[U-Boot] [PATCH v11 4/6] arm: faraday: add A369 evaluation board support
Kuo-Jung Su
dantesu at gmail.com
Wed Mar 26 07:03:17 CET 2014
From: Kuo-Jung Su <dantesu at faraday-tech.com>
The A369 is an ARM CPU-based SoC with rich SoC features and
convenient FPGA link for building fast system prototyping
and mass production.
More information about this hardware can be found at:
http://www.faraday-tech.com/html/Product/SoCPlatform/SoCreativeIII.htm
Signed-off-by: Kuo-Jung Su <dantesu at faraday-tech.com>
CC: Albert Aribaud <albert.u.boot at aribaud.net>
---
Changes for v11:
- Fix boards.cfg (due to commit 3fa67050)
- Rename <asm/sizes.h> to <linux/sizes.h> (due to commit 1ace4022)
- Directly specify the timer object in 'arch/arm/cpu/faraday/a369/Makefile'
instead of using CONFIG_FTPWMTMR010 in 'arch/arm/cpu/faraday/Makefile'
Changes for v10:
- Merge [arm: faraday: ftsmc020: add a fail-safe macro constant]
Changes for v9:
- Revise the commit message.
Changes for v8:
- Make A369 a standalong changeset.
Changes for v7:
- Update license to use SPDX identifiers.
Changes for v6:
- arch/arm/cpu/faraday/cpu.c:
struct ftwdt010_wdt __iomem *regs -> struct ftwdt010_wdt *regs
Changes for v5:
- Coding Style cleanup:
1. struct chip_regs __iomem *regs -> struct chip_regs *regs
2. Move Faraday specific APIs into asm/arch-faraday/*.h
- Fix Copyright notices (dates) throughout the patch
- Define Faraday machine type in board's config header file
- Add myself as the maintainer for Faraday A360/A369 in MAINTAINERS.
- Drop i2c:FTI2C010 & spi:FTSSP010_SPI support. The corresponding patch
would restart after this patch series have been accepted.
- Revise clock management system
Changes for v4:
- Coding Style cleanup.
- Break-down the interrupt, timers and common utilties.
Changes for v3:
- Coding Style cleanup.
- Drop macros for wirtel()/readl(), call them directly.
- Always insert a blank line between declarations and code.
- Add '__iomem' to all the declaration of HW register pointers.
- a36x_config: No more static global network configurations.
- a36x_config: Add a common file for the redundant configurations.
Changes for v2:
- Coding Style cleanup.
- Use readl(), writel(), clrsetbits_le32() to replace REG() macros.
- Use structure based hardware registers to replace the macro constants.
- Replace BIT() with BIT_MASK().
arch/arm/cpu/faraday/a369/Makefile | 8 ++
arch/arm/include/asm/arch-a369/hardware.h | 88 ++++++++++++
arch/arm/include/asm/arch-a369/sysc.h | 211 +++++++++++++++++++++++++++++
board/faraday/a369evb/Makefile | 9 ++
board/faraday/a369evb/board.c | 122 +++++++++++++++++
board/faraday/a369evb/clock.c | 68 ++++++++++
board/faraday/a369evb/lowlevel_init.S | 15 ++
boards.cfg | 1 +
include/configs/a369.h | 108 +++++++++++++++
include/faraday/ftsmc020.h | 1 +
10 files changed, 631 insertions(+)
create mode 100644 arch/arm/cpu/faraday/a369/Makefile
