[U-Boot] [PATCH] mtd: atmel-nand: use pmecc_readl(b)/pmecc_writel to access the pmecc register
Josh Wu
josh.wu at atmel.com
Tue Jun 24 12:18:06 CEST 2014
We defined the macro pmecc_readl(b)/pmecc_writel for pmecc register access.
But in the driver we also use the readl(b)/writel.
To keep consistent, this patch make all use pmecc_readl(b)/pmecc_writel.
Signed-off-by: Josh Wu <josh.wu at atmel.com>
---
drivers/mtd/nand/atmel_nand.c | 21 +++++++++++----------
drivers/mtd/nand/atmel_nand_ecc.h | 3 +++
2 files changed, 14 insertions(+), 10 deletions(-)
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index e73834d..ccc4dc0 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -164,7 +164,7 @@ static void pmecc_gen_syndrome(struct mtd_info *mtd, int sector)
/* Fill odd syndromes */
for (i = 0; i < host->pmecc_corr_cap; i++) {
- value = readl(&host->pmecc->rem_port[sector].rem[i / 2]);
+ value = pmecc_readl(host->pmecc, rem_port[sector].rem[i / 2]);
if (i & 1)
value >>= 16;
value &= 0xffff;
@@ -392,10 +392,11 @@ static int pmecc_err_location(struct mtd_info *mtd)
int16_t *smu = host->pmecc_smu;
int timeout = PMECC_MAX_TIMEOUT_US;
- writel(PMERRLOC_DISABLE, &host->pmerrloc->eldis);
+ pmecc_writel(host->pmerrloc, eldis, PMERRLOC_DISABLE);
for (i = 0; i <= host->pmecc_lmu[cap + 1] >> 1; i++) {
- writel(smu[(cap + 1) * num + i], &host->pmerrloc->sigma[i]);
+ pmecc_writel(host->pmerrloc, sigma[i],
+ smu[(cap + 1) * num + i]);
err_nbr++;
}
@@ -403,12 +404,12 @@ static int pmecc_err_location(struct mtd_info *mtd)
if (sector_size == 1024)
val |= PMERRLOC_ELCFG_SECTOR_1024;
- writel(val, &host->pmerrloc->elcfg);
- writel(sector_size * 8 + host->pmecc_degree * cap,
- &host->pmerrloc->elen);
+ pmecc_writel(host->pmerrloc, elcfg, val);
+ pmecc_writel(host->pmerrloc, elen,
+ sector_size * 8 + host->pmecc_degree * cap);
while (--timeout) {
- if (readl(&host->pmerrloc->elisr) & PMERRLOC_CALC_DONE)
+ if (pmecc_readl(host->pmerrloc, elisr) & PMERRLOC_CALC_DONE)
break;
WATCHDOG_RESET();
udelay(1);
@@ -419,7 +420,7 @@ static int pmecc_err_location(struct mtd_info *mtd)
return -1;
}
- roots_nbr = (readl(&host->pmerrloc->elisr) & PMERRLOC_ERR_NUM_MASK)
+ roots_nbr = (pmecc_readl(host->pmerrloc, elisr) & PMERRLOC_ERR_NUM_MASK)
>> 8;
/* Number of roots == degree of smu hence <= cap */
if (roots_nbr == host->pmecc_lmu[cap + 1] >> 1)
@@ -443,7 +444,7 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
sector_size = host->pmecc_sector_size;
while (err_nbr) {
- tmp = readl(&host->pmerrloc->el[i]) - 1;
+ tmp = pmecc_readl(host->pmerrloc, el[i]) - 1;
byte_pos = tmp / 8;
bit_pos = tmp % 8;
@@ -597,7 +598,7 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
pos = i * host->pmecc_bytes_per_sector + j;
chip->oob_poi[eccpos[pos]] =
- readb(&host->pmecc->ecc_port[i].ecc[j]);
+ pmecc_readb(host->pmecc, ecc_port[i].ecc[j]);
}
}
chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h
index 55d7711..92d4ec5 100644
--- a/drivers/mtd/nand/atmel_nand_ecc.h
+++ b/drivers/mtd/nand/atmel_nand_ecc.h
@@ -34,6 +34,9 @@
#define pmecc_readl(addr, reg) \
readl(&addr->reg)
+#define pmecc_readb(addr, reg) \
+ readb(&addr->reg)
+
#define pmecc_writel(addr, reg, value) \
writel((value), &addr->reg)
--
1.7.9.5
More information about the U-Boot
mailing list