[U-Boot] [PATCH][v2] powerpc/mpc8xxx: SECURE BOOT- Disable law 0 for non PBL platforms

[Aneesh Bansal]

ISBC creates a LAW 0 entry for non PBL platforms, which is not
disabled before transferring the control to uboot.
The LAW 0 entry has to be disabled.

Signed-off-by: Aneesh Bansal <aneesh.bansal at freescale.com>
---
 arch/powerpc/cpu/mpc8xxx/law.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

Changes from v1:
The LAW was being disabled in start.S in v1. As per discussion, it is 
moved out of start.S and done when U-boot initializes other LAW's.

diff --git a/arch/powerpc/cpu/mpc8xxx/law.c b/arch/powerpc/cpu/mpc8xxx/law.c
index a401083..55ee125 100644
--- a/arch/powerpc/cpu/mpc8xxx/law.c
+++ b/arch/powerpc/cpu/mpc8xxx/law.c
@@ -233,6 +233,16 @@ void init_laws(void)
 #error FSL_HW_NUM_LAWS can not be greater than 32 w/o code changes
 #endif
 
+#if defined(CONFIG_SECURE_BOOT) && defined(CONFIG_E500) && \
+						!defined(CONFIG_E500MC)
+	/* ISBC (Boot ROM) creates a LAW 0 entry for non PBL platforms,
+	 * which is not disabled before transferring the control to uboot.
+	 * Disable the LAW 0 entry here.
+	 */
+	disable_law(0);
+#endif
+
+
 	/*
 	 * Any LAWs that were set up before we booted assume they are meant to
 	 * be around and mark them used.
-- 
1.8.1.4