[U-Boot] [PATCH 1/2] arm: mxs: Properly set GD pointer in SPL

[Marek Vasut]

Set the GD pointer in the SPL to a defined symbol so various
functions from U-Boot can be used without adverse side effects.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Stefano Babic <sbabic at denx.de>
---
 arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c
index 68c30af..87b63c1 100644
--- a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c
@@ -13,9 +13,13 @@
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/gpio.h>
+#include <linux/compiler.h>
 
 #include "mxs_init.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+gd_t gdata __section(".data");
+
 /*
  * This delay function is intended to be used only in early stage of boot, where
  * clock are not set up yet. The timer used here is reset on every boot and
@@ -109,6 +113,7 @@ void mxs_common_spl_init(const uint32_t arg, const uint32_t *resptr,
 	struct mxs_spl_data *data = (struct mxs_spl_data *)
 		((CONFIG_SYS_TEXT_BASE - sizeof(struct mxs_spl_data)) & ~0xf);
 	uint8_t bootmode = mxs_get_bootmode_index();
+	gd = &gdata;
 
 	mxs_iomux_setup_multiple_pads(iomux_setup, iomux_size);
 	mxs_power_init();
-- 
1.8.5.2