[U-Boot] [PATCH v6 2/2] Powerpc/QE: Add QE support for T1040
Zhao Qiang
B45475 at freescale.com
Fri Mar 14 03:00:04 CET 2014
The u-qe of T1040 has addresses different from qe,
modify those addresses value for both u-qe and qe.
Add function qe_board_setup to mux the bus to tdm or uart
according to hwconfig.
Signed-off-by: Zhao Qiang <B45475 at freescale.com>
---
Changes for v2:
- modify CONFIG_SYS_QE_FMAN_FW_ADDR to CONFIG_SYS_FMAN_FW_ADDR and CONFIG_SYS_QE_FW_ADDR
Changes for v3:
- use CONFIG_U_QE instead of CONFIG_PPC_T1040
Changes for v4:
- ifdef CONFIG_U_QE, include "../../../../drivers/qe/qe.h"
Changes for v5:
- no
Changes for v6:
- rebase
arch/powerpc/cpu/mpc85xx/cpu_init.c | 11 +++++++++++
arch/powerpc/cpu/mpc85xx/qe_io.c | 2 +-
arch/powerpc/cpu/mpc85xx/speed.c | 6 ++++++
arch/powerpc/cpu/mpc85xx/t1040_ids.c | 1 +
arch/powerpc/include/asm/config_mpc85xx.h | 3 +++
arch/powerpc/include/asm/fsl_liodn.h | 4 ++++
arch/powerpc/include/asm/immap_85xx.h | 5 ++++-
board/freescale/t1040qds/t1040qds.c | 31 +++++++++++++++++++++++++++++++
drivers/qe/qe.h | 2 ++
include/configs/T1040QDS.h | 3 +++
10 files changed, 66 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index e0fb3e5..ec17745 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -33,6 +33,9 @@
#endif
#include "../../../../drivers/block/fsl_sata.h"
+#ifdef CONFIG_U_QE
+#include "../../../../drivers/qe/qe.h"
+#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -85,6 +88,7 @@ void fsl_erratum_a006261_workaround(struct ccsr_usb_phy __iomem *usb_phy)
#ifdef CONFIG_QE
+#ifndef CONFIG_U_QE
extern qe_iop_conf_t qe_iop_conf_tab[];
extern void qe_config_iopin(u8 port, u8 pin, int dir,
int open_drain, int assign);
@@ -107,6 +111,7 @@ static void config_qe_ioports(void)
}
}
#endif
+#endif
#ifdef CONFIG_CPM2
void config_8560_ioports (volatile ccsr_cpm_t * cpm)
@@ -310,9 +315,11 @@ void cpu_init_f (void)
m8560_cpm_reset();
#endif
#ifdef CONFIG_QE
+#ifndef CONFIG_U_QE
/* Config QE ioports */
config_qe_ioports();
#endif
+#endif
#if defined(CONFIG_FSL_DMA)
dma_init();
#endif
@@ -798,7 +805,11 @@ int sata_initialize(void)
void cpu_secondary_init_r(void)
{
#ifdef CONFIG_QE
+#ifdef CONFIG_U_QE
+ uint qe_base = CONFIG_SYS_IMMR + 0x00140000; /* QE immr base */
+#else
uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */
+#endif
#ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND
int ret;
size_t fw_length = CONFIG_SYS_QE_FMAN_FW_LENGTH;
diff --git a/arch/powerpc/cpu/mpc85xx/qe_io.c b/arch/powerpc/cpu/mpc85xx/qe_io.c
index 76c60da..d2825ec 100644
--- a/arch/powerpc/cpu/mpc85xx/qe_io.c
+++ b/arch/powerpc/cpu/mpc85xx/qe_io.c
@@ -12,7 +12,7 @@
#include "asm/io.h"
#include "asm/immap_85xx.h"
-#if defined(CONFIG_QE)
+#if defined(CONFIG_QE) && !defined(CONFIG_U_QE)
#define NUM_OF_PINS 32
void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
{
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index adf09ef..25b967d 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -336,6 +336,12 @@ void get_sys_info(sys_info_t *sys_info)
#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+#ifdef CONFIG_QE
+#if defined(CONFIG_PPC_T1040)
+ sys_info->freq_qe = sys_info->freq_systembus / 2;
+#endif
+#endif
+
#else /* CONFIG_FSL_CORENET */
uint plat_ratio, e500_ratio, half_freq_systembus;
int i;
diff --git a/arch/powerpc/cpu/mpc85xx/t1040_ids.c b/arch/powerpc/cpu/mpc85xx/t1040_ids.c
index 68160a9..1034cd4 100644
--- a/arch/powerpc/cpu/mpc85xx/t1040_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/t1040_ids.c
@@ -46,6 +46,7 @@ struct liodn_id_table liodn_tbl[] = {
SET_DMA_LIODN(2, 227),
/* SET_NEXUS_LIODN(557), -- not yet implemented */
+ SET_QE_LIODN(559),
};
int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 9a20b97..943ca6f 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -734,6 +734,9 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_ERRATUM_A006261
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
