[U-Boot] [PATCH v3 3/4] usb/gadget: fastboot: add support for flash command

[Steve Rae]

- implement 'fastboot flash' for eMMC devices

Signed-off-by: Steve Rae <srae at broadcom.com>
---

Changes in v3: None
Changes in v2:
- update README.android-fastboot file

 README                          | 10 ++++++++++
 doc/README.android-fastboot     |  5 +++--
 drivers/usb/gadget/f_fastboot.c | 31 +++++++++++++++++++++++++++++++
 3 files changed, 44 insertions(+), 2 deletions(-)

diff --git a/README b/README
index fe5cacb..984db6d 100644
--- a/README
+++ b/README
@@ -1623,6 +1623,16 @@ The following options need to be configured:
 		downloads. This buffer should be as large as possible for a
 		platform. Define this to the size available RAM for fastboot.
 
+		CONFIG_FASTBOOT_FLASH
+		The fastboot protocol includes a "flash" command for writing
+		the downloaded image to a non-volatile storage device. Define
+		this to enable the "fastboot flash" command.
+
+		CONFIG_FASTBOOT_FLASH_MMC_DEV
+		The fastboot "flash" command requires addition information
+		regarding the non-volatile storage device. Define this to
+		the eMMC device that fastboot should use to store the image.
+
 - Journaling Flash filesystem support:
 		CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
 		CONFIG_JFFS2_NAND_DEV
diff --git a/doc/README.android-fastboot b/doc/README.android-fastboot
index f1d128c..430e29c 100644
--- a/doc/README.android-fastboot
+++ b/doc/README.android-fastboot
@@ -6,8 +6,9 @@ Overview
 The protocol that is used over USB is described in
 README.android-fastboot-protocol in same directory.
 
-The current implementation does not yet support the flash and erase
-commands.
+The current implementation does not yet support the erase command or the
+"oem format" command, and there is minimal support for the flash command;
+it only supports eMMC devices.
 
 Client installation
 ===================
diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
index 9dd85b6..89c2d3e 100644
--- a/drivers/usb/gadget/f_fastboot.c
+++ b/drivers/usb/gadget/f_fastboot.c
@@ -19,6 +19,9 @@
 #include <linux/compiler.h>
 #include <version.h>
 #include <g_dnl.h>
+#ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV
+#include <fb_mmc.h>
+#endif
 
 #define FASTBOOT_VERSION		"0.4"
 
@@ -466,6 +469,28 @@ static void cb_boot(struct usb_ep *ep, struct usb_request *req)
 	fastboot_tx_write_str("OKAY");
 }
 
+#ifdef CONFIG_FASTBOOT_FLASH
+static void cb_flash(struct usb_ep *ep, struct usb_request *req)
+{
+	char *cmd = req->buf;
+	char response[RESPONSE_LEN];
+
+	strsep(&cmd, ":");
+	if (!cmd) {
+		printf("%s: missing partition name\n", __func__);
+		fastboot_tx_write_str("FAILmissing partition name");
+		return;
+	}
+
+	strcpy(response, "FAILno flash device defined");
+#ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV
+	fb_mmc_flash_write(cmd, (void *)CONFIG_USB_FASTBOOT_BUF_ADDR,
+			   download_bytes, response);
+#endif
+	fastboot_tx_write_str(response);
+}
+#endif
+
 struct cmd_dispatch_info {
 	char *cmd;
 	void (*cb)(struct usb_ep *ep, struct usb_request *req);
@@ -485,6 +510,12 @@ static const struct cmd_dispatch_info cmd_dispatch_info[] = {
 		.cmd = "boot",
 		.cb = cb_boot,
 	},
+#ifdef CONFIG_FASTBOOT_FLASH
+	{
+		.cmd = "flash",
+		.cb = cb_flash,
+	},
+#endif
 };
 
 static void rx_handler_command(struct usb_ep *ep, struct usb_request *req)
-- 
1.8.5