create mode 100644 arch/arm/include/asm/arch-a369/hardware.h
create mode 100644 arch/arm/include/asm/arch-a369/sysc.h
create mode 100644 board/faraday/a369evb/Makefile
create mode 100644 board/faraday/a369evb/board.c
create mode 100644 board/faraday/a369evb/clock.c
create mode 100644 board/faraday/a369evb/lowlevel_init.S
create mode 100644 include/configs/a369.h
diff --git a/arch/arm/cpu/faraday/a369/Makefile b/arch/arm/cpu/faraday/a369/Makefile
new file mode 100644
index 0000000..8a7c979
--- /dev/null
+++ b/arch/arm/cpu/faraday/a369/Makefile
@@ -0,0 +1,8 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := ../ftpwmtmr010.o
diff --git a/arch/arm/include/asm/arch-a369/hardware.h b/arch/arm/include/asm/arch-a369/hardware.h
new file mode 100644
index 0000000..9c824ad
--- /dev/null
+++ b/arch/arm/include/asm/arch-a369/hardware.h
@@ -0,0 +1,88 @@
+/*
+ * arch/arm/include/asm/arch-a369/hardware.h
+ *
+ * (C) Copyright 2013
+ * Faraday Technology Corporation. <http://www.faraday-tech.com/>
+ * Kuo-Jung Su <dantesu at gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <linux/sizes.h>
+
+#define CONFIG_DRAM_BASE 0x10000000
+
+#define CONFIG_SRAM_BASE 0xA0000000
+#define CONFIG_SRAM_SIZE 0x00008000
+
+#define CONFIG_SYSC_BASE 0x92000000
+#define CONFIG_DDRC_BASE 0x93100000
+#define CONFIG_AHBC_BASE 0x94000000
+#define CONFIG_SMC_BASE 0x94800000
+#define CONFIG_AHBC2_BASE 0x94200000
+
+/*
+ * Timer
+ */
+#define CONFIG_FTPWMTMR010_BASE 0x92300000
+#define CONFIG_FTPWMTMR010_IRQ 8
+
+/*
+ * UART
+ */
+#define CONFIG_FTUART010_BASE 0x92B00000
+
+/*
+ * Interrupt
+ */
+#define CONFIG_FTINTC020_BASE0 0x90100000
+#define CONFIG_FTINTC020_BASE1 0x96000000
+#define CONFIG_FTINTC020_BASE CONFIG_FTINTC020_BASE0
+
+/*
+ * I2C
+ */
+#define CONFIG_FTI2C010_BASE0 0x92900000
+#define CONFIG_FTI2C010_BASE1 0x92A00000
+#define CONFIG_FTI2C010_BASE CONFIG_FTI2C010_BASE0
+
+/*
+ * WatchDog
+ */
+#define CONFIG_FTWDT010_BASE 0x92200000
+
+/*
+ * NIC
+ */
+#define CONFIG_FTGMAC100_BASE 0x90C00000
+
+/*
+ * SPI
+ */
+#define CONFIG_FTSSP010_BASE 0x92700000
+
+/*
+ * NAND
+ */
+#define CONFIG_FTNANDC021_BASE 0x90200000
+
+/*
+ * LCD
+ */
+#define CONFIG_FTLCDC200_BASE 0x94A00000
+
+/*
+ * SD/MMC
+ */
+#define CONFIG_FTSDC010_BASE 0x90600000
+
+/*
+ * USB
+ */
+#define CONFIG_FUSBH200_BASE 0x90800000 /* FUSBH200 */
+#define CONFIG_FOTG210_BASE 0x90900000 /* FOTG210 */
+
+#endif
diff --git a/arch/arm/include/asm/arch-a369/sysc.h b/arch/arm/include/asm/arch-a369/sysc.h
new file mode 100644
index 0000000..ddf3e70
--- /dev/null
+++ b/arch/arm/include/asm/arch-a369/sysc.h
@@ -0,0 +1,211 @@
+/*
+ * (C) Copyright 2013
+ * Faraday Technology Corporation. <http://www.faraday-tech.com/tw/>
+ * Kuo-Jung Su <dantesu at gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ASM_ARCH_A369_SYSC_H
+#define _ASM_ARCH_A369_SYSC_H
+
+struct sysc_regs {
+ /* 0x000 ~ 0x0ff */
