[U-Boot] [PATCH v1 0/9] sunxi: initial upstreamining effort

[Albert ARIBAUD]

Hi Ian,

On Fri, 14 Mar 2014 10:33:32 +0000, Ian Campbell <ijc at hellion.org.uk>
wrote:

> Hi,
> 
> This is my first cut at an upstreamable series based upon the
> https://github.com/linux-sunxi/u-boot-sunxi.git#sunxi tree. The
> intention is to present a minimal starting point for upstreaming to
> which support for other processors, peripherals, boards etc can be
> added in the future. Therefore this has been stripped right back and
> currently supports only sun7i processors and the cubietruck
> board. Supported peripherals are UART, MMC and Ethernet.

I am not familiar with all of AllWinner's CPUs, so please forgive me if
I'm saying something stupid. Does sun7i support mean that A31 might be
supported as well? From what I understand, UART and Eth should be
somewhat common between A20 and A31, but MMC won't.

In any case, I am willing to try and add Mele A1000G U-Boot support
based on your series if that makes any sense. :)

Amicalement,
-- 
Albert.