[U-Boot] [PATCH v3 12/25] arm: marvell: Extract kirkwood gpio functions into new common file gpio.c
Stefan Roese
sr at denx.de
Tue Sep 2 14:03:00 CEST 2014
This makes is possible to use those gpio functions from other MVEBU SoC's as well.
Signed-off-by: Stefan Roese <sr at denx.de>
Acked-by: Prafulla Wadaskar <prafulla at marvell.com>
Tested-by: Luka Perkov <luka at openwrt.org>
---
Changes in v3:
- Added Acked-by from Prafulla to all Kirkwood patches
- Added Tested-by from Luka
Changes in v2: None
arch/arm/cpu/arm926ejs/kirkwood/cpu.c | 17 --------------
arch/arm/include/asm/arch-kirkwood/cpu.h | 2 +-
arch/arm/include/asm/arch-kirkwood/gpio.h | 16 ++++++-------
arch/arm/include/asm/arch-kirkwood/soc.h | 4 ++--
arch/arm/mvebu-common/Makefile | 1 +
arch/arm/mvebu-common/gpio.c | 30 +++++++++++++++++++++++++
board/LaCie/net2big_v2/net2big_v2.c | 4 ++--
board/LaCie/netspace_v2/netspace_v2.c | 4 ++--
board/LaCie/wireless_space/wireless_space.c | 4 ++--
board/Marvell/dreamplug/dreamplug.c | 6 ++---
board/Marvell/guruplug/guruplug.c | 6 ++---
board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 6 ++---
board/Marvell/openrd/openrd.c | 6 ++---
board/Marvell/rd6281a/rd6281a.c | 6 ++---
board/Marvell/sheevaplug/sheevaplug.c | 6 ++---
board/Seagate/dockstar/dockstar.c | 8 +++----
board/Seagate/goflexhome/goflexhome.c | 8 +++----
board/buffalo/lsxl/lsxl.c | 6 ++---
board/cloudengines/pogo_e02/pogo_e02.c | 6 ++---
board/d-link/dns325/dns325.c | 4 ++--
board/iomega/iconnect/iconnect.c | 6 ++---
board/karo/tk71/tk71.c | 6 ++---
board/keymile/km_arm/km_arm.c | 4 ++--
board/raidsonic/ib62x0/ib62x0.c | 6 ++---
24 files changed, 93 insertions(+), 79 deletions(-)
create mode 100644 arch/arm/mvebu-common/gpio.c
diff --git a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
index 75d3799..ea835fc 100644
--- a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
+++ b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
@@ -140,23 +140,6 @@ int kw_config_adr_windows(void)
}
/*
- * kw_config_gpio - GPIO configuration
- */
-void kw_config_gpio(u32 gpp0_oe_val, u32 gpp1_oe_val, u32 gpp0_oe, u32 gpp1_oe)
-{
- struct kwgpio_registers *gpio0reg =
- (struct kwgpio_registers *)KW_GPIO0_BASE;
- struct kwgpio_registers *gpio1reg =
- (struct kwgpio_registers *)KW_GPIO1_BASE;
-
- /* Init GPIOS to default values as per board requirement */
- writel(gpp0_oe_val, &gpio0reg->dout);
- writel(gpp1_oe_val, &gpio1reg->dout);
- writel(gpp0_oe, &gpio0reg->oe);
- writel(gpp1_oe, &gpio1reg->oe);
-}
-
-/*
* kw_config_mpp - Multi-Purpose Pins Functionality configuration
*
* Each MPP can be configured to different functionality through
diff --git a/arch/arm/include/asm/arch-kirkwood/cpu.h b/arch/arm/include/asm/arch-kirkwood/cpu.h
