[U-Boot] [PATCH V5 12/12] board:trats2: Enable device tree on Trats2
Piotr Wilczek
p.wilczek at samsung.com
Fri Mar 7 14:59:49 CET 2014
This patch enables to run Trats2 board on device tree.
Signed-off-by: Piotr Wilczek <p.wilczek at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
CC: Minkyu Kang <mk7.kang at samsung.com>
---
Changes for v5:
- changed the name of exynos_lcd_panel_init to exynos_lcd_misc_init
Changes for v4:
- use "-" hypen in DT bindings
- define CONFIG_ENV_SIZE, CONFIG_ENV_OFFSET, CONFIG_CMD_I2C at each board
Changes for v3:
- dts file moved to arch/arm/dts
Changes for v2:
- fixed mmc2 address in DT
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/exynos4412-trats2.dts | 434 +++++++++++++++++++++++++++++++++++++
board/samsung/trats2/trats2.c | 233 +-------------------
include/configs/trats2.h | 204 ++++-------------
4 files changed, 483 insertions(+), 391 deletions(-)
create mode 100644 arch/arm/dts/exynos4412-trats2.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index a853ec6..631a9be 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1,6 +1,7 @@
dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \
exynos4210-universal_c210.dtb \
- exynos4210-trats.dtb
+ exynos4210-trats.dtb \
+ exynos4412-trats2.dtb
dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \
exynos5250-snow.dtb \
diff --git a/arch/arm/dts/exynos4412-trats2.dts b/arch/arm/dts/exynos4412-trats2.dts
new file mode 100644
index 0000000..7d32067
--- /dev/null
+++ b/arch/arm/dts/exynos4412-trats2.dts
@@ -0,0 +1,434 @@
+/*
+ * Samsung's Exynos4412 based Trats2 board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+/include/ "exynos4.dtsi"
+
+/ {
+ model = "Samsung Trats2 based on Exynos4412";
+ compatible = "samsung,trats2", "samsung,exynos4412";
+
+ config {
+ samsung,dsim-device-name = "s6e8ax0";
+ };
+
+ aliases {
+ i2c0 = "/i2c at 13860000";
+ i2c1 = "/i2c at 13870000";
+ i2c2 = "/i2c at 13880000";
+ i2c3 = "/i2c at 13890000";
+ i2c4 = "/i2c at 138a0000";
+ i2c5 = "/i2c at 138b0000";
+ i2c6 = "/i2c at 138c0000";
+ i2c7 = "/i2c at 138d0000";
+ serial0 = "/serial at 13800000";
+ console = "/serial at 13820000";
+ mmc0 = "sdhci at 12510000";
+ mmc2 = "sdhci at 12530000";
+ };
+
+ i2c at 138d0000 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <100000>;
+ status = "okay";
+
+ max77686_pmic at 09 {
+ compatible = "maxim,max77686_pmic";
+ interrupts = <7 0>;
+ reg = <0x09 0 0>;
+ #clock-cells = <1>;
+
+ voltage-regulators {
+ ldo1_reg: ldo1 {
+ regulator-compatible = "LDO1";
+ regulator-name = "VALIVE_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-mem-on;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-compatible = "LDO2";
+ regulator-name = "VM1M2_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-mem-on;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-compatible = "LDO3";
+ regulator-name = "VCC_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-mem-on;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-compatible = "LDO4";
+ regulator-name = "VCC_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-mem-on;
+ };
+
+ ldo5_reg: ldo5 {
+ regulator-compatible = "LDO5";
+ regulator-name = "VCC_1.8V_IO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-mem-on;
+ };
+
+ ldo6_reg: ldo6 {
+ regulator-compatible = "LDO6";
