[U-Boot] [U-Boot, v8] nand: add Faraday FTNANDC021 NAND controller support

[Kuo-Jung Su]

Got it, thanks, and sorry for the mess I made.

I'll send out the unsplit patch after the Faraday platform patches got commited.

2014-03-04 10:17 GMT+08:00 Scott Wood <scottwood at freescale.com>:
> On Thu, Nov 28, 2013 at 10:48:51AM +0800, Kuo-Jung Su wrote:
>> From: Kuo-Jung Su <dantesu at faraday-tech.com>
>>
>> Faraday FTNANDC021 is an integrated NAND flash controller.
>> It use a build-in command table to abstract the underlying
>> NAND flash control logic.
>>
>> For example:
>>
>> Issuing a command 0x10 to FTNANDC021 would result in
>> a page write + a read status operation.
>>
>> Signed-off-by: Kuo-Jung Su <dantesu at faraday-tech.com>
>> CC: Albert ARIBAUD <albert.u.boot at aribaud.net>
>> CC: Scott Wood <scottwood at freescale.com>
>>
>> ---
>> Changes for v8:
>>    - Add ftnandc021 spl driver
>>    - Drop '#include <asm/unaligned.h>'
>>    - Coding style cleanup
>>    - Update NAND flash ecc layout
>>    - Split from Faraday A36x patch series
>
> Acked-by: Scott Wood <scottwood at freescale.com>
>
> Please unsplit (or just have the custodian that takes the other Faraday
> patches take this with the ack).  My understanding is that U-Boot's dead
> code rules prevent me from applying this separately from a board that
> uses it (it also makes it hard for me to verify that it builds).
>
> -Scott



-- 
Best wishes,
Kuo-Jung Su