index 97daa40..5900a15 100644
--- a/arch/arm/include/asm/arch-kirkwood/cpu.h
+++ b/arch/arm/include/asm/arch-kirkwood/cpu.h
@@ -144,7 +144,7 @@ unsigned int kw_sdram_bar(enum memory_bank bank);
unsigned int kw_sdram_bs(enum memory_bank bank);
void kw_sdram_size_adjust(enum memory_bank bank);
int kw_config_adr_windows(void);
-void kw_config_gpio(unsigned int gpp0_oe_val, unsigned int gpp1_oe_val,
+void mvebu_config_gpio(unsigned int gpp0_oe_val, unsigned int gpp1_oe_val,
unsigned int gpp0_oe, unsigned int gpp1_oe);
int kw_config_mpp(unsigned int mpp0_7, unsigned int mpp8_15,
unsigned int mpp16_23, unsigned int mpp24_31,
diff --git a/arch/arm/include/asm/arch-kirkwood/gpio.h b/arch/arm/include/asm/arch-kirkwood/gpio.h
index 5f4d786..aa8c5da 100644
--- a/arch/arm/include/asm/arch-kirkwood/gpio.h
+++ b/arch/arm/include/asm/arch-kirkwood/gpio.h
@@ -21,14 +21,14 @@
#define GPIO_MAX 50
#define GPIO_OFF(pin) (((pin) >> 5) ? 0x0040 : 0x0000)
-#define GPIO_OUT(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x00)
-#define GPIO_IO_CONF(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x04)
-#define GPIO_BLINK_EN(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x08)
-#define GPIO_IN_POL(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x0c)
-#define GPIO_DATA_IN(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x10)
-#define GPIO_EDGE_CAUSE(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x14)
-#define GPIO_EDGE_MASK(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x18)
-#define GPIO_LEVEL_MASK(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x1c)
+#define GPIO_OUT(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x00)
+#define GPIO_IO_CONF(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x04)
+#define GPIO_BLINK_EN(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x08)
+#define GPIO_IN_POL(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x0c)
+#define GPIO_DATA_IN(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x10)
+#define GPIO_EDGE_CAUSE(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x14)
+#define GPIO_EDGE_MASK(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x18)
+#define GPIO_LEVEL_MASK(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x1c)
/*
* Kirkwood-specific GPIO API
diff --git a/arch/arm/include/asm/arch-kirkwood/soc.h b/arch/arm/include/asm/arch-kirkwood/soc.h
index 29fb2d9..332cc24 100644
--- a/arch/arm/include/asm/arch-kirkwood/soc.h
+++ b/arch/arm/include/asm/arch-kirkwood/soc.h
@@ -26,8 +26,8 @@
#define KW_UART0_BASE (KW_REGISTER(0x12000))
#define KW_UART1_BASE (KW_REGISTER(0x12100))
#define KW_MPP_BASE (KW_REGISTER(0x10000))
-#define KW_GPIO0_BASE (KW_REGISTER(0x10100))
