DMA_CPU_TRRESHOLD) {
- printf("Received packet is too big (len=%d)\n", rx_len);
- } else {
- wemac_inblk_32bit((void *)®s->rx_io_data,
- NetRxPackets[0], rx_len);
-
- /* Pass to upper layer */
- NetReceive(NetRxPackets[0], rx_len);
- return rx_len;
- }
- }
-
- return 0;
-}
-
-static int sunxi_wemac_eth_send(struct eth_device *dev, void *packet, int len)
-{
- struct wemac_regs *regs = (struct wemac_regs *)dev->iobase;
-
- /* Select channel 0 */
- writel(0, ®s->tx_ins);
-
- /* Write packet */
- wemac_outblk_32bit((void *)®s->tx_io_data, packet, len);
-
- /* Set TX len */
- writel(len, ®s->tx_pl0);
-
- /* Start translate from fifo to phy */
- setbits_le32(®s->tx_ctl0, 1);
-
- return 0;
-}
-
-int sunxi_wemac_initialize(void)
-{
- struct sunxi_ccm_reg *const ccm =
- (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- struct sunxi_sramc_regs *sram =
- (struct sunxi_sramc_regs *)SUNXI_SRAMC_BASE;
- struct eth_device *dev;
- struct wemac_eth_dev *priv;
- int pin;
-
- dev = malloc(sizeof(*dev));
- if (dev == NULL)
- return -ENOMEM;
-
- priv = (struct wemac_eth_dev *)malloc(sizeof(struct wemac_eth_dev));
- if (!priv) {
- free(dev);
- return -ENOMEM;
- }
-
- memset(dev, 0, sizeof(*dev));
- memset(priv, 0, sizeof(struct wemac_eth_dev));
-
- /* Map SRAM to EMAC */
- setbits_le32(&sram->ctrl1, 0x5 << 2);
-
- /* Configure pin mux settings for MII Ethernet */
- for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(17); pin++)
- sunxi_gpio_set_cfgpin(pin, 2);
-
- /* Set up clock gating */
- setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_EMAC);
-
- dev->iobase = SUNXI_EMAC_BASE;
- dev->priv = priv;
- dev->init = sunxi_wemac_eth_init;
- dev->halt = sunxi_wemac_eth_halt;
- dev->send = sunxi_wemac_eth_send;
- dev->recv = sunxi_wemac_eth_recv;
- strcpy(dev->name, "wemac");
-
- eth_register(dev);
-
- miiphy_register(dev->name, wemac_phy_read, wemac_phy_write);
-
- return 0;
-}
diff --git a/include/netdev.h b/include/netdev.h
index 63481ec..e45dd7a 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -78,8 +78,8 @@ int sh_eth_initialize(bd_t *bis);
int skge_initialize(bd_t *bis);
int smc91111_initialize(u8 dev_num, int base_addr);
int smc911x_initialize(u8 dev_num, int base_addr);
+int sunxi_emac_initialize(bd_t *bis);
int sunxi_gmac_initialize(bd_t *bis);
-int sunxi_wemac_initialize(bd_t *bis);
int tsi108_eth_initialize(bd_t *bis);
int uec_standard_init(bd_t *bis);
int uli526x_initialize(bd_t *bis);
--
1.9.0
More information about the U-Boot
mailing list