[U-Boot] [PATCH 1/3] blackfin: spi: move spi max chip select to spi.h

[Scott Jiang]

Signed-off-by: Scott Jiang <scott.jiang.linux at gmail.com>
---
 arch/blackfin/include/asm/config-pre.h           |    3 ---
 arch/blackfin/include/asm/mach-common/bits/spi.h |    1 +
 2 files changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/blackfin/include/asm/config-pre.h b/arch/blackfin/include/asm/config-pre.h
index d0fd537..0ffa44c 100644
--- a/arch/blackfin/include/asm/config-pre.h
+++ b/arch/blackfin/include/asm/config-pre.h
@@ -73,9 +73,6 @@ static inline const char *get_bfin_boot_mode(int bfin_boot)
 # define BFIN_BOOT_SPI_SSEL 1
 #endif
 
-/* Define to get a GPIO CS with the Blackfin SPI controller */
-#define MAX_CTRL_CS 8
-
 /* There is no Blackfin/NetBSD port */
 #undef CONFIG_BOOTM_NETBSD
 
diff --git a/arch/blackfin/include/asm/mach-common/bits/spi.h b/arch/blackfin/include/asm/mach-common/bits/spi.h
index 869dcb0..180cfaa 100644
--- a/arch/blackfin/include/asm/mach-common/bits/spi.h
+++ b/arch/blackfin/include/asm/mach-common/bits/spi.h
@@ -64,4 +64,5 @@
 #define RXS			0x0020	/* SPI_RDBR Data Buffer Status (Full/Empty*) */
 #define TXCOL			0x0040	/* Transmit Collision Error (Corrupt Data May Have Been Sent) */
 
+#define MAX_CTRL_CS             7
 #endif
-- 
1.7.9.5