-#define KW_GPIO1_BASE (KW_REGISTER(0x10140))
+#define MVEBU_GPIO0_BASE (KW_REGISTER(0x10100))
+#define MVEBU_GPIO1_BASE (KW_REGISTER(0x10140))
#define KW_RTC_BASE (KW_REGISTER(0x10300))
#define KW_NANDF_BASE (KW_REGISTER(0x10418))
#define KW_SPI_BASE (KW_REGISTER(0x10600))
diff --git a/arch/arm/mvebu-common/Makefile b/arch/arm/mvebu-common/Makefile
index 391a125..9dcab69 100644
--- a/arch/arm/mvebu-common/Makefile
+++ b/arch/arm/mvebu-common/Makefile
@@ -7,5 +7,6 @@
#
obj-y = dram.o
+obj-y += gpio.o
obj-$(CONFIG_ARMADA_XP) += mbus.o
obj-y += timer.o
diff --git a/arch/arm/mvebu-common/gpio.c b/arch/arm/mvebu-common/gpio.c
new file mode 100644
index 0000000..56e54e0
--- /dev/null
+++ b/arch/arm/mvebu-common/gpio.c
@@ -0,0 +1,30 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+
+/*
+ * mvebu_config_gpio - GPIO configuration
+ */
+void mvebu_config_gpio(u32 gpp0_oe_val, u32 gpp1_oe_val,
+ u32 gpp0_oe, u32 gpp1_oe)
+{
+ struct kwgpio_registers *gpio0reg =
+ (struct kwgpio_registers *)MVEBU_GPIO0_BASE;
+ struct kwgpio_registers *gpio1reg =
+ (struct kwgpio_registers *)MVEBU_GPIO1_BASE;
+
+ /* Init GPIOS to default values as per board requirement */
+ writel(gpp0_oe_val, &gpio0reg->dout);
+ writel(gpp1_oe_val, &gpio1reg->dout);
+ writel(gpp0_oe, &gpio0reg->oe);
+ writel(gpp1_oe, &gpio1reg->oe);
+}
diff --git a/board/LaCie/net2big_v2/net2big_v2.c b/board/LaCie/net2big_v2/net2big_v2.c
index 471db77..12a516e 100644
--- a/board/LaCie/net2big_v2/net2big_v2.c
+++ b/board/LaCie/net2big_v2/net2big_v2.c
@@ -26,8 +26,8 @@ DECLARE_GLOBAL_DATA_PTR;
int board_early_init_f(void)
{
/* GPIO configuration */
- kw_config_gpio(NET2BIG_V2_OE_VAL_LOW, NET2BIG_V2_OE_VAL_HIGH,
- NET2BIG_V2_OE_LOW, NET2BIG_V2_OE_HIGH);
+ mvebu_config_gpio(NET2BIG_V2_OE_VAL_LOW, NET2BIG_V2_OE_VAL_HIGH,
+ NET2BIG_V2_OE_LOW, NET2BIG_V2_OE_HIGH);
/* Multi-Purpose Pins Functionality configuration */
static const u32 kwmpp_config[] = {
diff --git a/board/LaCie/netspace_v2/netspace_v2.c b/board/LaCie/netspace_v2/netspace_v2.c
index 6a16e7b..323e34a 100644
--- a/board/LaCie/netspace_v2/netspace_v2.c
+++ b/board/LaCie/netspace_v2/netspace_v2.c
@@ -24,8 +24,8 @@ DECLARE_GLOBAL_DATA_PTR;
int board_early_init_f(void)
{
/* Gpio configuration */
- kw_config_gpio(NETSPACE_V2_OE_VAL_LOW, NETSPACE_V2_OE_VAL_HIGH,
- NETSPACE_V2_OE_LOW, NETSPACE_V2_OE_HIGH);
+ mvebu_config_gpio(NETSPACE_V2_OE_VAL_LOW, NETSPACE_V2_OE_VAL_HIGH,
+ NETSPACE_V2_OE_LOW, NETSPACE_V2_OE_HIGH);
/* Multi-Purpose Pins Functionality configuration */
static const u32 kwmpp_config[] = {
diff --git a/board/LaCie/wireless_space/wireless_space.c b/board/LaCie/wireless_space/wireless_space.c
index 53f5d2f..15b34a3 100644
--- a/board/LaCie/wireless_space/wireless_space.c
