[U-Boot] [U-boot] [Patch 5/6] keystone2: enable OSR clock domain for K2L SoC
Ivan Khoronzhuk
ivan.khoronzhuk at ti.com
Wed Sep 3 19:35:23 CEST 2014
From: Hao Zhang <hzhang at ti.com>
This patches enables the On-chip Shared Ram clock domain for K2L SoC.
Signed-off-by: Hao Zhang <hzhang at ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk at ti.com>
---
arch/arm/cpu/armv7/keystone/init.c | 49 +++++++++++++++++++++++
arch/arm/include/asm/arch-keystone/hardware-k2l.h | 25 ++++++++++++
arch/arm/include/asm/arch-keystone/hardware.h | 1 +
3 files changed, 75 insertions(+)
diff --git a/arch/arm/cpu/armv7/keystone/init.c b/arch/arm/cpu/armv7/keystone/init.c
index a0ecfa2..2228132 100644
--- a/arch/arm/cpu/armv7/keystone/init.c
+++ b/arch/arm/cpu/armv7/keystone/init.c
@@ -13,6 +13,7 @@
#include <asm/arch/msmc.h>
#include <asm/arch/clock.h>
#include <asm/arch/hardware.h>
+#include <asm/arch/psc_defs.h>
void chip_configuration_unlock(void)
{
@@ -20,6 +21,53 @@ void chip_configuration_unlock(void)
__raw_writel(KS2_KICK1_MAGIC, KS2_KICK1);
}
+#ifdef CONFIG_SOC_K2L
+void osr_init(void)
+{
+ u32 i;
+ u32 j;
+ u32 val;
+ u32 base = KS2_OSR_CFG_BASE;
+ u32 ecc_ctrl[KS2_OSR_NUM_RAM_BANKS];
+
+ /* Enable the OSR clock domain */
+ psc_enable_module(KS2_LPSC_OSR);
+
+ /* Disable OSR ECC check for all the ram banks */
+ for (i = 0; i < KS2_OSR_NUM_RAM_BANKS; i++) {
+ val = i | KS2_OSR_ECC_VEC_TRIG_RD |
+ (KS2_OSR_ECC_CTRL << KS2_OSR_ECC_VEC_RD_ADDR_SH);
+
+ writel(val , base + KS2_OSR_ECC_VEC);
+
+ /**
+ * wait till read is done.
+ * Print should be added after earlyprintk support is added.
+ */
+ for (j = 0; j < 10000; j++) {
+ val = readl(base + KS2_OSR_ECC_VEC);
+ if (val & KS2_OSR_ECC_VEC_RD_DONE)
+ break;
+ }
+
+ ecc_ctrl[i] = readl(base + KS2_OSR_ECC_CTRL) ^
+ KS2_OSR_ECC_CTRL_CHK;
+
+ writel(ecc_ctrl[i], KS2_MSMC_DATA_BASE + i * 4);
+ writel(ecc_ctrl[i], base + KS2_OSR_ECC_CTRL);
+ }
+
+ /* Reset OSR memory to all zeros */
+ for (i = 0; i < KS2_OSR_SIZE; i += 4)
+ writel(0, KS2_OSR_DATA_BASE + i);
+
+ /* Enable OSR ECC check for all the ram banks */
+ for (i = 0; i < KS2_OSR_NUM_RAM_BANKS; i++)
+ writel(ecc_ctrl[i] |
+ KS2_OSR_ECC_CTRL_CHK, base + KS2_OSR_ECC_CTRL);
+}
+#endif
+
int arch_cpu_init(void)
{
chip_configuration_unlock();
@@ -34,6 +82,7 @@ int arch_cpu_init(void)
#endif
#ifdef CONFIG_SOC_K2L
msmc_share_all_segments(14); /* PCIE 1 */
+ osr_init();
#endif
/*
diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2l.h b/arch/arm/include/asm/arch-keystone/hardware-k2l.h
index 3402d0c..dfde040 100644
--- a/arch/arm/include/asm/arch-keystone/hardware-k2l.h
+++ b/arch/arm/include/asm/arch-keystone/hardware-k2l.h
@@ -57,6 +57,31 @@
#define KS2_CIC2_DDR3_ECC_IRQ_NUM 0x0D3
#define KS2_CIC2_DDR3_ECC_CHAN_NUM 0x01D
+/* OSR */
+#define KS2_OSR_DATA_BASE 0x70000000 /* OSR data base */
+#define KS2_OSR_CFG_BASE 0x02348c00 /* OSR config base */
+#define KS2_OSR_ECC_VEC 0x08 /* ECC Vector reg */
+#define KS2_OSR_ECC_CTRL 0x14 /* ECC control reg */
+
+/* OSR ECC Vector register */
+#define KS2_OSR_ECC_VEC_TRIG_RD BIT(15) /* trigger a read op */
+#define KS2_OSR_ECC_VEC_RD_DONE BIT(24) /* read complete */
+
+#define KS2_OSR_ECC_VEC_RAM_ID_SH 0 /* RAM ID shift */
+#define KS2_OSR_ECC_VEC_RD_ADDR_SH 16 /* read address shift */
+
+/* OSR ECC control register */
+#define KS2_OSR_ECC_CTRL_EN BIT(0) /* ECC enable bit */
+#define KS2_OSR_ECC_CTRL_CHK BIT(1) /* ECC check bit */
+#define KS2_OSR_ECC_CTRL_RMW BIT(2) /* ECC check bit */
+
+/* Number of OSR RAM banks */
+#define KS2_OSR_NUM_RAM_BANKS 4
+
+/* OSR memory size */
+#define KS2_OSR_SIZE 0x100000
+
+
/* Number of DSP cores */
#define KS2_NUM_DSPS 4
diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h
index 89dce96..2eec4e7 100644
--- a/arch/arm/include/asm/arch-keystone/hardware.h
+++ b/arch/arm/include/asm/arch-keystone/hardware.h
@@ -161,6 +161,7 @@ typedef volatile unsigned int *dv_reg_p;
/* MSMC control */
#define KS2_MSMC_CTRL_BASE 0x0bc00000
+#define KS2_MSMC_DATA_BASE 0x0c000000
/* USB */
#define KS2_USB_SS_BASE 0x02680000
--
1.8.3.2
More information about the U-Boot
mailing list