[U-Boot] [PATCH 4/6] move beagleboard over to use the generic distro configuation and environment
Dennis Gilmore
dennis at ausil.us
Thu Mar 20 23:12:59 CET 2014
port beagleboard to use the generic distro configuation.
remove duplicated config options, clean up the environment, include new
environment.
Signed-off-by: Dennis Gilmore <dennis at ausil.us>
---
include/configs/am335x_evm.h | 62 +++++++++------------------------------
include/configs/ti_armv7_common.h | 32 ++++++--------------
2 files changed, 23 insertions(+), 71 deletions(-)
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 11088b3..1dd4486 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -50,9 +50,9 @@
"nandrootfstype=ubifs rootwait=1\0" \
"nandboot=echo Booting from nand ...; " \
"run nandargs; " \
- "nand read ${fdtaddr} u-boot-spl-os; " \
- "nand read ${loadaddr} kernel; " \
- "bootz ${loadaddr} - ${fdtaddr}\0"
+ "nand read ${fdt_addr_r} u-boot-spl-os; " \
+ "nand read ${kernel_addr_r} kernel; " \
+ "bootz ${kernel_addr_r} - ${fdt_addr_r}\0"
#else
#define NANDARGS ""
#endif
@@ -100,60 +100,28 @@
"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
"ip=dhcp\0" \
"bootenv=uEnv.txt\0" \
- "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+ "loadbootenv=load mmc ${mmcdev} ${kernel_addr_r} ${bootenv}\0" \
"importbootenv=echo Importing environment from mmc ...; " \
- "env import -t $loadaddr $filesize\0" \
+ "env import -t $kernel_addr_r $filesize\0" \
"ramargs=setenv bootargs console=${console} " \
"${optargs} " \
"root=${ramroot} " \
"rootfstype=${ramrootfstype}\0" \
- "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
- "mmcloados=run mmcargs; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if run loadfdt; then " \
- "bootz ${loadaddr} - ${fdtaddr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootz; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootz; " \
- "fi;\0" \
- "mmcboot=mmc dev ${mmcdev}; " \
- "if mmc rescan; then " \
- "echo SD/MMC found on device ${mmcdev};" \
- "if run loadbootenv; then " \
- "echo Loaded environment from ${bootenv};" \
- "run importbootenv;" \
- "fi;" \
- "if test -n $uenvcmd; then " \
- "echo Running uenvcmd ...;" \
- "run uenvcmd;" \
- "fi;" \
- "if run loadimage; then " \
- "run mmcloados;" \
- "fi;" \
- "fi;\0" \
"spiboot=echo Booting from spi ...; " \
"run spiargs; " \
"sf probe ${spibusno}:0; " \
- "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
- "bootz ${loadaddr}\0" \
+ "sf read ${kernel_addr_r} ${spisrcaddr} ${spiimgsize}; " \
+ "bootz ${kernel_addr_r}\0" \
"netboot=echo Booting from network ...; " \
"setenv autoload no; " \
"dhcp; " \
- "tftp ${loadaddr} ${bootfile}; " \
- "tftp ${fdtaddr} ${fdtfile}; " \
+ "tftp ${kernel_addr_r} ${bootfile}; " \
+ "tftp ${fdt_addr_r} ${fdtfile}; " \
"run netargs; " \
- "bootz ${loadaddr} - ${fdtaddr}\0" \
+ "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
"ramboot=echo Booting from ramdisk ...; " \
"run ramargs; " \
- "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
+ "bootz ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0" \
"findfdt="\
"if test $board_name = A335BONE; then " \
"setenv fdtfile am335x-bone.dtb; fi; " \
@@ -166,15 +134,13 @@
"if test $fdtfile = undefined; then " \
"echo WARNING: Could not determine device tree to use; fi; \0" \
NANDARGS \
- DFUARGS
+ DFUARGS \
+ BOOTCMDS_COMMON
#endif
#define CONFIG_BOOTCOMMAND \
"run findfdt; " \
- "run mmcboot;" \
- "setenv mmcdev 1; " \
- "setenv bootpart 1:2; " \
- "run mmcboot;" \
+ "for target in ${boot_targets}; do run bootcmd_${target}; done " \
"run nandboot;"
/* NS16550 Configuration */
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index fda99fb..96c6bd0 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -28,7 +28,6 @@
#define CONFIG_SYS_NO_FLASH
/* Support both device trees and ATAGs. */
-#define CONFIG_OF_LIBFDT
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
@@ -53,6 +52,8 @@
#define DEFAULT_LINUX_BOOT_ENV \
"loadaddr=0x82000000\0" \
"kernel_addr_r=0x82000000\0" \
+ "pxe_addr_r=0x87F00000\0" \
+ "scriptaddr=0x87E00000\0" \
"fdtaddr=0x88000000\0" \
"fdt_addr_r=0x88000000\0" \
"rdaddr=0x88080000\0" \
@@ -60,11 +61,6 @@
"bootm_size=0x20000000\0"
/*
- * Default to a quick boot delay.
- */
-#define CONFIG_BOOTDELAY 1
-
-/*
* DDR information. If the CONFIG_NR_DRAM_BANKS is not defined,
* we say (for simplicity) that we have 1 bank, always, even when
* we have more. We always start at 0x80000000, and we place the
@@ -125,19 +121,12 @@
* console baudrate of 115200 and use the default baud rate table.
*/
#define CONFIG_SYS_MALLOC_LEN (1024 << 10)
-#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT "U-Boot# "
#define CONFIG_SYS_CONSOLE_INFO_QUIET
#define CONFIG_BAUDRATE 115200
#define CONFIG_ENV_VARS_UBOOT_CONFIG /* Strongly encouraged */
#define CONFIG_ENV_OVERWRITE /* Overwrite ethaddr / serial# */
-/* As stated above, the following choices are optional. */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_VERSION_VARIABLE
-
/* We set the max number of command args high to avoid HUSH bugs. */
#define CONFIG_SYS_MAXARGS 64
@@ -170,21 +159,18 @@
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_BOOTZ
/*
- * Common filesystems support. When we have removable storage we
- * enabled a number of useful commands and support.
+ * Include the generic config options and boot environment when not
+ * building our SPL
*/
-#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
-#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_FAT
-#define CONFIG_FAT_WRITE
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_FS_GENERIC
+#ifndef CONFIG_SPL_BUILD
+#include <config_distro_defaults.h>
+#include <config_distro_bootcmd.h>
#endif
+#define CONFIG_CMD_FAT
+
/*
* Our platforms make use of SPL to initalize the hardware (primarily
* memory) enough for full U-Boot to be loaded. We also support Falcon
--
1.9.0
More information about the U-Boot
mailing list