+ uint32_t idr; /* ID Register */
+ uint32_t revr; /* SCU revision id */
+ uint32_t hwcfg; /* HW configuration strap */
+ uint32_t cpumcfr; /* CPUM (master) freq. control */
+ uint32_t cr; /* SCU control register */
+ uint32_t sr; /* SCU status register */
+ uint32_t rsvd0[1];
+ uint32_t osccr; /* OSC control register */
+ uint32_t pllcr; /* PLL1 control register */
+ uint32_t dllcr; /* DLL control register */
+ uint32_t hclkgr; /* HCLK gating register */
+ uint32_t pclkgr; /* PCLK gating register */
+ uint32_t rsvd1[52];
+
+ /* 0x100 ~ 0x1ff */
+ uint32_t spr[16]; /* Scratchpad register */
+ uint32_t rsvd2[48];
+
+ /* 0x200 ~ 0x2ff */
+ uint32_t gpmux; /* General PINMUX */
+ uint32_t ehwcfg; /* Extended HW configuration strap */
+ uint32_t rsvd3[8];
+ uint32_t sccfg[2]; /* Special clock configuration */
+ uint32_t scer; /* Special clock enable register */
+ uint32_t rsvd;
+ uint32_t mfpmux[2];/* Multi-function pinmux */
+ uint32_t dcsrcr[2];/* Driving cap. & Slew rate control */
+ uint32_t rsvd4[3];
+ uint32_t dccr; /* Delay chain control register */
+ uint32_t pcr; /* Power control register */
+};
+
+/* HW configuration strap */
+#define HWCFG_PLL1NS(x) (((x) >> 5) & 0x3f)
+#define HWCFG_CPUM_MUL(x) ((((x) >> 3) & 3) > 2 ? 2 : (((x) >> 3) & 3))
+#define HWCFG_DLL_OFF (1 << 2)
+#define HWCFG_PLL_OFF (1 << 1)
+#define HWCFG_OSCHCNT_OFF (1 << 0)
+
+/* Extended HW configuration strap */
+#define EHWCFG_AST (1 << 15)
+#define EHWCFG_DBG (1 << 14)
+#define EHWCFG_DBGBYSW (1 << 13)
+#define EHWCFG_SATA_HOST (1 << 12)
+#define EHWCFG_PCIE_RC (1 << 11)
+#define EHWCFG_NAND_BK(x) (((x) >> 9) & 3)
+#define EHWCFG_NAND_BK16 (0 << 9) /* 16 page per block */
+#define EHWCFG_NAND_BK32 (1 << 9) /* 32 page per block */
+#define EHWCFG_NAND_BK64 (2 << 9) /* 64 page per block */
+#define EHWCFG_NAND_BK128 (3 << 9) /* 128 page per block */
+#define EHWCFG_NAND_PS(x) (((x) >> 7) & 3)
+#define EHWCFG_NAND_PS512 (0 << 7) /* 512 bytes per page */
+#define EHWCFG_NAND_PS2K (1 << 7) /* 2048 bytes per page */
+#define EHWCFG_NAND_PS4K (2 << 7) /* 4096 bytes per page */
+#define EHWCFG_NAND_AC(x) (((x) >> 5) & 3)
+#define EHWCFG_NAND_AC3 (0 << 5) /* addr cycle = 3 */
+#define EHWCFG_NAND_AC4 (1 << 5) /* addr cycle = 4 */
+#define EHWCFG_NAND_AC5 (2 << 5) /* addr cycle = 5 */
+#define EHWCFG_NAND_16X (1 << 4) /* NAND: 16bit mode */
+#define EHWCFG_EXTCPU (1 << 2) /* external cpu mode */
+#define EHWCFG_BOOT_NAND (0 << 0) /* boot from nand */
+#define EHWCFG_BOOT_SPI (1 << 0) /* boot from spi */
+#define EHWCFG_BOOT_NOR (2 << 0) /* boot from nor */
+
+/* General PINMUX */
+#define GPMUX_PLLGMAC (1 << 15) /* PLL = GMAC PLL(PLL2) */
+#define GPMUX_EXTIRQ (1 << 14) /* re-direct irq to external cpu */
+#define GPMUX_CS0REL (1 << 13) /* release CS0 memory space */
+#define GPMUX_IOEN (1 << 12) /* IO output enable */
+#define GPMUX_CPUS_START (1 << 11) /* start slave cpu (fa606te) */
