[U-Boot] [PATCH v3 2/6] serial: add UniPhier serial driver
Masahiro Yamada
yamada.m at jp.panasonic.com
Tue Sep 2 13:28:33 CEST 2014
The driver for on-chip UART used on Panasonic UniPhier platform.
Signed-off-by: Masahiro Yamada <yamada.m at jp.panasonic.com>
---
Changes in v3: None
Changes in v2:
- Use "const unsigned int mode_x_div = 16"
instead of "#define MODE_X_DIV 16"
- Use DIV_ROUND_CLOSEST() macro to compute the divisor
drivers/serial/Makefile | 1 +
drivers/serial/serial.c | 2 +
drivers/serial/serial_uniphier.c | 204 +++++++++++++++++++++++++++++++++++++++
3 files changed, 207 insertions(+)
create mode 100644 drivers/serial/serial_uniphier.c
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 571c18f..385b2f9 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_BFIN_SERIAL) += serial_bfin.o
obj-$(CONFIG_FSL_LPUART) += serial_lpuart.o
obj-$(CONFIG_MXS_AUART) += mxs_auart.o
obj-$(CONFIG_ARC_SERIAL) += serial_arc.o
+obj-$(CONFIG_UNIPHIER_SERIAL) += serial_uniphier.o
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_USB_TTY) += usbtty.o
diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c
index d2eb752..d32673e 100644
--- a/drivers/serial/serial.c
+++ b/drivers/serial/serial.c
@@ -157,6 +157,7 @@ serial_initfunc(sh_serial_initialize);
serial_initfunc(arm_dcc_initialize);
serial_initfunc(mxs_auart_initialize);
serial_initfunc(arc_serial_initialize);
+serial_initfunc(uniphier_serial_initialize);
/**
* serial_register() - Register serial driver with serial driver core
@@ -250,6 +251,7 @@ void serial_initialize(void)
arm_dcc_initialize();
mxs_auart_initialize();
arc_serial_initialize();
+ uniphier_serial_initialize();
serial_assign(default_serial_console()->name);
}
diff --git a/drivers/serial/serial_uniphier.c b/drivers/serial/serial_uniphier.c
new file mode 100644
index 0000000..f8c9d92
--- /dev/null
+++ b/drivers/serial/serial_uniphier.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2012-2014 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m at jp.panasonic.com>
+ *
+ * Based on serial_ns16550.c
+ * (C) Copyright 2000
+ * Rob Taylor, Flying Pig Systems. robt at flyingpig.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <serial.h>
+
+#define UART_REG(x) \
+ u8 x; \
+ u8 postpad_##x[3];
+
+/*
+ * Note: Register map is slightly different from that of 16550.
+ */
+struct uniphier_serial {
+ UART_REG(rbr); /* 0x00 */
+ UART_REG(ier); /* 0x04 */
+ UART_REG(iir); /* 0x08 */
+ UART_REG(fcr); /* 0x0c */
+ u8 mcr; /* 0x10 */
+ u8 lcr;
+ u16 __postpad;
+ UART_REG(lsr); /* 0x14 */
+ UART_REG(msr); /* 0x18 */
+ u32 __none1;
+ u32 __none2;
+ u16 dlr;
+ u16 __postpad2;
+};
+
+#define thr rbr
+
+/*
+ * These are the definitions for the Line Control Register
+ */
+#define UART_LCR_WLS_8 0x03 /* 8 bit character length */
+
+/*
+ * These are the definitions for the Line Status Register
+ */
+#define UART_LSR_DR 0x01 /* Data ready */
+#define UART_LSR_THRE 0x20 /* Xmit holding register empty */
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void uniphier_serial_init(struct uniphier_serial *port)
+{
+ const unsigned int mode_x_div = 16;
+ unsigned int divisor;
+
+ writeb(UART_LCR_WLS_8, &port->lcr);
+
+ divisor = DIV_ROUND_CLOSEST(CONFIG_SYS_UNIPHIER_UART_CLK,
+ mode_x_div * gd->baudrate);
+
+ writew(divisor, &port->dlr);
+}
+
+static void uniphier_serial_setbrg(struct uniphier_serial *port)
+{
+ uniphier_serial_init(port);
+}
+
+static int uniphier_serial_tstc(struct uniphier_serial *port)
+{
+ return (readb(&port->lsr) & UART_LSR_DR) != 0;
+}
+
+static int uniphier_serial_getc(struct uniphier_serial *port)
+{
+ while (!uniphier_serial_tstc(port))