+#define QE_MURAM_SIZE 0x6000UL
+#define MAX_QE_RISC 1
+#define QE_NUM_OF_SNUM 28
#elif defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081)
#define CONFIG_E6500
diff --git a/arch/powerpc/include/asm/fsl_liodn.h b/arch/powerpc/include/asm/fsl_liodn.h
index 44bc88d..f658bcb 100644
--- a/arch/powerpc/include/asm/fsl_liodn.h
+++ b/arch/powerpc/include/asm/fsl_liodn.h
@@ -99,6 +99,10 @@ extern void fdt_fixup_liodn(void *blob);
SET_GUTS_LIODN("fsl,esdhc", liodn, sdmmc##sdhcNum##liodnr,\
CONFIG_SYS_MPC85xx_ESDHC_OFFSET)
+#define SET_QE_LIODN(liodn) \
+ SET_GUTS_LIODN("fsl,qe", liodn, qeliodnr,\
+ CONFIG_SYS_MPC85xx_QE_OFFSET)
+
#define SET_QMAN_LIODN(liodn) \
SET_LIODN_ENTRY_1("fsl,qman", liodn, offsetof(ccsr_qman_t, liodnr) + \
CONFIG_SYS_FSL_QMAN_OFFSET, \
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 4b6f9d0..4bda0f1 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1889,7 +1889,9 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
u32 sata2liodnr; /* SATA 2 LIODN */
u32 sata3liodnr; /* SATA 3 LIODN */
u32 sata4liodnr; /* SATA 4 LIODN */
- u8 res22[32];
+ u8 res22[24];
+ u32 qeliodnr; /* QE LIODN */
+ u8 res_57c[4];
u32 dma1liodnr; /* DMA 1 LIODN */
u32 dma2liodnr; /* DMA 2 LIODN */
u32 dma3liodnr; /* DMA 3 LIODN */
@@ -2877,6 +2879,7 @@ struct ccsr_pman {
#define CONFIG_SYS_MPC85xx_LBC_OFFSET 0x124000
#define CONFIG_SYS_MPC85xx_IFC_OFFSET 0x124000
#define CONFIG_SYS_MPC85xx_GPIO_OFFSET 0x130000
+#define CONFIG_SYS_MPC85xx_QE_OFFSET 0x140000
#define CONFIG_SYS_FSL_CORENET_RMAN_OFFSET 0x1e0000
#if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && !defined(CONFIG_PPC_B4860)\
&& !defined(CONFIG_PPC_B4420)
diff --git a/board/freescale/t1040qds/t1040qds.c b/board/freescale/t1040qds/t1040qds.c
index 3dec447..a2a498a 100644
--- a/board/freescale/t1040qds/t1040qds.c
+++ b/board/freescale/t1040qds/t1040qds.c
@@ -18,6 +18,7 @@
#include <asm/fsl_portals.h>
#include <asm/fsl_liodn.h>
#include <fm_eth.h>
+#include <hwconfig.h>
#include "../common/qixis.h"
#include "t1040qds.h"
@@ -89,6 +90,32 @@ int select_i2c_ch_pca9547(u8 ch)
return 0;
}
+#ifdef CONFIG_T1040QDS
+static void qe_board_setup(void)
+{
+ u8 brdcfg15, brdcfg9;
+
+ if (hwconfig("qe") && hwconfig("tdm")) {
+ brdcfg15 = QIXIS_READ(brdcfg[15]);
+ /*
+ * TDMRiser uses QE-TDM
+ * Route QE_TDM signals to TDM Riser slot
+ */
+ QIXIS_WRITE(brdcfg[15], brdcfg15 | 7);
+ } else if (hwconfig("qe") && hwconfig("uart")) {
+ brdcfg15 = QIXIS_READ(brdcfg[15]);
+ brdcfg9 = QIXIS_READ(brdcfg[9]);
+ /*
+ * Route QE_TDM signals to UCC
+ * ProfiBus controlled by UCC3
+ */
+ brdcfg15 &= 0xfc;
+ QIXIS_WRITE(brdcfg[15], brdcfg15 | 2);
+ QIXIS_WRITE(brdcfg[9], brdcfg9 | 4);
+ }
+}
+#endif
+
int board_early_init_r(void)
{
#ifdef CONFIG_SYS_FLASH_BASE
@@ -196,6 +223,10 @@ int misc_init_r(void)
}
}
+#if defined(CONFIG_T1040QDS)
+ qe_board_setup();
+#endif
+
return 0;
}
diff --git a/drivers/qe/qe.h b/drivers/qe/qe.h
index c82ac7b..ebb7c5f 100644
--- a/drivers/qe/qe.h
+++ b/drivers/qe/qe.h
@@ -282,5 +282,7 @@ int qe_set_mii_clk_src(int ucc_num);
int qe_upload_firmware(const struct qe_firmware *firmware);
struct qe_firmware_info *qe_get_firmware_info(void);
void ft_qe_setup(void *blob);
+void qe_init(uint qe_base);
+void qe_reset(void);
#endif /* __QE_H__ */
diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index 84213b8..0340bb4 100644
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -595,6 +595,8 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_DPAA_FMAN
#define CONFIG_SYS_DPAA_PME
+#define CONFIG_QE
+#define CONFIG_U_QE
/* Default address of microcode for the Linux Fman driver */
#if defined(CONFIG_SPIFLASH)
/*
@@ -617,6 +619,7 @@ unsigned long get_board_ddr_clk(void);
#else
#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
+#define CONFIG_SYS_QE_FW_ADDR 0xEFF10000
#endif
#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
--
1.8.5
More information about the U-Boot
mailing list