[U-Boot] Running ARMv8 on fast model

Steve Rae srae at broadcom.com
Mon Jun 23 19:30:02 CEST 2014



On 14-06-23 12:01 AM, Youngmin Nam wrote:
> Hello expert.
> I'm trying to run ARMv8 u-boot on fast model. Exactly on Coretex-A57×4 In
> FVP_VE
>
> When I run command "model_shell64 cadi_system_Linux64-Release-GCC-4.6.so
> u-boot.elf"
>
> There isn't any pop up xterm terminal.
>
> My fast model version is 8.3 and I used vexpress_aemv8a configuration on
> denx u-boot mainline.
>
> Does any body test armv8 u-boot on fast model?
>
>
Yes - but...
(1) I am testing vexpress_aemv8a_semi; which is not in master yet -- see:
	http://patchwork.ozlabs.org/patch/357577/
(2) I have inherited a script which "does everything"... However, the 
fundamental piece is:
	./Linux-Release-GCC-4.6/isim_system -C pctl.startup=0.0.0.0 -C 
bp.secure_memory=0 -C cache_state_modelled=0 -C 
bp.pl011_uart0.untimed_fifos=1 -C bp.secureflashloader.fname=bl1.bin

Note: this process actually launches a bootloader (bl1.bin); which is 
then used to launch U-Boot...

I hope this helps,
Thanks, Steve
	

>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>


More information about the U-Boot mailing list