+ regulator-name = "VMPLL_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-mem-on;
+ };
+
+ ldo7_reg: ldo7 {
+ regulator-compatible = "LDO7";
+ regulator-name = "VPLL_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-mem-on;
+ };
+
+ ldo8_reg: ldo8 {
+ regulator-compatible = "LDO8";
+ regulator-name = "VMIPI_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-mem-off;
+ };
+
+ ldo9_reg: ldo9 {
+ regulator-compatible = "LDO9";
+ regulator-name = "CAM_ISP_MIPI_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-mem-idle;
+ };
+
+ ldo10_reg: ldo10 {
+ regulator-compatible = "LDO10";
+ regulator-name = "VMIPI_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-mem-off;
+ };
+
+ ldo11_reg: ldo11 {
+ regulator-compatible = "LDO11";
+ regulator-name = "VABB1_1.95V";
+ regulator-min-microvolt = <1950000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-always-on;
+ regulator-mem-off;
+ };
+
+ ldo12_reg: ldo12 {
+ regulator-compatible = "LDO12";
+ regulator-name = "VUOTG_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-mem-off;
+ };
+
+ ldo13_reg: ldo13 {
+ regulator-compatible = "LDO13";
+ regulator-name = "NFC_AVDD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-mem-idle;
+ };
+
+ ldo14_reg: ldo14 {
+ regulator-compatible = "LDO14";
+ regulator-name = "VABB2_1.95V";
+ regulator-min-microvolt = <1950000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-always-on;
+ regulator-mem-off;
+ };
+
+ ldo15_reg: ldo15 {
+ regulator-compatible = "LDO15";
+ regulator-name = "VHSIC_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-mem-off;
+ };
+
+ ldo16_reg: ldo16 {
+ regulator-compatible = "LDO16";
+ regulator-name = "VHSIC_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-mem-off;
+ };
+
+ ldo17_reg: ldo17 {
+ regulator-compatible = "LDO17";
+ regulator-name = "CAM_SENSOR_CORE_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-mem-idle;
+ };
+
+ ldo18_reg: ldo18 {
+ regulator-compatible = "LDO18";
+ regulator-name = "CAM_ISP_SEN_IO_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-mem-idle;
+ };
+
+ ldo19_reg: ldo19 {
+ regulator-compatible = "LDO19";
+ regulator-name = "VT_CAM_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-mem-idle;
+ };
+
+ ldo20_reg: ldo20 {
+ regulator-compatible = "LDO20";
+ regulator-name = "VDDQ_PRE_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-mem-idle;
+ };
+
+ ldo21_reg: ldo21 {
+ regulator-compatible = "LDO21";
+ regulator-name = "VTF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-mem-idle;
+ };
+
+ ldo22_reg: ldo22 {
+ regulator-compatible = "LDO22";
+ regulator-name = "VMEM_VDD_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-mem-off;
+ };
+
+ ldo23_reg: ldo23 {
+ regulator-compatible = "LDO23";
+ regulator-name = "TSP_AVDD_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-mem-idle;
+ };
+
+ ldo24_reg: ldo24 {
+ regulator-compatible = "LDO24";
+ regulator-name = "TSP_VDD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-mem-idle;
+ };
+
+ ldo25_reg: ldo25 {
+ regulator-compatible = "LDO25";
+ regulator-name = "LCD_VCC_3.3V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-mem-idle;
+ };
+
+ ldo26_reg: ldo26 {
+ regulator-compatible = "LDO26";
+ regulator-name = "MOTOR_VCC_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-mem-idle;
+ };
