[U-Boot] [U-boot] [Patch v2 3/3] k2hk: change default nand ecc layout

[Ivan Khoronzhuk]

For keystyone k2hk board the default nand layout is different
from davinci. So swich ecc layout at init in board file.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk at ti.com>
---
 board/ti/k2hk_evm/board.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/board/ti/k2hk_evm/board.c b/board/ti/k2hk_evm/board.c
index ef90f9d..baa6ab7 100644
--- a/board/ti/k2hk_evm/board.c
+++ b/board/ti/k2hk_evm/board.c
@@ -11,6 +11,7 @@
 #include <exports.h>
 #include <fdt_support.h>
 #include <libfdt.h>
+#include <nand.h>
 
 #include <asm/arch/hardware.h>
 #include <asm/arch/clock.h>
@@ -19,6 +20,7 @@
 #include <asm/arch/emac_defs.h>
 #include <asm/arch/psc_defs.h>
 #include <asm/ti-common/ti-aemif.h>
+#include <asm/ti-common/davinci_nand.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -147,6 +149,15 @@ int cpu_to_bus(u32 *ptr, u32 length)
 	return 0;
 }
 
+int board_nand_init(struct nand_chip *chip)
+{
+	davinci_nand_init(chip);
+	chip->ecc.layout =
+		board_nand_get_ecclayout(NAND_KEYSTONE_RBL_4BIT_LAYOUT);
+
+	return 0;
+}
+
 #if defined(CONFIG_BOARD_EARLY_INIT_F)
 int board_early_init_f(void)
 {
-- 
1.8.3.2