[U-Boot] [PATCH v3 2/2] MarSBoard: add new board
Eric Bénard
eric at eukrea.com
Thu Mar 27 18:10:50 CET 2014
this board is produced by Embest/Element 14 and is based on i.MX6 Dual
The following features are tested :
- UART2 (console)
- eMMC
- uSDCard
- Ethernet
- USB Host (through 2 ports hub)
- HDMI output
- I2C 1/2
- SPI NOR Flash
Boot on SPI NOR and through USB loader are tested.
For more informations on this board :
http://www.embest-tech.com/shop/star/marsboard.html
As this board shares a lot with RiOTboard, both boards are supported by
the same code base which is renamed embest/mx6boards.
Signed-off-by: Eric Bénard <eric at eukrea.com>
---
v3: switch to automatic board detection in c code to remove the #ifdef
#ifdef kept in the config file as one binary for both boards is not
possible actually since both boards use different RAM init.
board/embest/{riotboard => mx6boards}/Makefile | 2 +-
.../riotboard.c => mx6boards/mx6boards.c} | 83 ++++++++++++++++++++--
boards.cfg | 3 +-
include/configs/{riotboard.h => embestmx6boards.h} | 58 +++++++++++++++
4 files changed, 137 insertions(+), 9 deletions(-)
rename board/embest/{riotboard => mx6boards}/Makefile (87%)
rename board/embest/{riotboard/riotboard.c => mx6boards/mx6boards.c} (86%)
rename include/configs/{riotboard.h => embestmx6boards.h} (84%)
diff --git a/board/embest/riotboard/Makefile b/board/embest/mx6boards/Makefile
similarity index 87%
rename from board/embest/riotboard/Makefile
rename to board/embest/mx6boards/Makefile
index 5f978c0..467fb50 100644
--- a/board/embest/riotboard/Makefile
+++ b/board/embest/mx6boards/Makefile
@@ -6,4 +6,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y := riotboard.o
+obj-y := mx6boards.o
diff --git a/board/embest/riotboard/riotboard.c b/board/embest/mx6boards/mx6boards.c
similarity index 86%
rename from board/embest/riotboard/riotboard.c
rename to board/embest/mx6boards/mx6boards.c
index 15eaa1e..255771b 100644
--- a/board/embest/riotboard/riotboard.c
+++ b/board/embest/mx6boards/mx6boards.c
@@ -14,6 +14,7 @@
*/
#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux.h>
#include <asm/arch/mx6-pins.h>
@@ -60,6 +61,13 @@ DECLARE_GLOBAL_DATA_PTR;
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
+
+static int board_type = -1;
+#define BOARD_IS_MARSBOARD 0
+#define BOARD_IS_RIOTBOARD 1
+
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
@@ -153,6 +161,9 @@ iomux_v3_cfg_t const usdhc3_pads[] = {
MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
+iomux_v3_cfg_t const riotboard_usdhc3_pads[] = {
MX6_PAD_SD3_DAT4__GPIO7_IO01 | MUX_PAD_CTRL(NO_PAD_CTRL), /* WP */
MX6_PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
};
@@ -187,7 +198,10 @@ int board_mmc_getcd(struct mmc *mmc)
ret = !gpio_get_value(USDHC2_CD_GPIO);
break;
case USDHC3_BASE_ADDR:
- ret = !gpio_get_value(USDHC3_CD_GPIO);
+ if (board_type == BOARD_IS_RIOTBOARD)
+ ret = !gpio_get_value(USDHC3_CD_GPIO);
+ else if (board_type == BOARD_IS_MARSBOARD)
+ ret = 1; /* eMMC/uSDHC3 is always present */
break;
case USDHC4_BASE_ADDR:
ret = 1; /* eMMC/uSDHC4 is always present */
@@ -205,9 +219,13 @@ int board_mmc_init(bd_t *bis)
/*
* According to the board_mmc_init() the following map is done:
* (U-boot device node) (Physical Port)
+ * ** RiOTboard :
* mmc0 SDCard slot (bottom)
* mmc1 uSDCard slot (top)
* mmc2 eMMC
+ * ** MarSBoard :
+ * mmc0 uSDCard slot (bottom)
+ * mmc1 eMMC
*/
for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
switch (i) {
@@ -221,7 +239,15 @@ int board_mmc_init(bd_t *bis)
case 1:
imx_iomux_v3_setup_multiple_pads(
usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
