[U-Boot] [PATCH] board/BuR/tseries: Add support for using 8-bit on eMMC

Hannes Petermaier oe5hpm at oevsv.at
Wed Jun 4 10:25:32 CEST 2014


Cc: trini at ti.com
Signed-off-by: Hannes Petermaier <oe5hpm at oevsv.at>
---
 board/BuR/tseries/mux.c |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/board/BuR/tseries/mux.c b/board/BuR/tseries/mux.c
index af09bd6..210ac71 100644
--- a/board/BuR/tseries/mux.c
+++ b/board/BuR/tseries/mux.c
@@ -27,6 +27,11 @@ static struct module_pin_mux uart0_pin_mux[] = {
 };
 #ifdef CONFIG_MMC
 static struct module_pin_mux mmc1_pin_mux[] = {
+	{OFFSET(gpmc_ad7), (MODE(1) | RXACTIVE | PULLUP_EN)},	/* MMC1_DAT7 */
+	{OFFSET(gpmc_ad6), (MODE(1) | RXACTIVE | PULLUP_EN)},	/* MMC1_DAT6 */
+	{OFFSET(gpmc_ad5), (MODE(1) | RXACTIVE | PULLUP_EN)},	/* MMC1_DAT5 */
+	{OFFSET(gpmc_ad4), (MODE(1) | RXACTIVE | PULLUP_EN)},	/* MMC1_DAT4 */
+
 	{OFFSET(gpmc_ad3), (MODE(1) | RXACTIVE | PULLUP_EN)},	/* MMC1_DAT3 */
 	{OFFSET(gpmc_ad2), (MODE(1) | RXACTIVE | PULLUP_EN)},	/* MMC1_DAT2 */
 	{OFFSET(gpmc_ad1), (MODE(1) | RXACTIVE | PULLUP_EN)},	/* MMC1_DAT1 */
-- 
1.7.9.5



More information about the U-Boot mailing list