[U-Boot] [PATCH] drivers/spi/omap3: Bug fix of premature write transfer completion

[Vasili Galka]

The logic determining SPI "write" transfer completion was faulty. At
certain conditions (e.g. slow SPI clock freq) the transfers were
interrupted before completion. Both EOT and TXS flags of channel
status registeer shall be checked to ensure that all data was
transferred. Tested on AM3359 chip.

Signed-off-by: Vasili Galka <vasili at visionmap.com>
---
 drivers/spi/omap3_spi.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c
index a3ad056..651e46e 100644
--- a/drivers/spi/omap3_spi.c
+++ b/drivers/spi/omap3_spi.c
@@ -260,8 +260,9 @@ int omap3_spi_write(struct spi_slave *slave, unsigned int len, const void *txp,
 	}
 
 	/* wait to finish of transfer */
-	while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
-			 OMAP3_MCSPI_CHSTAT_EOT));
+	while ((readl(&ds->regs->channel[ds->slave.cs].chstat) &
+			 (OMAP3_MCSPI_CHSTAT_EOT | OMAP3_MCSPI_CHSTAT_TXS)) !=
+			 (OMAP3_MCSPI_CHSTAT_EOT | OMAP3_MCSPI_CHSTAT_TXS));
 
 	/* Disable the channel otherwise the next immediate RX will get affected */
 	omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS);
-- 
1.8.1.msysgit.1