+
+ buck1_reg: buck1 {
+ regulator-compatible = "BUCK1";
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-mem-off;
+ };
+
+ buck2_reg: buck2 {
+ regulator-compatible = "BUCK2";
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-mem-off;
+ };
+
+ buck3_reg: buck3 {
+ regulator-compatible = "BUCK3";
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-mem-off;
+ };
+
+ buck4_reg: buck4 {
+ regulator-compatible = "BUCK4";
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-mem-off;
+ };
+
+ buck5_reg: buck5 {
+ regulator-compatible = "BUCK5";
+ regulator-name = "VMEM_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ buck6_reg: buck6 {
+ regulator-compatible = "BUCK6";
+ regulator-name = "VCC_SUB_1.35V";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ buck7_reg: buck7 {
+ regulator-compatible = "BUCK7";
+ regulator-name = "VCC_SUB_2.0V";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: buck8 {
+ regulator-compatible = "BUCK8";
+ regulator-name = "VMEM_VDDF_3.0V";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ regulator-mem-off;
+ };
+
+ buck9_reg: buck9 {
+ regulator-compatible = "BUCK9";
+ regulator-name = "CAM_ISP_CORE_1.2V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-mem-off;
+ };
+ };
+ };
+ };
+
+ fimd at 11c00000 {
+ compatible = "samsung,exynos-fimd";
+ reg = <0x11c00000 0xa4>;
+
+ samsung,vl-freq = <60>;
+ samsung,vl-col = <720>;
+ samsung,vl-row = <1280>;
+ samsung,vl-width = <720>;
+ samsung,vl-height = <1280>;
+
+ samsung,vl-clkp = <0>;
+ samsung,vl-oep = <0>;
+ samsung,vl-hsp = <1>;
+ samsung,vl-vsp = <1>;
+ samsung,vl-dp = <1>;
+ samsung,vl-bpix = <4>;
+
+ samsung,vl-hspw = <5>;
+ samsung,vl-hbpd = <10>;
+ samsung,vl-hfpd = <10>;
+ samsung,vl-vspw = <2>;
+ samsung,vl-vbpd = <1>;
+ samsung,vl-vfpd = <13>;
+ samsung,vl-cmd-allow-len = <0xf>;
+
+ samsung,winid = <0>;
+ samsung,power-on-delay = <30>;
+ samsung,interface-mode = <1>;
+ samsung,mipi-enabled = <1>;
+ samsung,dp-enabled;
+ samsung,dual-lcd-enabled;
+
+ samsung,logo-on = <1>;
+ samsung,resolution = <0>;
+ samsung,rgb-mode = <0>;
+ };
+
+ mipidsi at 11c80000 {
+ compatible = "samsung,exynos-mipi-dsi";
+ reg = <0x11c80000 0x5c>;
+
+ samsung,dsim-config-e-interface = <1>;
+ samsung,dsim-config-e-virtual-ch = <0>;
+ samsung,dsim-config-e-pixel-format = <7>;
+ samsung,dsim-config-e-burst-mode = <1>;
+ samsung,dsim-config-e-no-data-lane = <3>;
+ samsung,dsim-config-e-byte-clk = <0>;
+ samsung,dsim-config-hfp = <1>;
+
+ samsung,dsim-config-p = <3>;
+ samsung,dsim-config-m = <120>;
+ samsung,dsim-config-s = <1>;
+
+ samsung,dsim-config-pll-stable-time = <500>;
+ samsung,dsim-config-esc-clk = <20000000>;
+ samsung,dsim-config-stop-holding-cnt = <0x7ff>;
+ samsung,dsim-config-bta-timeout = <0xff>;
+ samsung,dsim-config-rx-timeout = <0xffff>;
+
+ samsung,dsim-device-id = <0xffffffff>;
+ samsung,dsim-device-bus-id = <0>;
+
+ samsung,dsim-device-reverse-panel = <1>;
+ };
+
+ sdhci at 12510000 {
+ samsung,bus-width = <8>;
+ samsung,timing = <1 3 3>;
+ pwr-gpios = <&gpio 0x2004002 0>;
+ };
+
+ sdhci at 12520000 {
+ status = "disabled";
+ };
+
+ sdhci at 12530000 {
+ samsung,bus-width = <4>;
+ samsung,timing = <1 2 3>;
+ cd-gpios = <&gpio 0x20C6004 0>;
+ };
+
+ sdhci at 12540000 {
+ status = "disabled";
+ };
+};