+#define GPMUX_SATA_RESET (1 << 8)
+#define GPMUX_PDD (1 << 7) /* power-down detection enable */
+#define GPMUX_USBH_ALIVE (1 << 6)
+#define GPMUX_USBH_PHYOSC (1 << 5)
+#define GPMUX_OTG_ALIVE (1 << 4)
+#define GPMUX_OTG_PHYOSC (1 << 3)
+#define GPMUX_IRQMASK1 (1 << 2)
+#define GPMUX_IRQMASK0 (1 << 1)
+#define GPMUX_RESET (1 << 0)
+
+#define GPMUX_DEFAULT 0x1078 /* USB keep alive + IO output */
+
+/* HCLK gating register */
+#define HCLKGR_CPUM (1 << 31)
+#define HCLKGR_CPUS (1 << 30)
+#define HCLKGR_AHBTSIF (1 << 28)
+#define HCLKGR_AHBC3 (1 << 27)
+#define HCLKGR_AHBC2 (1 << 26)
+#define HCLKGR_AHBC1 (1 << 25)
+#define HCLKGR_APBBRG (1 << 24)
+#define HCLKGR_NANDC (1 << 23)
+#define HCLKGR_SMC (1 << 22)
+#define HCLKGR_DMAC1 (1 << 21)
+#define HCLKGR_DMAC0 (1 << 20)
+#define HCLKGR_H264 (1 << 19)
+#define HCLKGR_MPEG4 (1 << 18)
+#define HCLKGR_2DGRA (1 << 17)
+#define HCLKGR_LCD (1 << 16)
+#define HCLKGR_ISP (1 << 15)
+#define HCLKGR_AES (1 << 14)
+#define HCLKGR_GMAC (1 << 13)
+#define HCLKGR_SATAH (1 << 12)
+#define HCLKGR_SATAD (1 << 11)
+#define HCLKGR_PCIE (1 << 10)
+#define HCLKGR_USBH (1 << 9)
+#define HCLKGR_OTG (1 << 8)
+#define HCLKGR_SD1 (1 << 7)
+#define HCLKGR_SD0 (1 << 6)
+#define HCLKGR_IDE (1 << 5)
+#define HCLKGR_EM1 (1 << 4)
+#define HCLKGR_EM0 (1 << 3)
+#define HCLKGR_IRQ1 (1 << 2)
+#define HCLKGR_IRQ0 (1 << 1)
+#define HCLKGR_SCU (1 << 0)
+
+/* Special clock configuration */
+#define SCCFG0_SATA_25M (1 << 29)
+#define SCCFG0_SATA_OFF (1 << 28)
+#define SCCFG0_GMAC_CLK_IO (1 << 27)
+#define SCCFG0_GMAC_PLL_OFF (1 << 26)
+#define SCCFG0_GMAC_PLL_NS(x) (((x) & 0x3f) << 20)
+#define SCCFG0_ISP_BFREQ(x) (((x) & 0xf) << 16)
+#define SCCFG0_ISP_AFREQ(x) (((x) & 0xf) << 12)
+#define SCCFG0_IDE_FREQ(x) (((x) & 0xf) << 8)
+#define SCCFG0_EXTAHB_FREQ(x) (((x) & 0xf) << 4)
+#define SCCFG0_EXTAHB_MASK 0xf0
+#define SCCFG0_LCD_SCK_AHB (0 << 2) /* LCD scalar clock source */
+#define SCCFG0_LCD_SCK_APB (1 << 2)
+#define SCCFG0_LCD_SCK_EXT (2 << 2)
+#define SCCFG0_LCD_CK_AHB (0 << 0) /* LCD clock source */
+#define SCCFG0_LCD_CK_APB (1 << 0)
+#define SCCFG0_LCD_CK_EXT (2 << 0)
+
+#define SCCFG0_DEFAULT 0x26877330
+
+#define SCCFG1_SD1_CK_2AHB (0 << 18) /* SD1 clock source */
+#define SCCFG1_SD1_CK_3APB (1 << 18) /* SD1 clock source */
+#define SCCFG1_SD1_CK_AHB (2 << 18) /* SD1 clock source */
+#define SCCFG1_SD0_CK_2AHB (0 << 16) /* SD0 clock source */
+#define SCCFG1_SD0_CK_3APB (1 << 16) /* SD0 clock source */
+#define SCCFG1_SD0_CK_AHB (2 << 16) /* SD0 clock source */
+#define SCCFG1_SSP1_CK_EXT (1 << 12) /* SSP1 clock source */
+#define SCCFG1_SSP1_FREQ(x) (((x) & 0xf) << 8)
+#define SCCFG1_SSP0_CK_EXT (1 << 4) /* SSP0 clock source */
+#define SCCFG1_SSP0_FREQ(x) (((x) & 0xf) << 0)
+
+#define SCCFG1_DEFAULT \
+ (SCCFG1_SD1_CK_AHB | SCCFG1_SD0_CK_AHB \
+ | SCCFG1_SSP1_FREQ(0xA) | SCCFG1_SSP0_FREQ(0xA))
+
