[U-Boot] [PATCH] board: hidden_dragon: remove an unused source file

[Masahiro Yamada]

Signed-off-by: Masahiro Yamada <yamada.m at jp.panasonic.com>
Cc: Yusdi Santoso <yusdi_santoso at adaptec.com>
---
 board/hidden_dragon/early_init.S | 137 ---------------------------------------
 1 file changed, 137 deletions(-)
 delete mode 100644 board/hidden_dragon/early_init.S

diff --git a/board/hidden_dragon/early_init.S b/board/hidden_dragon/early_init.S
deleted file mode 100644
index 5a9b924..0000000
--- a/board/hidden_dragon/early_init.S
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * (C) Copyright 2001
- * Thomas Koeller, tkoeller at gmx.net
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef	__ASSEMBLY__
-#define __ASSEMBLY__	1
-#endif
-
-#include <asm-offsets.h>
-#include <config.h>
-#include <asm/processor.h>
-#include <mpc824x.h>
-#include <ppc_asm.tmpl>
-
-#if defined(USE_DINK32)
-  /* We are running from RAM, so do not clear the MCCR1_MEMGO bit! */
-  #define MCCR1VAL ((CONFIG_SYS_ROMNAL << MCCR1_ROMNAL_SHIFT) | (CONFIG_SYS_ROMFAL << MCCR1_ROMFAL_SHIFT) | MCCR1_MEMGO)
-#else
-  #define MCCR1VAL (CONFIG_SYS_ROMNAL << MCCR1_ROMNAL_SHIFT) | (CONFIG_SYS_ROMFAL << MCCR1_ROMFAL_SHIFT)
-#endif
-
-	.text
-
-	/* Values to program into memory controller registers */
-tbl:	.long	MCCR1, MCCR1VAL
-	.long	MCCR2, CONFIG_SYS_REFINT << MCCR2_REFINT_SHIFT
-	.long	MCCR3
-	.long	(((CONFIG_SYS_BSTOPRE & 0x000000f0) >> 4) << MCCR3_BSTOPRE2TO5_SHIFT) | \
-		(CONFIG_SYS_REFREC << MCCR3_REFREC_SHIFT) | \
-		(CONFIG_SYS_RDLAT  << MCCR3_RDLAT_SHIFT)
-	.long	MCCR4
-	.long	(CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) | (CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) | \
-		(CONFIG_SYS_REGISTERD_TYPE_BUFFER << 20) | \
-		(((CONFIG_SYS_BSTOPRE & 0x00000300) >> 8) << MCCR4_BSTOPRE0TO1_SHIFT ) | \
-		((CONFIG_SYS_SDMODE_CAS_LAT << 4) | (CONFIG_SYS_SDMODE_WRAP << 3) | \
-		(CONFIG_SYS_SDMODE_BURSTLEN) << MCCR4_SDMODE_SHIFT) | \
-		(CONFIG_SYS_ACTTORW << MCCR4_ACTTORW_SHIFT) | \
-		((CONFIG_SYS_BSTOPRE & 0x0000000f) << MCCR4_BSTOPRE6TO9_SHIFT )
-	.long	MSAR1
-	.long	(((CONFIG_SYS_BANK0_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
-		(((CONFIG_SYS_BANK1_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
-		(((CONFIG_SYS_BANK2_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
-		(((CONFIG_SYS_BANK3_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
-	.long	EMSAR1
-	.long	(((CONFIG_SYS_BANK0_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
-		(((CONFIG_SYS_BANK1_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
-		(((CONFIG_SYS_BANK2_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
-		(((CONFIG_SYS_BANK3_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
-	.long	MSAR2
-	.long	(((CONFIG_SYS_BANK4_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
-		(((CONFIG_SYS_BANK5_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
-		(((CONFIG_SYS_BANK6_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
-		(((CONFIG_SYS_BANK7_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
-	.long	EMSAR2
-	.long	(((CONFIG_SYS_BANK4_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
-		(((CONFIG_SYS_BANK5_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
-		(((CONFIG_SYS_BANK6_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
-		(((CONFIG_SYS_BANK7_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
-	.long	MEAR1
-	.long	(((CONFIG_SYS_BANK0_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
-		(((CONFIG_SYS_BANK1_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
-		(((CONFIG_SYS_BANK2_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
-		(((CONFIG_SYS_BANK3_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
-	.long	EMEAR1
-	.long	(((CONFIG_SYS_BANK0_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
-		(((CONFIG_SYS_BANK1_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
-		(((CONFIG_SYS_BANK2_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
-		(((CONFIG_SYS_BANK3_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
-	.long	MEAR2
-	.long	(((CONFIG_SYS_BANK4_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  0) | \
-		(((CONFIG_SYS_BANK5_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) <<  8) | \
-		(((CONFIG_SYS_BANK6_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) | \
-		(((CONFIG_SYS_BANK7_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24)
-	.long	EMEAR2
-	.long	(((CONFIG_SYS_BANK4_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  0) | \
-		(((CONFIG_SYS_BANK5_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) <<  8) | \
-		(((CONFIG_SYS_BANK6_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) | \
-		(((CONFIG_SYS_BANK7_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24)
-	.long	0
-
-
-	/*
-	 * Early CPU initialization. Set up memory controller, so we can access any RAM at all. This
-	 * must be done in assembly, since we have no stack at this point.
-	 */
-	.global	early_init_f
-early_init_f:
-	mflr	r10
-
-	/* basic memory controller configuration */
-	lis	r3, CONFIG_ADDR_HIGH
-	lis	r4, CONFIG_DATA_HIGH
-	bl	lab
-lab:	mflr	r5
-	lwzu	r0, tbl - lab(r5)
-loop:	lwz	r1, 4(r5)
-	stwbrx	r0, 0, r3
-	eieio
-	stwbrx	r1, 0, r4
-	eieio
-	lwzu	r0, 8(r5)
-	cmpli	cr0, 0, r0, 0
-	bne	cr0, loop
-
-	/* set bank enable bits */
-	lis	r0, MBER at h
-	ori	r0, 0, MBER at l
-	li	r1, CONFIG_SYS_BANK_ENABLE
-	stwbrx	r0, 0, r3
-	eieio
-	stb	r1, 0(r4)
-	eieio
-
-	/* delay loop */
-	lis	r0, 0x0003
-	mtctr   r0
-delay:	bdnz	delay
-
-	/* enable memory controller */
-	lis	r0, MCCR1 at h
-	ori	r0, 0, MCCR1 at l
-	stwbrx	r0, 0, r3
-	eieio
-	lwbrx	r0, 0, r4
-	oris	r0, 0, MCCR1_MEMGO at h
-	stwbrx	r0, 0, r4
-	eieio
-
-	/* set up stack pointer */
-	lis	r1, CONFIG_SYS_INIT_SP_OFFSET at h
-	ori	r1, r1, CONFIG_SYS_INIT_SP_OFFSET at l
-
-	mtlr	r10
-	blr
-- 
1.8.3.2