diff --git a/board/samsung/trats2/trats2.c b/board/samsung/trats2/trats2.c
index c17c24d..2a6c9f9 100644
--- a/board/samsung/trats2/trats2.c
+++ b/board/samsung/trats2/trats2.c
@@ -8,15 +8,9 @@
#include <common.h>
#include <lcd.h>
-#include <asm/io.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/power.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/mipi_dsim.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/power.h>
+#include <asm/arch/mipi_dsim.h>
#include <power/pmic.h>
#include <power/max77686_pmic.h>
#include <power/battery.h>
@@ -28,7 +22,6 @@
#include <usb.h>
#include <usb/s3c_udc.h>
#include <usb_mass_storage.h>
-#include <samsung/misc.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -69,16 +62,6 @@ static void check_hw_revision(void)
board_rev = modelrev << 8;
}
-#ifdef CONFIG_DISPLAY_BOARDINFO
-int checkboard(void)
-{
- puts("Board:\tTRATS2\n");
- printf("HW Revision:\t0x%04x\n", board_rev);
-
- return 0;
-}
-#endif
-
u32 get_board_rev(void)
{
return board_rev;
@@ -156,33 +139,24 @@ int get_soft_i2c_sda_pin(void)
}
#endif
-int board_early_init_f(void)
+int exynos_early_init_f(void)
{
- check_hw_revision();
board_external_gpio_init();
- gd->flags |= GD_FLG_DISABLE_CONSOLE;
-
return 0;
}
static int pmic_init_max77686(void);
-int board_init(void)
+int exynos_init(void)
{
- struct exynos4_power *pwr =
- (struct exynos4_power *)samsung_get_base_power();
-
- gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
- /* workaround: clear INFORM4..5 */
- writel(0, (unsigned int)&pwr->inform4);
- writel(0, (unsigned int)&pwr->inform5);
+ check_hw_revision();
+ printf("HW Revision:\t0x%04x\n", board_rev);
return 0;
}
-int power_init_board(void)
+int exynos_power_init(void)
{
int chrg;
struct power_battery *pb;
@@ -248,90 +222,6 @@ int power_init_board(void)
return 0;
}
-int dram_init(void)
-{
- u32 size_mb;
-
- size_mb = (get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) +
- get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE) +
- get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE) +
- get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE)) >> 20;
-
- gd->ram_size = size_mb << 20;
-
- return 0;
-}
-
-void dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
- gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
- gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
- gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
- gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
- gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
-}
-
-int board_mmc_init(bd_t *bis)
-{
- int err0, err2 = 0;
-
- gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2();
-
- /* eMMC_EN: SD_0_CDn: GPK0[2] Output High */
- s5p_gpio_direction_output(&gpio2->k0, 2, 1);
- s5p_gpio_set_pull(&gpio2->k0, 2, GPIO_PULL_NONE);
-
- /*
- * eMMC GPIO:
- * SDR 8-bit at 48MHz at MMC0
- * GPK0[0] SD_0_CLK(2)
- * GPK0[1] SD_0_CMD(2)
- * GPK0[2] SD_0_CDn -> Not used
- * GPK0[3:6] SD_0_DATA[0:3](2)
- * GPK1[3:6] SD_0_DATA[0:3](3)
- *
- * DDR 4-bit at 26MHz at MMC4
- * GPK0[0] SD_4_CLK(3)
- * GPK0[1] SD_4_CMD(3)
- * GPK0[2] SD_4_CDn -> Not used
- * GPK0[3:6] SD_4_DATA[0:3](3)
- * GPK1[3:6] SD_4_DATA[4:7](4)
- */
-
- err0 = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
-
- /*
- * MMC device init
- * mmc0 : eMMC (8-bit buswidth)
- * mmc2 : SD card (4-bit buswidth)