- gpio_direction_input(USDHC3_CD_GPIO);
+ if (board_type == BOARD_IS_RIOTBOARD) {
+ imx_iomux_v3_setup_multiple_pads(
+ riotboard_usdhc3_pads,
+ ARRAY_SIZE(riotboard_usdhc3_pads));
+ gpio_direction_input(USDHC3_CD_GPIO);
+ gpio_direction_output(IMX_GPIO_NR(7, 8) , 0);
+ udelay(250);
+ gpio_set_value(IMX_GPIO_NR(7, 8), 1);
+ }
usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
usdhc_cfg[1].max_bus_width = 4;
break;
@@ -248,6 +274,20 @@ int board_mmc_init(bd_t *bis)
}
#endif
+#ifdef CONFIG_MXC_SPI
+iomux_v3_cfg_t const ecspi1_pads[] = {
+ MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_EIM_EB2__GPIO2_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+static void setup_spi(void)
+{
+ imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
+}
+#endif
+
struct i2c_pads_info i2c_pad_info1 = {
.scl = {
.i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | MUX_PAD_CTRL(I2C_PAD_CTRL),
@@ -446,6 +486,17 @@ int board_eth_init(bd_t *bis)
int board_early_init_f(void)
{
+ u32 cputype = cpu_type(get_cpu_rev());
+
+ switch (cputype) {
+ case MXC_CPU_MX6SOLO:
+ board_type = BOARD_IS_RIOTBOARD;
+ break;
+ case MXC_CPU_MX6D:
+ board_type = BOARD_IS_MARSBOARD;
+ break;
+ }
+
setup_iomux_uart();
#if defined(CONFIG_VIDEO_IPUV3)
setup_display();
@@ -458,29 +509,39 @@ int board_init(void)
{
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
- /* i2c1 : PMIC, Audio codec */
+ /* i2c1 : PMIC, Audio codec on RiOT, Expansion connector on MarS */
setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
/* i2c2 : HDMI EDID */
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
/* i2c3 : LVDS, Expansion connector */
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3);
-
+#ifdef CONFIG_MXC_SPI
+ setup_spi();
+#endif
return 0;
}
#ifdef CONFIG_CMD_BMODE
-static const struct boot_mode board_boot_modes[] = {
+static const struct boot_mode riotboard_boot_modes[] = {
{"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
{"sd3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
{"emmc", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
{NULL, 0},
};
+static const struct boot_mode marsboard_boot_modes[] = {
+ {"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
+ {"emmc", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
+ {NULL, 0},
+};
#endif
int board_late_init(void)
{
#ifdef CONFIG_CMD_BMODE
- add_board_boot_modes(board_boot_modes);
+ if (board_type == BOARD_IS_RIOTBOARD)
+ add_board_boot_modes(riotboard_boot_modes);
+ else if (board_type == BOARD_IS_RIOTBOARD)
+ add_board_boot_modes(marsboard_boot_modes);
#endif
return 0;
@@ -488,6 +549,14 @@ int board_late_init(void)
int checkboard(void)
{
- puts("Board: RIoTboard\n");
+
+ puts("Board: ");
+ if (board_type == BOARD_IS_MARSBOARD)
+ puts("MarSBoard\n");
+ else if (board_type == BOARD_IS_RIOTBOARD)
+ puts("RIoTboard\n");
+ else
+ printf("unknown - cputype : %02x\n", cpu_type(get_cpu_rev()));
+
return 0;
}
diff --git a/boards.cfg b/boards.cfg
index a29417c..d211cda 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -323,7 +323,8 @@ Active arm armv7 mx6 freescale mx6sabresd
Active arm armv7 mx6 freescale mx6sabresd mx6qsabresd mx6sabresd:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q Fabio Estevam <fabio.estevam at freescale.com>
Active arm armv7 mx6 freescale mx6slevk mx6slevk mx6slevk:IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL Fabio Estevam <fabio.estevam at freescale.com>
Active arm armv7 mx6 solidrun hummingboard hummingboard_solo hummingboard:IMX_CONFIG=board/solidrun/hummingboard/solo.cfg,MX6S,DDR_MB=512 Jon Nettleton <jon.nettleton at gmail.com>