+/* Special clock enable register */
+#define SCER_GMAC125M (1 << 13)
+#define SCER_LCDSC (1 << 12) /* LCD scalar clock */
+#define SCER_LCD (1 << 11)
+#define SCER_ISPB (1 << 10)
+#define SCER_ISPA (1 << 9)
+#define SCER_IDE (1 << 8)
+#define SCER_EXTAHB (1 << 7)
+#define SCER_DDRD (1 << 6)
+#define SCER_DDRF (1 << 5)
+#define SCER_SD1 (1 << 4)
+#define SCER_SD0 (1 << 3)
+#define SCER_SSP1 (1 << 2)
+#define SCER_SSP0 (1 << 1)
+#define SCER_TSC (1 << 0)
+
+/* Multi-function pinmux register */
+#define MFPMUX0_EBI(x) (((x) & 0x3) << 10)
+#define MFPMUX0_LCD(x) (((x) & 0x3) << 8)
+#define MFPMUX0_TS(x) (((x) & 0x3) << 6)
+#define MFPMUX0_ISP(x) (((x) & 0x3) << 4)
+#define MFPMUX0_SATA(x) (((x) & 0x3) << 2)
+#define MFPMUX0_EXTAHB(x) (((x) & 0x3) << 0)
+
+#define MFPMUX0_DEFAULT 0x241 /* SD0 disabled, SD1 enabled */
+
+#define MFPMUX1_KBC(x) (((x) & 0x3) << 20)
+#define MFPMUX1_GPIO0(x) (((x) & 0x3) << 18)
+#define MFPMUX1_I2C1(x) (((x) & 0x3) << 16)
+#define MFPMUX1_PWM1(x) (((x) & 0x3) << 14)
+#define MFPMUX1_PWM0(x) (((x) & 0x3) << 12)
+#define MFPMUX1_GMAC(x) (((x) & 0x3) << 10)
+#define MFPMUX1_SSP1(x) (((x) & 0x3) << 8)
+#define MFPMUX1_SSP0(x) (((x) & 0x3) << 6)
+#define MFPMUX1_UART3(x) (((x) & 0x3) << 4)
+#define MFPMUX1_UART2(x) (((x) & 0x3) << 2)
+#define MFPMUX1_UART1(x) (((x) & 0x3) << 0)
+
+/* PLL1 control register */
+#define PLLCR_NS(x) (((x) >> 24) & 0x3f)
+#define PLLCR_STABLE (1 << 1)
+#define PLLCR_OFF (1 << 0)
+
+/* DLL control register */
+#define DLLCR_STABLE (1 << 1)
+#define DLLCR_ON (1 << 0)
+
+#endif /* EOF */
diff --git a/board/faraday/a369evb/Makefile b/board/faraday/a369evb/Makefile
new file mode 100644
index 0000000..42fef70
--- /dev/null
+++ b/board/faraday/a369evb/Makefile
@@ -0,0 +1,9 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := board.o clock.o
+obj-y += lowlevel_init.o
diff --git a/board/faraday/a369evb/board.c b/board/faraday/a369evb/board.c
new file mode 100644
index 0000000..cd206bb
--- /dev/null
+++ b/board/faraday/a369evb/board.c
@@ -0,0 +1,122 @@
+/*
+ * (C) Copyright 2013
+ * Faraday Technology Corporation. <http://www.faraday-tech.com/>
+ * Kuo-Jung Su <dantesu at gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/err.h>
+#include <asm/io.h>
+#include <spi.h>
+#include <nand.h>
+#include <netdev.h>
+#include <malloc.h>
+
+#include <asm/arch/sysc.h>
+#include <faraday/ftsmc020.h>
+#include <faraday/ftsdc010.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct ftsmc020 *smc = (void __iomem *)CONFIG_SMC_BASE;
+static struct sysc_regs *sysc = (void __iomem *)CONFIG_SYSC_BASE;
+
+static void pinmux_init(void)
+{
+ /* If it's an external CPU */
+ if (readl(&sysc->ehwcfg) & EHWCFG_EXTCPU) {
+ writel(HCLKGR_CPUM | HCLKGR_CPUS | HCLKGR_ISP,
+ &sysc->hclkgr);
+ setbits_le32(&sysc->gpmux, GPMUX_EXTIRQ);
+ } else {
+#ifdef CONFIG_A369_EXTAHB
+ /* Enable external AHB */
+ writel(HCLKGR_CPUS, &sysc->hclkgr);