+ ;
+
+ return readb(&port->rbr);
+}
+
+static void uniphier_serial_putc(struct uniphier_serial *port, const char c)
+{
+ if (c == '\n')
+ uniphier_serial_putc(port, '\r');
+
+ while (!(readb(&port->lsr) & UART_LSR_THRE))
+ ;
+
+ writeb(c, &port->thr);
+}
+
+static struct uniphier_serial *serial_ports[4] = {
+#ifdef CONFIG_SYS_UNIPHIER_SERIAL_BASE0
+ (struct uniphier_serial *)CONFIG_SYS_UNIPHIER_SERIAL_BASE0,
+#else
+ NULL,
+#endif
+#ifdef CONFIG_SYS_UNIPHIER_SERIAL_BASE1
+ (struct uniphier_serial *)CONFIG_SYS_UNIPHIER_SERIAL_BASE1,
+#else
+ NULL,
+#endif
+#ifdef CONFIG_SYS_UNIPHIER_SERIAL_BASE2
+ (struct uniphier_serial *)CONFIG_SYS_UNIPHIER_SERIAL_BASE2,
+#else
+ NULL,
+#endif
+#ifdef CONFIG_SYS_UNIPHIER_SERIAL_BASE3
+ (struct uniphier_serial *)CONFIG_SYS_UNIPHIER_SERIAL_BASE3,
+#else
+ NULL,
+#endif
+};
+
+/* Multi serial device functions */
+#define DECLARE_ESERIAL_FUNCTIONS(port) \
+ static int eserial##port##_init(void) \
+ { \
+ uniphier_serial_init(serial_ports[port]); \
+ return 0 ; \
+ } \
+ static void eserial##port##_setbrg(void) \
+ { \
+ uniphier_serial_setbrg(serial_ports[port]); \
+ } \
+ static int eserial##port##_getc(void) \
+ { \
+ return uniphier_serial_getc(serial_ports[port]); \
+ } \
+ static int eserial##port##_tstc(void) \
+ { \
+ return uniphier_serial_tstc(serial_ports[port]); \
+ } \
+ static void eserial##port##_putc(const char c) \
+ { \
+ uniphier_serial_putc(serial_ports[port], c); \
+ }
+
+/* Serial device descriptor */
+#define INIT_ESERIAL_STRUCTURE(port, __name) { \
+ .name = __name, \
+ .start = eserial##port##_init, \
+ .stop = NULL, \
+ .setbrg = eserial##port##_setbrg, \
+ .getc = eserial##port##_getc, \
+ .tstc = eserial##port##_tstc, \
+ .putc = eserial##port##_putc, \
+ .puts = default_serial_puts, \
+}
+
+#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE0)
+DECLARE_ESERIAL_FUNCTIONS(0);
+struct serial_device uniphier_serial0_device =
+ INIT_ESERIAL_STRUCTURE(0, "ttyS0");
+#endif
+#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE1)
+DECLARE_ESERIAL_FUNCTIONS(1);
+struct serial_device uniphier_serial1_device =
+ INIT_ESERIAL_STRUCTURE(1, "ttyS1");
+#endif
+#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE2)
+DECLARE_ESERIAL_FUNCTIONS(2);
+struct serial_device uniphier_serial2_device =
+ INIT_ESERIAL_STRUCTURE(2, "ttyS2");
+#endif
+#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE3)
+DECLARE_ESERIAL_FUNCTIONS(3);
+struct serial_device uniphier_serial3_device =
+ INIT_ESERIAL_STRUCTURE(3, "ttyS3");
+#endif
+
+__weak struct serial_device *default_serial_console(void)
+{
+#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE0)
+ return &uniphier_serial0_device;
+#elif defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE1)
+ return &uniphier_serial1_device;
+#elif defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE2)
+ return &uniphier_serial2_device;
+#elif defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE3)
+ return &uniphier_serial3_device;
+#else
+#error "No uniphier serial ports configured."
+#endif
+}
+
+void uniphier_serial_initialize(void)
+{
+#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE0)
+ serial_register(&uniphier_serial0_device);
+#endif
+#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE1)
+ serial_register(&uniphier_serial1_device);
+#endif
+#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE2)
+ serial_register(&uniphier_serial2_device);
+#endif
+#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE3)
+ serial_register(&uniphier_serial3_device);
+#endif
+}
--
1.9.1
More information about the U-Boot
mailing list