+++ b/board/LaCie/wireless_space/wireless_space.c
@@ -97,8 +97,8 @@ struct mv88e61xx_config swcfg = {
int board_early_init_f(void)
{
/* Gpio configuration */
- kw_config_gpio(WIRELESS_SPACE_OE_VAL_LOW, WIRELESS_SPACE_OE_VAL_HIGH,
- WIRELESS_SPACE_OE_LOW, WIRELESS_SPACE_OE_HIGH);
+ mvebu_config_gpio(WIRELESS_SPACE_OE_VAL_LOW, WIRELESS_SPACE_OE_VAL_HIGH,
+ WIRELESS_SPACE_OE_LOW, WIRELESS_SPACE_OE_HIGH);
/* Multi-Purpose Pins Functionality configuration */
kirkwood_mpp_conf(kwmpp_config, NULL);
diff --git a/board/Marvell/dreamplug/dreamplug.c b/board/Marvell/dreamplug/dreamplug.c
index 3c286be..07b7496 100644
--- a/board/Marvell/dreamplug/dreamplug.c
+++ b/board/Marvell/dreamplug/dreamplug.c
@@ -25,9 +25,9 @@ int board_early_init_f(void)
* There are maximum 64 gpios controlled through 2 sets of registers
* the below configuration configures mainly initial LED status
*/
- kw_config_gpio(DREAMPLUG_OE_VAL_LOW,
- DREAMPLUG_OE_VAL_HIGH,
- DREAMPLUG_OE_LOW, DREAMPLUG_OE_HIGH);
+ mvebu_config_gpio(DREAMPLUG_OE_VAL_LOW,
+ DREAMPLUG_OE_VAL_HIGH,
+ DREAMPLUG_OE_LOW, DREAMPLUG_OE_HIGH);
/* Multi-Purpose Pins Functionality configuration */
static const u32 kwmpp_config[] = {
diff --git a/board/Marvell/guruplug/guruplug.c b/board/Marvell/guruplug/guruplug.c
index a5b42b4..b18a306 100644
--- a/board/Marvell/guruplug/guruplug.c
+++ b/board/Marvell/guruplug/guruplug.c
@@ -22,9 +22,9 @@ int board_early_init_f(void)
* There are maximum 64 gpios controlled through 2 sets of registers
* the below configuration configures mainly initial LED status
*/
- kw_config_gpio(GURUPLUG_OE_VAL_LOW,
- GURUPLUG_OE_VAL_HIGH,
- GURUPLUG_OE_LOW, GURUPLUG_OE_HIGH);
+ mvebu_config_gpio(GURUPLUG_OE_VAL_LOW,
+ GURUPLUG_OE_VAL_HIGH,
+ GURUPLUG_OE_LOW, GURUPLUG_OE_HIGH);
/* Multi-Purpose Pins Functionality configuration */
static const u32 kwmpp_config[] = {
diff --git a/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c b/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c
index ee665c1..97fb61b 100644
--- a/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c
+++ b/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c
@@ -24,9 +24,9 @@ int board_early_init_f(void)
* There are maximum 64 gpios controlled through 2 sets of registers
* the below configuration configures mainly initial LED status
*/
- kw_config_gpio(MV88F6281GTW_GE_OE_VAL_LOW,
- MV88F6281GTW_GE_OE_VAL_HIGH,
- MV88F6281GTW_GE_OE_LOW, MV88F6281GTW_GE_OE_HIGH);
+ mvebu_config_gpio(MV88F6281GTW_GE_OE_VAL_LOW,
+ MV88F6281GTW_GE_OE_VAL_HIGH,
+ MV88F6281GTW_GE_OE_LOW, MV88F6281GTW_GE_OE_HIGH);
/* Multi-Purpose Pins Functionality configuration */
static const u32 kwmpp_config[] = {
diff --git a/board/Marvell/openrd/openrd.c b/board/Marvell/openrd/openrd.c
index 78ebb64..52dd083 100644