+ writel(GPMUX_DEFAULT, &sysc->gpmux);
+ clrbits_le32(&sysc->sccfg[0], SCCFG0_EXTAHB_MASK);
+ setbits_le32(&sysc->sccfg[0], SCCFG0_EXTAHB_FREQ(8));
+#else
+ /* Enable SD1 */
+ writel(MFPMUX0_DEFAULT, &sysc->mfpmux[0]);
+#endif
+ }
+
+ /* Clock: SD = AHB, SSP = APB (SPI mode) */
+ writel(SCCFG1_DEFAULT, &sysc->sccfg[1]);
+}
+
+/*
+ * Static Memory Controller (NOR Flash)
+ */
+static void smc_init(void)
+{
+ uint32_t nor_base;
+
+ /* Bank 0: NOR flash */
+ if ((readl(&sysc->ehwcfg) & 3) != EHWCFG_BOOT_NOR)
+ nor_base = 0x20000000;
+ else
+ nor_base = 0;
+ writel(FTSMC020_BANK_ENABLE
+ | FTSMC020_BANK_BASE(nor_base) /* base address */
+ | FTSMC020_BANK_SIZE_64M /* window size */
+ | FTSMC020_BANK_MBW_16, /* data width */
+ &smc->bank[0].cr);
+ writel(FTSMC020_TPR_FAILSAFE, &smc->bank[0].tpr);
+
+ /* Bank 1 ~ 3: nothing attached */
+ writel(0, &smc->bank[1].cr);
+ writel(FTSMC020_TPR_FAILSAFE, &smc->bank[1].tpr);
+ writel(0, &smc->bank[2].cr);
+ writel(FTSMC020_TPR_FAILSAFE, &smc->bank[2].tpr);
+ writel(0, &smc->bank[3].cr);
+ writel(FTSMC020_TPR_FAILSAFE, &smc->bank[3].tpr);
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+int board_early_init_f(void)
+{
+ gd->arch.timer_rate_hz = clk_get_rate("APB");
+ pinmux_init();
+ smc_init();
+ return 0;
+}
+
+int board_init(void)
+{
+ gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+ gd->bd->bi_dram[0].size = CONFIG_SYS_SDRAM_SIZE;
+ gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+ return 0;
+}
+
+int board_eth_init(bd_t *bd)
+{
+#ifdef CONFIG_USB_ETHER
+ return usb_eth_initialize(bd);
+#elif defined(CONFIG_FTGMAC100)
+ return ftgmac100_initialize(bd);
+#else
+ return 0;
+#endif
+}
+
+int board_mmc_init(bd_t *bis)
+{
+#ifdef CONFIG_FTSDC010
+ return ftsdc010_mmc_init(0);
+#else
+ return 0;
+#endif
+}
diff --git a/board/faraday/a369evb/clock.c b/board/faraday/a369evb/clock.c
new file mode 100644
index 0000000..b713b89
--- /dev/null
+++ b/board/faraday/a369evb/clock.c
@@ -0,0 +1,68 @@
+/*
+ * (C) Copyright 2013
+ * Faraday Technology Corporation. <http://www.faraday-tech.com/>
+ * Kuo-Jung Su <dantesu at gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/sysc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct sysc_regs *sysc = (void __iomem *)CONFIG_SYSC_BASE;
+
+static inline ulong clk_get_rate_sys(void)
+{
+ return 33000000; /* 33 MHz */
+}
+
+static inline ulong clk_get_rate_ahb(void)
+{
+ return (clk_get_rate_sys() * PLLCR_NS(readl(&sysc->pllcr))) >> 3;
+}
+
+static inline ulong clk_get_rate_apb(void)
+{
+ return clk_get_rate_ahb() >> 1;
+}
+
+static inline ulong clk_get_rate_cpu(void)
+{
+ ulong clk = clk_get_rate_ahb();
+
+ /* If it's an internal CPU */
+ if (readl(&sysc->ehwcfg) & EHWCFG_EXTCPU)
+ return clk;
+ /*
+ * Since the master would stop immediately after kicking
+ * off slave cpu, so if GPMUX_CPUS_START is set,
+ * it must be a slave cpu.
