[U-Boot] [Patch v2 0/7] Add support for TQMa6 modules

[Stefano Babic]

Hi Markus,

On 23/06/2014 11:52, Markus Niebel wrote:
> Hello Stefano,
> 
> Am 17.06.2014 19:58, schrieb Stefano Babic:
>> Hi Markus,
>>
>> On 17/06/2014 19:40, Markus Niebel wrote:
>>
>>>> Is it not an attractive alternative for you ? Instead of having several
>>>> entries in boards.cfg for each variation of your board, you could have
>>>> maybe only one or a couple.
>>
>>> Sure it is - main difference will be boot devices.
>>
>> Right - I am expecting then an entry in boards.cfg for each media, that
>> is able to run on all SOCs.
>>
> 
> Do you mean, accepting the board needs the switch to SPL / single image
> support?

No, there is no block about it. My suggestion is to evaluate the
advantages of such solution.

> Or will the current solution - one entry for TQMa6 with MX6Q/D
> and one for TQMa6 with i.MX6S - be accepted?

As I said, no blocking point. It can still be accepted.


Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================