- */
- if (err0)
- debug("SDMMC0 not configured\n");
- else
- err0 = s5p_mmc_init(0, 8);
-
- /* T-flash detect */
- s5p_gpio_cfg_pin(&gpio2->x3, 4, 0xf);
- s5p_gpio_set_pull(&gpio2->x3, 4, GPIO_PULL_UP);
-
- /*
- * Check the T-flash detect pin
- * GPX3[4] T-flash detect pin
- */
- if (!s5p_gpio_get_value(&gpio2->x3, 4)) {
- err2 = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);
- if (err2)
- debug("SDMMC2 not configured\n");
- else
- err2 = s5p_mmc_init(2, 4);
- }
-
- return err0 & err2;
-}
-
#ifdef CONFIG_USB_GADGET
static int s5pc210_phy_control(int on)
{
@@ -479,46 +369,7 @@ static int pmic_init_max77686(void)
*/
#ifdef CONFIG_LCD
-static struct mipi_dsim_config dsim_config = {
- .e_interface = DSIM_VIDEO,
- .e_virtual_ch = DSIM_VIRTUAL_CH_0,
- .e_pixel_format = DSIM_24BPP_888,
- .e_burst_mode = DSIM_BURST_SYNC_EVENT,
- .e_no_data_lane = DSIM_DATA_LANE_4,
- .e_byte_clk = DSIM_PLL_OUT_DIV8,
- .hfp = 1,
-
- .p = 3,
- .m = 120,
- .s = 1,
-
- /* D-PHY PLL stable time spec :min = 200usec ~ max 400usec */
- .pll_stable_time = 500,
-
- /* escape clk : 10MHz */
- .esc_clk = 20 * 1000000,
-
- /* stop state holding counter after bta change count 0 ~ 0xfff */
- .stop_holding_cnt = 0x7ff,
- /* bta timeout 0 ~ 0xff */
- .bta_timeout = 0xff,
- /* lp rx timeout 0 ~ 0xffff */
- .rx_timeout = 0xffff,
-};
-
-static struct exynos_platform_mipi_dsim dsim_platform_data = {
- .lcd_panel_info = NULL,
- .dsim_config = &dsim_config,
-};
-
-static struct mipi_dsim_lcd_device mipi_lcd_device = {
- .name = "s6e8ax0",
- .id = -1,
- .bus_id = 0,
- .platform_data = (void *)&dsim_platform_data,
-};
-
-static int mipi_power(void)
+int mipi_power(void)
{
struct pmic *p = pmic_get("MAX77686_PMIC");
@@ -556,77 +407,13 @@ void exynos_reset_lcd(void)
s5p_gpio_set_value(&gpio1->f2, 1, 1);
}
-vidinfo_t panel_info = {
- .vl_freq = 60,
- .vl_col = 720,
- .vl_row = 1280,
- .vl_width = 720,
- .vl_height = 1280,
- .vl_clkp = CONFIG_SYS_HIGH,
- .vl_hsp = CONFIG_SYS_LOW,
- .vl_vsp = CONFIG_SYS_LOW,
- .vl_dp = CONFIG_SYS_LOW,
- .vl_bpix = 4, /* Bits per pixel, 2^4 = 16 */
-
- /* s6e8ax0 Panel infomation */
- .vl_hspw = 5,
- .vl_hbpd = 10,
- .vl_hfpd = 10,
-
- .vl_vspw = 2,
- .vl_vbpd = 1,
- .vl_vfpd = 13,
- .vl_cmd_allow_len = 0xf,
- .mipi_enabled = 1,
-
- .dual_lcd_enabled = 0,
-
- .init_delay = 0,
- .power_on_delay = 25,
- .reset_delay = 0,
- .interface_mode = FIMD_RGB_INTERFACE,
-};
-
-void init_panel_info(vidinfo_t *vid)
+void exynos_lcd_misc_init(vidinfo_t *vid)
{
- vid->logo_on = 1;
- vid->resolution = HD_RESOLUTION;
- vid->rgb_mode = MODE_RGB_P;
-
- vid->power_on_delay = 30;
-
- mipi_lcd_device.reverse_panel = 1;
-
#ifdef CONFIG_TIZEN
get_tizen_logo_info(vid);
#endif
-
- strcpy(dsim_platform_data.lcd_panel_name, mipi_lcd_device.name);
- dsim_platform_data.mipi_power = mipi_power;
- dsim_platform_data.phy_enable = set_mipi_phy_ctrl;
- dsim_platform_data.lcd_panel_info = (void *)vid;
- exynos_mipi_dsi_register_lcd_device(&mipi_lcd_device);
-
+#ifdef CONFIG_S6E8AX0
s6e8ax0_init();
-
- exynos_set_dsim_platform_data(&dsim_platform_data);
-}
-#endif /* LCD */
-
-#ifdef CONFIG_MISC_INIT_R
-int misc_init_r(void)
-{
-#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- set_board_info();
-#endif
-#ifdef CONFIG_LCD_MENU
- keys_init();
- check_boot_mode();
#endif
