[U-Boot] [PATCH] ARM: mx6: Disable PCIe on SABRE Lite/Nitrogen6x

[Marek Vasut]

On Saturday, March 22, 2014 at 10:49:25 PM, Eric Nelson wrote:
> Hi Thierry,
> 
> On 03/22/2014 01:50 PM, Thierry Bultel wrote:
> > When I communicated about the bug I had,
> > and said that my temporary workaround was to disable the PCIe,
> > my intention was not to make the suppression become a standard,
> > and I believe it is a little bit frustrating for Marek.
> 
> I'm not sure I understand Marek's frustration. Marek's a capable
> guy, and certainly in a position to carry a 1-line patch around
> for his needs.

Uh, I'm not frustrated, where did that come from ? There's like gazilion of 
things which do frustrate me now (like I'm not in Germany now so I cannot eat a 
tasty Frankenschmaus or Bratwurst), but this ... nah.

> > The AMOS820, based on the sabrelite/nitrogen has a PCIe slot on the main
> > board, so there might be some interest of having the PCIe support
> > 
>  > enabled.
> 
> My first instinct is to say that if AMOS820 needs its' own
> setting, you can add a board for it and carry your own
> amos820.h.

Yes, make a new board support with all you need in there (new board dir, new 
board config etc).

[...]

Best regards,
Marek Vasut