[U-Boot] [PATCH v3 08/10] sunxi: Add emac glue, enable emac on the cubieboard
Hans de Goede
hdegoede at redhat.com
Mon Jun 9 11:37:00 CEST 2014
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
Acked-by: Ian Campbell <ijc at hellion.org.uk>
---
arch/arm/cpu/armv7/sunxi/board.c | 8 ++++++++
boards.cfg | 2 +-
include/configs/sunxi-common.h | 5 +++++
3 files changed, 14 insertions(+), 1 deletion(-)
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
index 0118f5b..1e506b5 100644
--- a/arch/arm/cpu/armv7/sunxi/board.c
+++ b/arch/arm/cpu/armv7/sunxi/board.c
@@ -117,6 +117,14 @@ int cpu_eth_init(bd_t *bis)
{
int rc;
+#ifdef CONFIG_SUNXI_EMAC
+ rc = sunxi_emac_initialize(bis);
+ if (rc < 0) {
+ printf("sunxi: failed to initialize emac\n");
+ return rc;
+ }
+#endif
+
#ifdef CONFIG_SUNXI_GMAC
rc = sunxi_gmac_initialize(bis);
if (rc < 0) {
diff --git a/boards.cfg b/boards.cfg
index bbe2b04..1fe9f80 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -375,7 +375,7 @@ Active arm armv7 s5pc1xx samsung goni
Active arm armv7 s5pc1xx samsung smdkc100 smdkc100 - Minkyu Kang <mk7.kang at samsung.com>
Active arm armv7 socfpga altera socfpga socfpga_cyclone5 - -
Active arm armv7 sunxi - sunxi A13-OLinuXinoM sun5i:A13_OLINUXINOM,SPL,CONS_INDEX=2 Hans de Goede <hdegoede at redhat.com>
-Active arm armv7 sunxi - sunxi Cubieboard sun4i:CUBIEBOARD,SPL Hans de Goede <hdegoede at redhat.com>
+Active arm armv7 sunxi - sunxi Cubieboard sun4i:CUBIEBOARD,SPL,SUNXI_EMAC Hans de Goede <hdegoede at redhat.com>
Active arm armv7 sunxi - sunxi Cubietruck sun7i:CUBIETRUCK,SPL,SUNXI_GMAC,RGMII -
Active arm armv7 sunxi - sunxi Cubietruck_FEL sun7i:CUBIETRUCK,SPL_FEL,SUNXI_GMAC,RGMII -
Active arm armv7 sunxi - sunxi r7-tv-dongle sun5i:R7DONGLE,SPL Hans de Goede <hdegoede at redhat.com>
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 1d1c87d..3f04890 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -165,6 +165,11 @@
#define CONFIG_CONS_INDEX 1 /* UART0 */
#endif
+/* Ethernet support */
+#ifdef CONFIG_SUNXI_EMAC
+#define CONFIG_MII /* MII PHY management */
+#endif
+
#ifdef CONFIG_SUNXI_GMAC
#define CONFIG_DESIGNWARE_ETH /* GMAC can use designware driver */
#define CONFIG_DW_AUTONEG
--
2.0.0
More information about the U-Boot
mailing list