[U-Boot] [PATCH v3 2/4] highbank: use scsi_init hook

[Ian Campbell]

Signed-off-by: Ian Campbell <ijc at hellion.org.uk>
---
 board/highbank/highbank.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/board/highbank/highbank.c b/board/highbank/highbank.c
index 4b272c7..d42447d 100644
--- a/board/highbank/highbank.c
+++ b/board/highbank/highbank.c
@@ -51,17 +51,23 @@ int board_eth_init(bd_t *bis)
 	return rc;
 }
 
-#ifdef CONFIG_MISC_INIT_R
-int misc_init_r(void)
+#ifdef CONFIG_SCSI_AHCI_PLAT
+void scsi_init(void)
 {
-	char envbuffer[16];
-	u32 boot_choice;
 	u32 reg = readl(HB_SREG_A9_PWRDOM_STAT);
 
 	if (reg & PWRDOM_STAT_SATA) {
 		ahci_init(HB_AHCI_BASE);
 		scsi_scan(1);
 	}
+}
+#endif
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+	char envbuffer[16];
+	u32 boot_choice;
 
 	boot_choice = readl(HB_SREG_A9_BOOT_SRC_STAT) & 0xff;
 	sprintf(envbuffer, "bootcmd%d", boot_choice);
-- 
1.8.5.3