[U-Boot] [U-boot] [Patch v3 3/3] k2hk: change default nand ecc layout

[Scott Wood]

On Tue, 2014-06-24 at 16:49 +0300, Ivan Khoronzhuk wrote:
> For keystyone k2hk board the default nand layout is different
> from davinci. So swich ecc layout at init in board file.
> 
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk at ti.com>
> ---
>  board/ti/k2hk_evm/board.c | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/board/ti/k2hk_evm/board.c b/board/ti/k2hk_evm/board.c
> index ef90f9d..baa6ab7 100644
> --- a/board/ti/k2hk_evm/board.c
> +++ b/board/ti/k2hk_evm/board.c
> @@ -11,6 +11,7 @@
>  #include <exports.h>
>  #include <fdt_support.h>
>  #include <libfdt.h>
> +#include <nand.h>
>  
>  #include <asm/arch/hardware.h>
>  #include <asm/arch/clock.h>
> @@ -19,6 +20,7 @@
>  #include <asm/arch/emac_defs.h>
>  #include <asm/arch/psc_defs.h>
>  #include <asm/ti-common/ti-aemif.h>
> +#include <asm/ti-common/davinci_nand.h>
>  
>  DECLARE_GLOBAL_DATA_PTR;
>  
> @@ -147,6 +149,15 @@ int cpu_to_bus(u32 *ptr, u32 length)
>  	return 0;
>  }
>  
> +int board_nand_init(struct nand_chip *chip)
> +{
> +	davinci_nand_init(chip);
> +	chip->ecc.layout =
> +		board_nand_get_ecclayout(NAND_KEYSTONE_RBL_4BIT_LAYOUT);

Again, why not use board_nand_set_ecclayout()?

-Scott