+ */
+ if (!(readl(&sysc->gpmux) & GPMUX_CPUS_START))
+ clk = clk << HWCFG_CPUM_MUL(readl(&sysc->hwcfg));
+
+ return clk;
+}
+
+ulong clk_get_rate(const char *id)
+{
+ ulong ret = 0;
+
+ if (!strcmp(id, "AHB"))
+ ret = clk_get_rate_ahb();
+ else if (!strcmp(id, "APB"))
+ ret = clk_get_rate_apb();
+ else if (!strcmp(id, "CPU"))
+ ret = clk_get_rate_cpu();
+ else if (!strcmp(id, "I2C"))
+ ret = clk_get_rate_apb();
+ else if (!strcmp(id, "MMC") || !strcmp(id, "SDC"))
+ ret = clk_get_rate_ahb();
+ else if (!strcmp(id, "SPI") || !strcmp(id, "SSP"))
+ ret = clk_get_rate_apb();
+
+ return ret;
+}
diff --git a/board/faraday/a369evb/lowlevel_init.S b/board/faraday/a369evb/lowlevel_init.S
new file mode 100644
index 0000000..2085760
--- /dev/null
+++ b/board/faraday/a369evb/lowlevel_init.S
@@ -0,0 +1,15 @@
+/*
+ * (C) Copyright 2013
+ * Faraday Technology Corporation. <http://www.faraday-tech.com/>
+ * Kuo-Jung Su <dantesu at gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <version.h>
+
+/* Set up the platform, once the cpu has been initialized */
+.globl lowlevel_init
+lowlevel_init:
+ mov pc,lr
diff --git a/boards.cfg b/boards.cfg
index 69c8936..49c4f85 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -390,6 +390,7 @@ Active arm armv7:arm720t tegra20 toradex colibri_t20_iris
Active arm armv7:arm720t tegra30 avionic-design tec-ng tec-ng - Alban Bedel <alban.bedel at avionic-design.de>
Active arm armv7:arm720t tegra30 nvidia beaver beaver - Tom Warren <twarren at nvidia.com>:Stephen Warren <swarren at nvidia.com>
Active arm armv7:arm720t tegra30 nvidia cardhu cardhu - Tom Warren <twarren at nvidia.com>
+Active arm faraday a369 faraday a369evb a369evb a369 Kuo-Jung Su <dantesu at gmail.com>
Active arm pxa - - - balloon3 - Marek Vasut <marek.vasut at gmail.com>
Active arm pxa - - - h2200 - Lukasz Dalek <luk0104 at gmail.com>
Active arm pxa - - - palmld - Marek Vasut <marek.vasut at gmail.com>
diff --git a/include/configs/a369.h b/include/configs/a369.h
new file mode 100644
index 0000000..48c6bfa
--- /dev/null
+++ b/include/configs/a369.h
@@ -0,0 +1,108 @@
+/*
+ * (C) Copyright 2013
+ * Faraday Technology Corporation. <http://www.faraday-tech.com/>
+ * Kuo-Jung Su <dantesu at gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/hardware.h>
+
+/* Support NOR flash */
+/* #define CONFIG_A369_NOR_FLASH */
+
+/* Support USB RNDIS Ethernet */
+/* #define CONFIG_A369_USB_ETHER */
+
+/* Support USB DFU */
+#define CONFIG_A369_USB_DFU
+
+#if defined(CONFIG_A369_USB_ETHER) && defined(CONFIG_A369_USB_DFU)
+# error "USB-ETHER and USB-DFU can't be enabled at the same time."