--- a/board/Marvell/openrd/openrd.c
+++ b/board/Marvell/openrd/openrd.c
@@ -27,9 +27,9 @@ int board_early_init_f(void)
* There are maximum 64 gpios controlled through 2 sets of registers
* the below configuration configures mainly initial LED status
*/
- kw_config_gpio(OPENRD_OE_VAL_LOW,
- OPENRD_OE_VAL_HIGH,
- OPENRD_OE_LOW, OPENRD_OE_HIGH);
+ mvebu_config_gpio(OPENRD_OE_VAL_LOW,
+ OPENRD_OE_VAL_HIGH,
+ OPENRD_OE_LOW, OPENRD_OE_HIGH);
/* Multi-Purpose Pins Functionality configuration */
static const u32 kwmpp_config[] = {
diff --git a/board/Marvell/rd6281a/rd6281a.c b/board/Marvell/rd6281a/rd6281a.c
index 8248274..df5fbea 100644
--- a/board/Marvell/rd6281a/rd6281a.c
+++ b/board/Marvell/rd6281a/rd6281a.c
@@ -23,9 +23,9 @@ int board_early_init_f(void)
* There are maximum 64 gpios controlled through 2 sets of registers
* the below configuration configures mainly initial LED status
*/
- kw_config_gpio(RD6281A_OE_VAL_LOW,
- RD6281A_OE_VAL_HIGH,
- RD6281A_OE_LOW, RD6281A_OE_HIGH);
+ mvebu_config_gpio(RD6281A_OE_VAL_LOW,
+ RD6281A_OE_VAL_HIGH,
+ RD6281A_OE_LOW, RD6281A_OE_HIGH);
/* Multi-Purpose Pins Functionality configuration */
static const u32 kwmpp_config[] = {
diff --git a/board/Marvell/sheevaplug/sheevaplug.c b/board/Marvell/sheevaplug/sheevaplug.c
index 4f17e09..18eeb4c 100644
--- a/board/Marvell/sheevaplug/sheevaplug.c
+++ b/board/Marvell/sheevaplug/sheevaplug.c
@@ -22,9 +22,9 @@ int board_early_init_f(void)
* There are maximum 64 gpios controlled through 2 sets of registers
* the below configuration configures mainly initial LED status
*/
- kw_config_gpio(SHEEVAPLUG_OE_VAL_LOW,
- SHEEVAPLUG_OE_VAL_HIGH,
- SHEEVAPLUG_OE_LOW, SHEEVAPLUG_OE_HIGH);
+ mvebu_config_gpio(SHEEVAPLUG_OE_VAL_LOW,
+ SHEEVAPLUG_OE_VAL_HIGH,
+ SHEEVAPLUG_OE_LOW, SHEEVAPLUG_OE_HIGH);
/* Multi-Purpose Pins Functionality configuration */
static const u32 kwmpp_config[] = {
diff --git a/board/Seagate/dockstar/dockstar.c b/board/Seagate/dockstar/dockstar.c
index dc73dfa..838f578 100644
--- a/board/Seagate/dockstar/dockstar.c
+++ b/board/Seagate/dockstar/dockstar.c
@@ -26,9 +26,9 @@ int board_early_init_f(void)
* There are maximum 64 gpios controlled through 2 sets of registers
* the below configuration configures mainly initial LED status
*/
- kw_config_gpio(DOCKSTAR_OE_VAL_LOW,
- DOCKSTAR_OE_VAL_HIGH,
- DOCKSTAR_OE_LOW, DOCKSTAR_OE_HIGH);
+ mvebu_config_gpio(DOCKSTAR_OE_VAL_LOW,
+ DOCKSTAR_OE_VAL_HIGH,
+ DOCKSTAR_OE_LOW, DOCKSTAR_OE_HIGH);
/* Multi-Purpose Pins Functionality configuration */
static const u32 kwmpp_config[] = {
@@ -143,7 +143,7 @@ void reset_phy(void)
static void set_leds(u32 leds, u32 blinking)
{
- struct kwgpio_registers *r = (struct kwgpio_registers *)KW_GPIO1_BASE;
