[U-Boot] [PULL] : Please pull u-boot-imx

Stefano Babic sbabic at denx.de
Tue Jun 17 19:03:05 CEST 2014


Hi Albert,

please pull from u-boot-imx, thanks !

The following changes since commit 49692c5f517d8e44ed9db0de778728fe7d2a300c:

  net/designware: Make DMA burst length configurable and reduce by
default (2014-05-25 17:23:58 +0200)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to f2f07e8553185022b16adb91581700c86dc3a09a:

  imx: correct HAB status for new chip TO (2014-06-17 17:45:09 +0200)

----------------------------------------------------------------
Eric Nelson (1):
      serial_mxc: disable new features of autobaud detection

Fabio Estevam (9):
      mx6sabreauto: Add the mx6dual-lite variant
      mx6sabred: Add PFUZE100 PMIC support
      mx25pdk: Add generic board support
      mx6: Fix definition of IOMUXC_GPR12_DEVICE_TYPE_RC
      embestmx6boards: Fix CONFIG_CONSOLE_DEV
      embestmx6boards: Fix the dtb file name for riotboard
      mx28evk: Fix warning when CONFIG_ENV_IS_IN_SPI_FLASH is selected
      mx28evk: Add a target for SPI NOR boot
      mx28evk: Add documentation on how to boot from SPI NOR

Marek Vasut (1):
      arm: mx5: Enable CONFIG_SYS_GENERIC_BOARD on M53EVK

Masahiro Yamada (1):
      spl: consolidate arch/arm/include/asm/arch-*/spl.h

Shawn Guo (1):
      mx6: drop ARM errata 742230

Stefano Babic (2):
      MX25: fix build due to missing sys_proto.h
      imx: correct HAB status for new chip TO

Tim Harvey (12):
      spl: nand: add support for mxs nand
      mx6: add common SPL configuration
      mx6: add boot device support for SPL
      imx: add comments and remove unused struct fields
      mx6: add structs for mmdc and ddr iomux registers
      mx6: add mmdc configuration for MX6Q/MX6DL
      imx: iomux: add macros to setup iomux for multiple SoC types
      imx: ventana: split read_eeprom into standalone file
      imx: ventana: auto-configure for IMX6Q vs IMX6DL
      imx: ventana: switch to SPL
      dwc_ahsata: return failure for MX6 if not IMX6Q/IMX6D
      imx: sata: return failure if not IMX6Q/IMX6D

 arch/arm/cpu/arm720t/tegra-common/spl.c     |   2 +-
 arch/arm/cpu/armv7/mx6/Makefile             |   1 +
 arch/arm/cpu/armv7/mx6/ddr.c                | 490
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/cpu/armv7/mx6/hab.c                |  73 +++++++++-
 arch/arm/imx-common/Makefile                |   1 +
 arch/arm/imx-common/cpu.c                   |  16 +--
 arch/arm/imx-common/iomux-v3.c              |  18 ++-
 arch/arm/imx-common/sata.c                  |   7 +-
 arch/arm/imx-common/spl.c                   |  81 +++++++++++
 arch/arm/include/asm/arch-at91/spl.h        |  24 ----
 arch/arm/include/asm/arch-davinci/spl.h     |  16 ---
 arch/arm/include/asm/arch-mx35/spl.h        |  22 ---
 arch/arm/include/asm/arch-mx5/spl.h         |  13 --
 arch/arm/include/asm/arch-mx6/hab.h         |  17 ++-
 arch/arm/include/asm/arch-mx6/imx-regs.h    |   2 +
 arch/arm/include/asm/arch-mx6/iomux.h       |   2 +-
 arch/arm/include/asm/arch-mx6/mx6-ddr.h     | 231
++++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-mx6/sys_proto.h   |   4 +-
 arch/arm/include/asm/arch-tegra114/spl.h    |  22 ---
 arch/arm/include/asm/arch-tegra124/spl.h    |  13 --
 arch/arm/include/asm/arch-tegra20/spl.h     |  12 --
 arch/arm/include/asm/arch-tegra30/spl.h     |  12 --
 arch/arm/include/asm/imx-common/iomux-v3.h  |  25 ++++
 arch/arm/include/asm/spl.h                  |  20 +++
 board/denx/m53evk/m53evk.c                  |   2 +-
 board/freescale/mx28evk/README              |  22 ++-
 board/freescale/mx6qsabreauto/mx6dl.cfg     | 130 +++++++++++++++++
 board/freescale/mx6sabresd/mx6sabresd.c     |  84 +++++++++++
 board/gateworks/gw_ventana/Makefile         |   3 +-
 board/gateworks/gw_ventana/README           |  92 +++++++-----
 board/gateworks/gw_ventana/eeprom.c         |  89 ++++++++++++
 board/gateworks/gw_ventana/gw_ventana.c     | 597
+++++++++++++++++++++++++++++++++++++++++-----------------------------------
 board/gateworks/gw_ventana/gw_ventana.cfg   |  15 --
 board/gateworks/gw_ventana/gw_ventana_spl.c | 419
+++++++++++++++++++++++++++++++++++++++++++++++++++++
 board/gateworks/gw_ventana/ventana_eeprom.h |  11 ++
 boards.cfg                                  |   8 +-
 doc/README.mxs                              |  26 ++++
 drivers/block/dwc_ahsata.c                  |   5 +
 drivers/mtd/nand/Makefile                   |   1 +
 drivers/mtd/nand/mxs_nand_spl.c             | 231
++++++++++++++++++++++++++++++
 drivers/serial/serial_mxc.c                 |   4 +-
 include/configs/embestmx6boards.h           |   4 +-
 include/configs/gw_ventana.h                |  11 ++
 include/configs/imx6_spl.h                  |  71 +++++++++
 include/configs/m53evk.h                    |   1 +
 include/configs/mx25pdk.h                   |   2 +
 include/configs/mx28evk.h                   |   5 +-
 include/configs/mx6_common.h                |   1 -
 include/configs/mx6qsabreauto.h             |   4 +
 include/configs/mx6sabresd.h                |  12 ++
 include/power/pfuze100_pmic.h               |   4 +
 51 files changed, 2475 insertions(+), 503 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/mx6/ddr.c
 create mode 100644 arch/arm/imx-common/spl.c
 delete mode 100644 arch/arm/include/asm/arch-at91/spl.h
 delete mode 100644 arch/arm/include/asm/arch-davinci/spl.h
 delete mode 100644 arch/arm/include/asm/arch-mx35/spl.h
 delete mode 100644 arch/arm/include/asm/arch-mx5/spl.h
 delete mode 100644 arch/arm/include/asm/arch-tegra114/spl.h
 delete mode 100644 arch/arm/include/asm/arch-tegra124/spl.h
 delete mode 100644 arch/arm/include/asm/arch-tegra20/spl.h
 delete mode 100644 arch/arm/include/asm/arch-tegra30/spl.h
 create mode 100644 board/freescale/mx6qsabreauto/mx6dl.cfg
 create mode 100644 board/gateworks/gw_ventana/eeprom.c
 create mode 100644 board/gateworks/gw_ventana/gw_ventana_spl.c
 create mode 100644 drivers/mtd/nand/mxs_nand_spl.c
 create mode 100644 include/configs/imx6_spl.h


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list