[U-Boot] [PATCH v2] powerpc/usb: Workaround for erratum-A006261

York Sun yorksun at freescale.com
Fri Mar 7 23:59:49 CET 2014


On 02/26/2014 12:59 AM, Suresh Gupta wrote:
> 	USB spec says that the minimum disconnect threshold should be
> 	over 525 mV. However, internal USB PHY threshold value is below
> 	this specified value. Due to this some devices disconnect at
> 	run-time. Hence, phy settings are tweaked to increased disconnect
> 	threshold to be above 525mV by using this workaround.
> 
> Signed-off-by: Suresh Gupta <suresh.gupta at freescale.com>
> ---
>  Changes for v2:
> 	- Incorporated missing SOC's affected by errata
> 


Applied to u-boot-mpc85xx/master. Thanks.

York



More information about the U-Boot mailing list