[U-Boot] Why spi flash probe runs twice on Xilinx Zynq board ?

[Heshsham Abdul Basit]

On 30 June 2014 16:37, Jagan Teki <jagannadh.teki at gmail.com> wrote:

> On Mon, Jun 30, 2014 at 4:32 PM, Heshsham Abdul Basit
> <hf.basit at gmail.com> wrote:
> >
> >
> >
> > On 30 June 2014 16:30, Jagan Teki <jagannadh.teki at gmail.com> wrote:
> >>
> >> On Mon, Jun 30, 2014 at 4:18 PM, Heshsham Abdul Basit
> >> <hf.basit at gmail.com> wrote:
> >> > Thanks for your comments Thomas and  Jagan!
> >> >
> >> >
> >> > On 30 June 2014 15:58, Jagan Teki <jagannadh.teki at gmail.com> wrote:
> >> >>
> >> >> I guess - your using Xilinx github u-boot-xlnx
> >> >>
> >> >
> >> > Yes
> >> >
> >> >>
> >> >> The reason for two prints is like, for
> >> >> 1) Initial probe print, by default done in env calls
> >> >> 2) Added in sf probe again on auto-boot commands [1]
> >> >>
> >> >> [1]
> >> >>
> >> >>
> https://github.com/Xilinx/u-boot-xlnx/blob/master/include/configs/zynq-common.h
> >> >>
> >> >
> >> > Ok. I will study it.
> >> >
> >> >
> >> > BTW is it technically possible to completely get rid of the second
> >> > probing
> >> > which I boot from flash?
> >>
> >> Do you have any issue with the second print, it's probing once aging
> >> before reading?
> >>
> >
> > The only problem is , it is taking significant time for my application. I
> > though if I remove this second probing I could save some time!
>
> Yes - you can please post your query to git at xilinx.com as it's Xilinx
> git specific.
>

Ok, I will post it now in git at Xilinx.com
Many thanks for your suggestions.



> >
> >
> >>
> >> >
> >> > Thanks
> >> >
> >> >>
> >> >> On Sat, Jun 28, 2014 at 10:51 PM, Heshsham Abdul Basit
> >> >> <hf.basit at gmail.com> wrote:
> >> >> >  Hi,
> >> >> >
> >> >> > I am re-sending this email because earlier I forgot to put the
> >> >> > subject
> >> >> > line
> >> >> > properly. I am struggling to figure out few things in u-boot , but
> I
> >> >> > failed
> >> >> > to get a good resource or help.
> >> >> >
> >> >> > This is a section of the log from u-boot running on Avnet Microzed
> >> >> > board:
> >> >> >
> >> >> >
> >> >> > [Thu Jun 26 17:40:53.656 2014]
> >> >> >
> >> >> > [Thu Jun 26 17:40:53.656 2014]
> >> >> >
> >> >> > [Thu Jun 26 17:40:53.656 2014] U-Boot 2013.07 (Jun 26 2014 -
> >> >> > 17:34:41)
> >> >> >
> >> >> > [Thu Jun 26 17:40:53.656 2014]
> >> >> >
> >> >> > [Thu Jun 26 17:40:53.656 2014] 1 GiB
> >> >> >
> >> >> > [Thu Jun 26 17:40:53.671 2014] SF: Detected
> >> >> > S25FL129P_64K/S25FL128S_64K with page size 64 KiB, total 16 MiB
> >> >> >
> >> >> > [Thu Jun 26 17:40:53.703 2014] *** Warning - bad CRC, using default
> >> >> > environment
> >> >> >
> >> >> > [Thu Jun 26 17:40:53.703 2014]
> >> >> >
> >> >> > [Thu Jun 26 17:40:53.703 2014] In:    serial
> >> >> >
> >> >> > [Thu Jun 26 17:40:53.703 2014] Out:   serial
> >> >> >
> >> >> > [Thu Jun 26 17:40:53.703 2014] Err:   serial
> >> >> >
> >> >> > [Thu Jun 26 17:40:53.703 2014] U-BOOT for suheb_24
> >> >> >
> >> >> > [Thu Jun 26 17:40:53.703 2014]
> >> >> >
> >> >> > [Thu Jun 26 17:40:53.703 2014]
> >> >> >
> >> >> > [Thu Jun 26 17:40:53.703 2014] SF: Detected
> >> >> > S25FL129P_64K/S25FL128S_64K with page size 64 KiB, total 16 MiB
> >> >> >
> >> >> > [Thu Jun 26 17:40:54.453 2014] SF: 5242880 bytes @ 0x520000 Read:
> OK
> >> >> >
> >> >> > [Thu Jun 26 17:40:54.453 2014]      Description:  PetaLinux Kernel
> >> >> >
> >> >> > [Thu Jun 26 17:40:54.453 2014] 0x010000f0
> >> >> >
> >> >> > [Thu Jun 26 17:40:54.453 2014] 4620145 Bytes = 4.4 MiB
> >> >> >
> >> >> > [Thu Jun 26 17:40:54.453 2014]      Description:  Flattened Device
> >> >> > Tree
> >> >> > blob
> >> >> >
> >> >> > [Thu Jun 26 17:40:54.453 2014] 0x01468114
> >> >> >
> >> >> > [Thu Jun 26 17:40:54.453 2014] 9766 Bytes = 9.5 KiB
> >> >> >
> >> >> > [Thu Jun 26 17:40:54.453 2014]      Hash algo:    crc32
> >> >> >
> >> >> > [Thu Jun 26 17:40:54.453 2014]      Hash value:   9a94aca8
> >> >> >
> >> >> > [Thu Jun 26 17:40:54.453 2014]      Hash algo:    sha1
> >> >> >
> >> >> > [Thu Jun 26 17:40:54.453 2014]      Hash value:
> >> >> > 97b81e3014decb706ff19e61e1227dace97d4232
> >> >> >
> >> >> > [Thu Jun 26 17:40:54.453 2014] crc32+ sha1+  Uncompressing Kernel
> >> >> > Image
> >> >> > ...
> >> >> > OK
> >> >> >
> >> >> > .
> >> >> > .I noticed that the following lines are coming twice:
> >> >> >
> >> >> > SF: Detected S25FL129P_64K/S25FL128S_64K with page size 64 KiB,
> total
> >> >> > 16
> >> >> > MiB
> >> >> >
> >> >> > This corresponds to the function spi_flash_probe from
> >> >> > drivers/mtd/spi/spi_flash.c
> >> >> >
> >> >> >
> >> >> > I need to know:
> >> >> >
> >> >> > 1- Why it is probed twice?
> >> >> > 2- The name and location of the file from where it is called
> (twice).
> >> >> > 3- The second time it is being probed  is considerably slow, why it
> >> >> > is
> >> >> > so?
> >> >> >
> >> >> >
> >> >> > I have searched many forums and have looked in the code but still I
> >> >> > am
> >> >> > not
> >> >> > able to figure out these things.
> >> >> >
> >> >> >
> >> >> >
> >> >> > Thanks and regards,
> >> >> >
> >> >> > Abdul Basit
> >> >> >
> >> >> > _______________________________________________
> >> >> > U-Boot mailing list
> >> >> > U-Boot at lists.denx.de
> >> >> > http://lists.denx.de/mailman/listinfo/u-boot
> >> >> >
> >> >>
> >> >> thanks!
> >> >> --
> >> >> Jagan.
> >> >
> >> >
> >>
> >>
> >>
> >> --
> >> Jagan.
> >
> >
>
>
>
> --
> Jagan.
>