-#ifdef CONFIG_CMD_BMP
- if (panel_info.logo_on)
- draw_logo();
-#endif
- return 0;
}
-#endif
+#endif /* LCD */
diff --git a/include/configs/trats2.h b/include/configs/trats2.h
index 6d389df..8194575 100644
--- a/include/configs/trats2.h
+++ b/include/configs/trats2.h
@@ -8,27 +8,17 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#ifndef __CONFIG_H
-#define __CONFIG_H
+#ifndef __CONFIG_TRATS2_H
+#define __CONFIG_TRATS2_H
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_SAMSUNG /* in a SAMSUNG core */
-#define CONFIG_S5P /* which is in a S5P Family */
-#define CONFIG_EXYNOS4 /* which is in a EXYNOS4XXX */
-#define CONFIG_TIZEN /* TIZEN lib */
+#include <configs/exynos4-dt.h>
-#include <asm/arch/cpu.h> /* get chip and board defs */
-
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_SYS_PROMPT "Trats2 # " /* Monitor Command Prompt */
-#define CONFIG_SKIP_LOWLEVEL_INIT
+#undef CONFIG_DEFAULT_DEVICE_TREE
+#define CONFIG_DEFAULT_DEVICE_TREE exynos4412-trats2
-#define CONFIG_SYS_CACHELINE_SIZE 32
+#define CONFIG_TIZEN /* TIZEN lib */
#define CONFIG_SYS_L2CACHE_OFF
#ifndef CONFIG_SYS_L2CACHE_OFF
@@ -36,121 +26,47 @@
#define CONFIG_SYS_PL310_BASE 0x10502000
#endif
-#define CONFIG_NR_DRAM_BANKS 4
-#define PHYS_SDRAM_1 0x40000000 /* LDDDR2 DMC 0 */
-#define PHYS_SDRAM_1_SIZE (256 << 20) /* 256 MB in CS 0 */
-#define PHYS_SDRAM_2 0x50000000 /* LPDDR2 DMC 1 */
-#define PHYS_SDRAM_2_SIZE (256 << 20) /* 256 MB in CS 0 */
-#define PHYS_SDRAM_3 0x60000000 /* LPDDR2 DMC 1 */
-#define PHYS_SDRAM_3_SIZE (256 << 20) /* 256 MB in CS 0 */
-#define PHYS_SDRAM_4 0x70000000 /* LPDDR2 DMC 1 */
-#define PHYS_SDRAM_4_SIZE (256 << 20) /* 256 MB in CS 0 */
-#define PHYS_SDRAM_END 0x80000000
-
-#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */
+/* TRATS2 has 4 banks of DRAM */
+#define CONFIG_NR_DRAM_BANKS 4
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
+#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
-#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
#define CONFIG_SYS_TEXT_BASE 0x78100000
-#define CONFIG_SYS_CLK_FREQ 24000000
-
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_REVISION_TAG
-
-/* MACH_TYPE_TRATS2 */
-#define MACH_TYPE_TRATS2 3765
-#define CONFIG_MACH_TYPE MACH_TYPE_TRATS2
-
-#define CONFIG_DISPLAY_CPUINFO
-
#include <linux/sizes.h>
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M))
/* select serial console configuration */
#define CONFIG_SERIAL2
+#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+/* Console configuration */
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_CMDLINE_EDITING
+#define CONFIG_BOOTARGS "Please use defined boot"
+#define CONFIG_BOOTCOMMAND "run mmcboot"
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
-#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
+ - GENERATED_GBL_DATA_SIZE)
-/* It should define before config_cmd_default.h */
-#define CONFIG_SYS_NO_FLASH
-
-/***********************************************************
- * Command definition
- ***********************************************************/
-#include <config_cmd_default.h>
-
-#undef CONFIG_CMD_ECHO
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_NAND
-#undef CONFIG_CMD_MISC
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_SOURCE
-#undef CONFIG_CMD_XIMG
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_DFU
