[U-Boot] [PATCH 4/5] board: ti: am43xx: add AM437x SK PHY Address

[Vaibhav Bedia]

Hi Felipe,

On Jun 10, 2014 11:45 AM, "Felipe Balbi" <balbi at ti.com> wrote:
>
> pass correct PHY Address when running on SK
> so that we have working ethernet with this board
> too.
>
> Signed-off-by: Felipe Balbi <balbi at ti.com>
> ---
>  board/ti/am43xx/board.c | 21 +++++++++++++--------
>  1 file changed, 13 insertions(+), 8 deletions(-)
>
> diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
> index b184c20..054a452 100644
> --- a/board/ti/am43xx/board.c
> +++ b/board/ti/am43xx/board.c
> @@ -227,16 +227,16 @@ static const struct emif_regs
ddr3_sk_emif_regs_400Mhz = {
>         .read_idle_ctrl                 = 0x00050000,
>         .zq_config                      = 0x50074be4,
>         .temp_alert_config              = 0x0,
> -       .emif_ddr_phy_ctlr_1            = 0x0e084007,
> +       .emif_ddr_phy_ctlr_1            = 0x0e084008,
>         .emif_ddr_ext_phy_ctrl_1        = 0x08020080,
> -       .emif_ddr_ext_phy_ctrl_2        = 0x00700070,
> -       .emif_ddr_ext_phy_ctrl_3        = 0x00700070,
> -       .emif_ddr_ext_phy_ctrl_4        = 0x00700070,
> -       .emif_ddr_ext_phy_ctrl_5        = 0x00700070,
> +       .emif_ddr_ext_phy_ctrl_2        = 0x89,
> +       .emif_ddr_ext_phy_ctrl_3        = 0x90,
> +       .emif_ddr_ext_phy_ctrl_4        = 0x8e,
> +       .emif_ddr_ext_phy_ctrl_5        = 0x8d,
>         .emif_rd_wr_lvl_rmp_win         = 0x0,
> -       .emif_rd_wr_lvl_rmp_ctl         = 0x0,
> -       .emif_rd_wr_lvl_ctl             = 0x0,
> -       .emif_rd_wr_exec_thresh         = 0x00000405
> +       .emif_rd_wr_lvl_rmp_ctl         = 0x00000000,
> +       .emif_rd_wr_lvl_ctl             = 0x00000000,
> +       .emif_rd_wr_exec_thresh         = 0x00000000,
>  };

Merge this hunk with the previous patch in the series?