+ struct kwgpio_registers *r = (struct kwgpio_registers *)MVEBU_GPIO1_BASE;
u32 oe = readl(&r->oe) | BOTH_LEDS;
writel(oe & ~leds, &r->oe); /* active low */
u32 bl = readl(&r->blink_en) & ~BOTH_LEDS;
diff --git a/board/Seagate/goflexhome/goflexhome.c b/board/Seagate/goflexhome/goflexhome.c
index 3e4ae89..c3f4cbf 100644
--- a/board/Seagate/goflexhome/goflexhome.c
+++ b/board/Seagate/goflexhome/goflexhome.c
@@ -83,9 +83,9 @@ int board_early_init_f(void)
* There are maximum 64 gpios controlled through 2 sets of registers
* the below configuration configures mainly initial LED status
*/
- kw_config_gpio(GOFLEXHOME_OE_VAL_LOW,
- GOFLEXHOME_OE_VAL_HIGH,
- GOFLEXHOME_OE_LOW, GOFLEXHOME_OE_HIGH);
+ mvebu_config_gpio(GOFLEXHOME_OE_VAL_LOW,
+ GOFLEXHOME_OE_VAL_HIGH,
+ GOFLEXHOME_OE_LOW, GOFLEXHOME_OE_HIGH);
kirkwood_mpp_conf(kwmpp_config, NULL);
return 0;
}
@@ -149,7 +149,7 @@ static void set_leds(u32 leds, u32 blinking)
u32 oe;
u32 bl;
- r = (struct kwgpio_registers *)KW_GPIO1_BASE;
+ r = (struct kwgpio_registers *)MVEBU_GPIO1_BASE;
oe = readl(&r->oe) | BOTH_LEDS;
writel(oe & ~leds, &r->oe); /* active low */
bl = readl(&r->blink_en) & ~BOTH_LEDS;
diff --git a/board/buffalo/lsxl/lsxl.c b/board/buffalo/lsxl/lsxl.c
index 26b8576..042132e 100644
--- a/board/buffalo/lsxl/lsxl.c
+++ b/board/buffalo/lsxl/lsxl.c
@@ -51,9 +51,9 @@ int board_early_init_f(void)
* There are maximum 64 gpios controlled through 2 sets of registers
* the below configuration configures mainly initial LED status
*/
- kw_config_gpio(LSXL_OE_VAL_LOW,
- LSXL_OE_VAL_HIGH,
- LSXL_OE_LOW, LSXL_OE_HIGH);
+ mvebu_config_gpio(LSXL_OE_VAL_LOW,
+ LSXL_OE_VAL_HIGH,
+ LSXL_OE_LOW, LSXL_OE_HIGH);
/*
* Multi-Purpose Pins Functionality configuration
diff --git a/board/cloudengines/pogo_e02/pogo_e02.c b/board/cloudengines/pogo_e02/pogo_e02.c
index ddc3fa6..314834f 100644
--- a/board/cloudengines/pogo_e02/pogo_e02.c
+++ b/board/cloudengines/pogo_e02/pogo_e02.c
@@ -26,9 +26,9 @@ int board_early_init_f(void)
* There are maximum 64 gpios controlled through 2 sets of registers
* the below configuration configures mainly initial LED status
*/
- kw_config_gpio(POGO_E02_OE_VAL_LOW,
- POGO_E02_OE_VAL_HIGH,
- POGO_E02_OE_LOW, POGO_E02_OE_HIGH);
+ mvebu_config_gpio(POGO_E02_OE_VAL_LOW,
+ POGO_E02_OE_VAL_HIGH,
+ POGO_E02_OE_LOW, POGO_E02_OE_HIGH);
/* Multi-Purpose Pins Functionality configuration */
static const u32 kwmpp_config[] = {
diff --git a/board/d-link/dns325/dns325.c b/board/d-link/dns325/dns325.c
index f2f43f5..fd23696 100644
--- a/board/d-link/dns325/dns325.c
+++ b/board/d-link/dns325/dns325.c
@@ -24,8 +24,8 @@ DECLARE_GLOBAL_DATA_PTR;
int board_early_init_f(void)
{
/* Gpio configuration */
- kw_config_gpio(DNS325_OE_VAL_LOW, DNS325_OE_VAL_HIGH,
