[U-Boot] [PATCH] Add support for offset of a filesystem within a block-device

[Tom Rini]

On Thu, Mar 06, 2014 at 02:30:35PM +0100, Hannes Petermaier wrote:

> For clear separation of user's (OS) filesystem to U-Boot and other's
> stuff it is now possible to give the filesystem a specific offset and a
> specific size.
> For full consistency OS storage driver also has to support this and
> has to use same offset and size.
> 
> Following new parameters has been added to the block_dev_desc_t
> structure:
> - lba_offset : offset in blocks from which fs is reading/writing
> - lba_fs     : size in blocks of fs
> 
> This two parameters are filled from the underlaying device-driver.
> As default they are initialized for giving whole size of block-device
> to the filesystem.
> 
> In case of mmc-driver a function for modifiying drive geometry is
> called 'board_mmc_geometry', this function is implemented as
> '__weak', so it can be replaced by a board-specific function, which
> can setup suitable offset and size for the filesystem.
> This function is responsible for giving reasonable values, e.g.
> lba_offset+lba_fs must not exceed available blocks of the device.
> 
> Only MMC Driver and FATFS are modified to support this.
> 
> Signed-off-by: Hannes Petermaier <oe5hpm at oevsv.at>

Sorry if I'm being dense here, but what is the usecase exactly?  When we
don't have a partition table of some sort?

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140312/118ac62f/attachment.pgp>