-Active arm armv7 mx6 embest riotboard riotboard riotboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024 Eric Bénard <eric at eukrea.com>
+Active arm armv7 mx6 embest mx6boards riotboard embestmx6boards:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024,RIOTBOARD Eric Bénard <eric at eukrea.com>
+Active arm armv7 mx6 embest mx6boards marsboard embestmx6boards:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024,MARSBOARD Eric Bénard <eric at eukrea.com>
Active arm armv7 omap3 - overo omap3_overo - Steve Sakoman <sakoman at gmail.com>
Active arm armv7 omap3 - pandora omap3_pandora - Grazvydas Ignotas <notasas at gmail.com>
Active arm armv7 omap3 8dtech eco5pk eco5pk - Raphael Assenat <raph at 8d.com>
diff --git a/include/configs/riotboard.h b/include/configs/embestmx6boards.h
similarity index 84%
rename from include/configs/riotboard.h
rename to include/configs/embestmx6boards.h
index 747ec79..07ea2d2 100644
--- a/include/configs/riotboard.h
+++ b/include/configs/embestmx6boards.h
@@ -22,10 +22,19 @@
#define CONFIG_MXC_UART_BASE UART2_BASE
#define CONFIG_CONSOLE_DEV "ttymxc0"
#define CONFIG_MMCROOT "/dev/mmcblk1p2"
+#ifdef CONFIG_RIOTBOARD
#define CONFIG_DEFAULT_FDT_FILE "imx6s-riotboard.dtb"
+#elif defined CONFIG_MARSBOARD
+#define CONFIG_DEFAULT_FDT_FILE "imx6q-marsboard.dtb"
+#else
+#error Please define a board (RIOTBOARD or MARSBOARD)
+#endif
+
#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
+#ifdef CONFIG_RIOTBOARD
#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
+#endif
#define CONFIG_MX6
@@ -96,6 +105,19 @@
#define CONFIG_PHYLIB
#define CONFIG_PHY_ATHEROS
+#ifdef CONFIG_MARSBOARD
+#define CONFIG_CMD_SF
+#ifdef CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SST
+#define CONFIG_MXC_SPI
+#define CONFIG_SF_DEFAULT_BUS 0
+#define CONFIG_SF_DEFAULT_CS (0 | (IMX_GPIO_NR(2, 30) << 8))
+#define CONFIG_SF_DEFAULT_SPEED 20000000
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#endif
+#endif
+
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
@@ -134,6 +156,24 @@
#define EMMC_ENV ""
#endif
+#ifdef CONFIG_CMD_SF
+#define SF_ENV \
+ "update_spi_firmware=" \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "if ${get_cmd} ${update_spi_firmware_filename}; then " \
+ "if sf probe; then " \
+ "sf erase 0 0xc0000; " \
+ "sf write ${loadaddr} 0x400 ${filesize}; " \
+ "fi; " \
+ "fi\0"
+#else
+#define SF_ENV ""
+#endif
+
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
@@ -161,6 +201,7 @@
"fi; " \
"fi\0" \
EMMC_ENV \
+ SF_ENV \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
"root=${mmcroot}\0" \
"loadbootscript=" \
@@ -263,10 +304,22 @@
#define CONFIG_ENV_SIZE (8 * 1024)
+#ifdef CONFIG_RIOTBOARD
#define CONFIG_ENV_IS_IN_MMC
+#endif
+#ifdef CONFIG_MARSBOARD
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#endif
#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
+#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
+#define CONFIG_ENV_OFFSET (768 * 1024)
+#define CONFIG_ENV_SECT_SIZE (8 * 1024)
+#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
+#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
+#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
+#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
#endif
#define CONFIG_OF_LIBFDT
@@ -275,7 +328,12 @@
#define CONFIG_CMD_CACHE
#endif
+#ifdef CONFIG_RIOTBOARD
#define CONFIG_SYS_FSL_USDHC_NUM 3
+#elif defined(CONFIG_MARSBOARD)
+#define CONFIG_SYS_FSL_USDHC_NUM 2
+#endif
+
#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_SYS_MMC_ENV_DEV 2 /* SDHC4 */
#endif
--
1.8.5.3
More information about the U-Boot
mailing list