- DNS325_OE_LOW, DNS325_OE_HIGH);
+ mvebu_config_gpio(DNS325_OE_VAL_LOW, DNS325_OE_VAL_HIGH,
+ DNS325_OE_LOW, DNS325_OE_HIGH);
/* Multi-Purpose Pins Functionality configuration */
static const u32 kwmpp_config[] = {
diff --git a/board/iomega/iconnect/iconnect.c b/board/iomega/iconnect/iconnect.c
index f376d3d..76c945a 100644
--- a/board/iomega/iconnect/iconnect.c
+++ b/board/iomega/iconnect/iconnect.c
@@ -22,9 +22,9 @@ int board_early_init_f(void)
* There are maximum 64 gpios controlled through 2 sets of registers
* the below configuration configures mainly initial LED status
*/
- kw_config_gpio(ICONNECT_OE_VAL_LOW,
- ICONNECT_OE_VAL_HIGH,
- ICONNECT_OE_LOW, ICONNECT_OE_HIGH);
+ mvebu_config_gpio(ICONNECT_OE_VAL_LOW,
+ ICONNECT_OE_VAL_HIGH,
+ ICONNECT_OE_LOW, ICONNECT_OE_HIGH);
/* Multi-Purpose Pins Functionality configuration */
static const u32 kwmpp_config[] = {
diff --git a/board/karo/tk71/tk71.c b/board/karo/tk71/tk71.c
index e877aa3..7aec5f9 100644
--- a/board/karo/tk71/tk71.c
+++ b/board/karo/tk71/tk71.c
@@ -26,9 +26,9 @@ int board_early_init_f(void)
* There are maximum 64 gpios controlled through 2 sets of registers
* the below configuration configures mainly initial LED status
*/
- kw_config_gpio(TK71_OE_VAL_LOW,
- TK71_OE_VAL_HIGH,
- TK71_OE_LOW, TK71_OE_HIGH);
+ mvebu_config_gpio(TK71_OE_VAL_LOW,
+ TK71_OE_VAL_HIGH,
+ TK71_OE_LOW, TK71_OE_HIGH);
/* Multi-Purpose Pins Functionality configuration */
static const u32 kwmpp_config[] = {
diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c
index cd508d2..6621464 100644
--- a/board/keymile/km_arm/km_arm.c
+++ b/board/keymile/km_arm/km_arm.c
@@ -222,8 +222,8 @@ int board_early_init_f(void)
u32 tmp;
/* set the 2 bitbang i2c pins as output gpios */
- tmp = readl(KW_GPIO0_BASE + 4);
- writel(tmp & (~KM_KIRKWOOD_SOFT_I2C_GPIOS) , KW_GPIO0_BASE + 4);
+ tmp = readl(MVEBU_GPIO0_BASE + 4);
+ writel(tmp & (~KM_KIRKWOOD_SOFT_I2C_GPIOS) , MVEBU_GPIO0_BASE + 4);
#endif
/* adjust SDRAM size for bank 0 */
kw_sdram_size_adjust(0);
diff --git a/board/raidsonic/ib62x0/ib62x0.c b/board/raidsonic/ib62x0/ib62x0.c
index 47956b2..dbcfb43 100644
--- a/board/raidsonic/ib62x0/ib62x0.c
+++ b/board/raidsonic/ib62x0/ib62x0.c
@@ -24,9 +24,9 @@ int board_early_init_f(void)
* There are maximum 64 gpios controlled through 2 sets of registers
* the below configuration configures mainly initial LED status
*/
- kw_config_gpio(IB62x0_OE_VAL_LOW,
- IB62x0_OE_VAL_HIGH,
- IB62x0_OE_LOW, IB62x0_OE_HIGH);
+ mvebu_config_gpio(IB62x0_OE_VAL_LOW,
+ IB62x0_OE_VAL_HIGH,
+ IB62x0_OE_LOW, IB62x0_OE_HIGH);
/* Set SATA activity LEDs to default off */
writel(MVSATAHC_LED_POLARITY_CTRL, MVSATAHC_LED_CONF_REG);
--
2.1.0
More information about the U-Boot
mailing list