+#endif
+
+/* Disable MMU/D-CACHE */
+#define CONFIG_SYS_DCACHE_OFF
+
+/* Memory Configuration */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE 0x10000000
+#define CONFIG_SYS_SDRAM_SIZE SZ_256M
+
+#define CONFIG_SYS_MALLOC_LEN SZ_2M
+#define CONFIG_SYS_TEXT_BASE 0x10800000
+
+/* Serial (UART) */
+#define CONFIG_FTUART010
+#define CONFIG_FTUART010_CLK 18432000
+#define CONFIG_BAUDRATE 38400
+
+/* NIC */
+#define CONFIG_FTGMAC100
+
+/* I2C */
+#define CONFIG_FTI2C010
+#define CONFIG_ENV_EEPROM_IS_ON_I2C
+
+/* MMC/SD */
+#define CONFIG_FTSDC010
+
+/* NOR flash */
+#ifdef CONFIG_A369_NOR_FLASH
+# define PHYS_FLASH_SIZE SZ_64M
+# define CONFIG_SYS_FLASH_BASE 0x20000000
+# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+# define CONFIG_SYS_MAX_FLASH_BANKS 1
+# define CONFIG_SYS_MAX_FLASH_SECT 1024
+#endif
+
+/* USB */
+#if defined(CONFIG_A369_USB_DFU) || defined(CONFIG_A369_USB_ETHER)
+# define CONFIG_USB_GADGET
+# define CONFIG_USB_GADGET_FOTG210
+# define CONFIG_USB_GADGET_DUALSPEED
+# define CONFIG_USB_GADGET_VBUS_DRAW 200
+# define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+# define CONFIG_USB_EHCI_BASE CONFIG_FUSBH200_BASE
+#else
+# define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+# define CONFIG_USB_EHCI_BASE_LIST \
+ { CONFIG_FUSBH200_BASE, CONFIG_FOTG210_BASE }
+#endif
+
+#ifdef CONFIG_A369_USB_DFU
+# define CONFIG_USBDOWNLOAD_GADGET
+# define CONFIG_DFU_FUNCTION
+# define CONFIG_DFU_RAM
+# define CONFIG_CMD_DFU
+#endif
+
+#ifdef CONFIG_A369_USB_ETHER
+# define CONFIG_USB_ETHER
+# define CONFIG_USB_ETH_RNDIS
+#endif
+
+/* Environment */
+#if defined(CONFIG_A369_NOR_FLASH)
+# define CONFIG_ENV_IS_IN_FLASH /* NOR flash */
+# define CONFIG_ENV_OFFSET 0x3f0000
+#else
+# define CONFIG_ENV_IS_NOWHERE
+#endif
+
+#define CONFIG_ENV_SIZE SZ_64K
+
+/* Faraday common configuration */
+#include "faraday-common.h"
+
+/* Platform specific environment variables */
+#ifdef CONFIG_A369_USB_DFU
+# define CONFIG_EXTRA_ENV_SETTINGS \
+ /* USB-DFU: [name] [interface] [start] [end] */ \
+ "dfu_alt_info=ram at 0x10800000 ram 0x10800000 0x11800000\0"
+#endif
+
+#endif /* EOF */
diff --git a/include/faraday/ftsmc020.h b/include/faraday/ftsmc020.h
index 54120ab..485d7c2 100644
--- a/include/faraday/ftsmc020.h
+++ b/include/faraday/ftsmc020.h
@@ -70,5 +70,6 @@ void ftsmc020_init(void);
#define FTSMC020_TPR_WTC(x) (((x) & 0x3) << 6)
#define FTSMC020_TPR_AHT(x) (((x) & 0x3) << 4)
#define FTSMC020_TPR_TRNA(x) (((x) & 0xf) << 0)
+#define FTSMC020_TPR_FAILSAFE 0x0f1ff3ff /* fail-safe timing */
#endif /* __FTSMC020_H */
--
1.7.9.5
More information about the U-Boot
mailing list