[U-Boot] [PATCH v2 3/5] board: ti: am43xx: add support for AM43xx Starter Kit

Felipe Balbi balbi at ti.com
Tue Jun 10 22:01:20 CEST 2014


AM43xx Starter Kit is a new board based on
AM437x line of SoCs. Being a low-cost EVM and
small size EVM are intended to provide an entry
level development platform on a full fledged
Hardware System.

Signed-off-by: Felipe Balbi <balbi at ti.com>
---
 board/ti/am43xx/board.c      | 72 +++++++++++++++++++++++++++++++++++++++++++-
 board/ti/am43xx/board.h      |  5 +++
 include/configs/am43xx_evm.h |  2 ++
 3 files changed, 78 insertions(+), 1 deletion(-)

diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
index 6197076..6379cef 100644
--- a/board/ti/am43xx/board.c
+++ b/board/ti/am43xx/board.c
@@ -217,6 +217,28 @@ const struct emif_regs ddr3_emif_regs_400Mhz = {
 	.emif_rd_wr_exec_thresh		= 0x00000405
 };
 
+static const struct emif_regs ddr3_sk_emif_regs_400Mhz = {
+	.sdram_config			= 0x638413b2,
+	.sdram_config2			= 0x00000000,
+	.ref_ctrl			= 0x00000c30,
+	.sdram_tim1			= 0xeaaad4db,
+	.sdram_tim2			= 0x266b7fda,
+	.sdram_tim3			= 0x107f8678,
+	.read_idle_ctrl			= 0x00050000,
+	.zq_config			= 0x50074be4,
+	.temp_alert_config		= 0x0,
+	.emif_ddr_phy_ctlr_1		= 0x0e084008,
+	.emif_ddr_ext_phy_ctrl_1	= 0x08020080,
+	.emif_ddr_ext_phy_ctrl_2	= 0x89,
+	.emif_ddr_ext_phy_ctrl_3	= 0x90,
+	.emif_ddr_ext_phy_ctrl_4	= 0x8e,
+	.emif_ddr_ext_phy_ctrl_5	= 0x8d,
+	.emif_rd_wr_lvl_rmp_win		= 0x0,
+	.emif_rd_wr_lvl_rmp_ctl		= 0x00000000,
+	.emif_rd_wr_lvl_ctl		= 0x00000000,
+	.emif_rd_wr_exec_thresh		= 0x00000000,
+};
+
 const u32 ext_phy_ctrl_const_base_ddr3[] = {
 	0x00400040,
 	0x00350035,
@@ -240,6 +262,48 @@ const u32 ext_phy_ctrl_const_base_ddr3[] = {
 	0x08102040
 };
 
+static const u32 ext_phy_ctrl_const_base_ddr3_sk[] = {
+	/* first 5 are taken care by emif_regs */
+	0x00700070,
+
+	0x00350035,
+	0x00350035,
+	0x00350035,
+	0x00350035,
+	0x00350035,
+
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+
+	0x00150015,
+	0x00150015,
+	0x00150015,
+	0x00150015,
+	0x00150015,
+
+	0x00800080,
+	0x00800080,
+
+	0x40000000,
+
+	0x08102040,
+
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+	0x00000000,
+};
+
 void emif_get_ext_phy_ctrl_const_regs(const u32 **regs, u32 *size)
 {
 	if (board_is_eposevm()) {
@@ -248,6 +312,9 @@ void emif_get_ext_phy_ctrl_const_regs(const u32 **regs, u32 *size)
 	} else if (board_is_gpevm()) {
 		*regs = ext_phy_ctrl_const_base_ddr3;
 		*size = ARRAY_SIZE(ext_phy_ctrl_const_base_ddr3);
+	} else if (board_is_sk()) {
+		*regs = ext_phy_ctrl_const_base_ddr3_sk;
+		*size = ARRAY_SIZE(ext_phy_ctrl_const_base_ddr3_sk);
 	}
 
 	return;
@@ -257,7 +324,7 @@ const struct dpll_params *get_dpll_ddr_params(void)
 {
 	if (board_is_eposevm())
 		return &epos_evm_dpll_ddr;
-	else if (board_is_gpevm())
+	else if (board_is_gpevm() || board_is_sk())
 		return &gp_evm_dpll_ddr;
 
 	printf(" Board '%s' not supported\n", am43xx_board_name);
@@ -410,6 +477,9 @@ void sdram_init(void)
 		enable_vtt_regulator();
 		config_ddr(0, &ioregs_ddr3, NULL, NULL,
 			   &ddr3_emif_regs_400Mhz, 0);
+	} else if (board_is_sk()) {
+		config_ddr(400, &ioregs_ddr3, NULL, NULL,
+			   &ddr3_sk_emif_regs_400Mhz, 0);
 	}
 }
 #endif
diff --git a/board/ti/am43xx/board.h b/board/ti/am43xx/board.h
index 091162e..017047d 100644
--- a/board/ti/am43xx/board.h
+++ b/board/ti/am43xx/board.h
@@ -47,6 +47,11 @@ static inline int board_is_gpevm(void)
 	return !strncmp(am43xx_board_name, "AM43__GP", HDR_NAME_LEN);
 }
 
+static inline int board_is_sk(void)
+{
+	return !strncmp(am43xx_board_name, "AM43__SK", HDR_NAME_LEN);
+}
+
 void enable_uart0_pin_mux(void);
 void enable_board_pin_mux(void);
 void enable_i2c0_pin_mux(void);
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 823cba6..974ce98 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -226,6 +226,8 @@
 			"setenv fdtfile am43x-epos-evm.dtb; fi; " \
 		"if test $board_name = AM43__GP; then " \
 			"setenv fdtfile am437x-gp-evm.dtb; fi; " \
+		"if test $board_name = AM43__SK; then " \
+			"setenv fdtfile am437x-sk-evm.dtb; fi; " \
 		"if test $fdtfile = undefined; then " \
 			"echo WARNING: Could not determine device tree; fi; \0"
 
-- 
2.0.0.rc1



More information about the U-Boot mailing list