-#define CONFIG_CMD_GPT
-#define CONFIG_CMD_PMIC
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
-#define CONFIG_CMD_FAT
-#define CONFIG_FAT_WRITE
-
-/* EXT4 */
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_EXT4_WRITE
-
-/* USB Composite download gadget - g_dnl */
-#define CONFIG_USBDOWNLOAD_GADGET
-#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
-#define DFU_DEFAULT_POLL_TIMEOUT 300
-#define CONFIG_DFU_FUNCTION
-#define CONFIG_DFU_MMC
-
-/* TIZEN THOR downloader support */
-#define CONFIG_CMD_THOR_DOWNLOAD
-#define CONFIG_THOR_FUNCTION
-
-/* USB Samsung's IDs */
-#define CONFIG_G_DNL_VENDOR_NUM 0x04E8
-#define CONFIG_G_DNL_PRODUCT_NUM 0x6601
-#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM
-#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D
-#define CONFIG_G_DNL_MANUFACTURER "Samsung"
-
-/* To use the TFTPBOOT over USB, Please enable the CONFIG_CMD_NET */
-#undef CONFIG_CMD_NET
-
-/* MMC */
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_S5P_SDHCI
-#define CONFIG_SDHCI
-#define CONFIG_MMC_SDMA
-#define CONFIG_MMC_DEFAULT_DEV 0
-
-/* PWM */
-#define CONFIG_PWM
-
-#define CONFIG_BOOTARGS "Please use defined boot"
-#define CONFIG_BOOTCOMMAND "run mmcboot"
-#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
+#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */
+
+#define CONFIG_SYS_MONITOR_BASE 0x00000000
+
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV
+#define CONFIG_ENV_SIZE 4096
+#define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_ENV_VARS_UBOOT_CONFIG
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
@@ -246,49 +162,11 @@
"setenv spl_addr_tmp;\0" \
"fdtaddr=40800000\0" \
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "Trats2 # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
-
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-/* memtest works on */
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000)
-
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
- - GENERATED_GBL_DATA_SIZE)
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
-
-#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV
-#define CONFIG_ENV_SIZE 4096
-#define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */
-#define CONFIG_EFI_PARTITION
-#define CONFIG_PARTITION_UUIDS
-
-#define CONFIG_BOARD_EARLY_INIT_F
-
/* I2C */
#include <asm/arch/gpio.h>
+#define CONFIG_CMD_I2C
+
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_S3C24X0
#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000
@@ -318,11 +196,6 @@ int get_soft_i2c_sda_pin(void);
#define CONFIG_POWER_MUIC_MAX77693
#define CONFIG_POWER_FG_MAX77693
#define CONFIG_POWER_BATTERY_TRATS2
-#define CONFIG_USB_GADGET
-#define CONFIG_USB_GADGET_S3C_UDC_OTG
-#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW 2
-#define CONFIG_USB_CABLE_CHECK
/* Common misc for Samsung */
#define CONFIG_MISC_COMMON
@@ -362,10 +235,7 @@ int get_soft_i2c_sda_pin(void);
#define CONFIG_VIDEO_BMP_GZIP
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
-#define CONFIG_CMD_USB_MASS_STORAGE
-#define CONFIG_USB_GADGET_MASS_STORAGE
-
-/* Pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT 1
+#define LCD_XRES 720
+#define LCD_YRES 1280
#endif /* __CONFIG_H */
--
1.8.3.2
More information about the U-Boot
mailing list