[U-Boot] [PATCH v3 0/4] Implement "fastboot flash" for eMMC

Steve Rae srae at broadcom.com
Thu Jun 26 22:13:20 CEST 2014


This series implements the "fastboot flash" command for eMMC devices.
It supports both raw and sparse images.

NOTES:
- the support for the "fastboot flash" command is enabled with CONFIG_FASTBOOT_FLASH
- the support for eMMC is enabled with CONFIG_FASTBOOT_FLASH_MMC_DEV
- (future) the support for NAND would be enabled with CONFIG_FASTBOOT_FLASH_NAND(???)

This has been tested on ARMv7.

Changes in v3:
- remove most references to 'mmc',
  which leaves only one mmc specific function: mmc_get_dev()

Changes in v2:
- split large function into three
- improved handling of response messages
- additional partition size checking when writing sparse image
- update README.android-fastboot file
- new in v2

Steve Rae (4):
  usb/gadget: fastboot: add sparse image definitions
  usb/gadget: fastboot: add eMMC support for flash command
  usb/gadget: fastboot: add support for flash command
  usb/gadget: fastboot: minor cleanup

 README                          |  10 +++
 common/Makefile                 |   5 ++
 common/fb_mmc.c                 | 190 ++++++++++++++++++++++++++++++++++++++++
 doc/README.android-fastboot     |   5 +-
 drivers/usb/gadget/f_fastboot.c |  41 ++++++++-
 include/fb_mmc.h                |   8 ++
 include/sparse_format.h         |  58 ++++++++++++
 7 files changed, 312 insertions(+), 5 deletions(-)
 create mode 100644 common/fb_mmc.c
 create mode 100644 include/fb_mmc.h
 create mode 100644 include/sparse_format.h

-- 
1.8.5



More information about the U-Boot mailing list