[U-Boot] [U-Boot PATCH v2 08/12] k2hk: add support for k2hk SOC and EVM

[Murali Karicheri]

diff --git a/Makefile b/Makefile
index 47a03e3..ea2a387 100644
--- a/Makefile
+++ b/Makefile
@@ -491,6 +491,23 @@ $(obj)u-boot.spr:	$(obj)u-boot.img $(obj)spl/u-boot-spl.bin
  			--pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff $@
  		cat $(obj)u-boot.img >> $@
  
+$(obj)u-boot-spi.gph:	$(obj)u-boot.img $(obj)spl/u-boot-spl.bin
+		$(obj)tools/mkimage -A $(ARCH) -T gpimage -C none \
+			-a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) \
+			-n SPL -d $(obj)spl/u-boot-spl.bin $(obj)spl/u-boot-spl.gph
+		$(OBJCOPY) ${OBJCFLAGS} -I binary \
+			--pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0 -O binary \
+			$(obj)spl/u-boot-spl.gph $(obj)spl/u-boot-spl-pad.gph
+		cat $(obj)spl/u-boot-spl-pad.gph $(obj)u-boot.img > $@
+
+$(obj)u-boot-nand.gph:	$(obj)u-boot.bin
+		$(obj)tools/mkimage -A $(ARCH) -T gpimage -C none \
+			-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
+			-n U-Boot -d $(obj)u-boot.bin $(obj)gph-u-boot.bin
+		@dd if=/dev/zero of=$(obj)zero.bin bs=8 count=1 2>/dev/null
+		@cat $(obj)gph-u-boot.bin $(obj)zero.bin > $@
+		@rm $(obj)zero.bin

> First, these need re-writing for Kbuild.  Second, we don't ever use
> u-boot-nand.gph or talk about it in the README, do we?
Tom,

Will remove remove u-boot-nand.gph for time being as we didn't verify 
nand boot in this
series. What you mean by re-writing for kbuild. The u-boot-spi.gph 
target is added similar to
existing u-boot-spr (see just above this target). Could you provide an 
example?

Murali