[U-Boot] [PATCH] powerpc/t104xrdb: Set DDR ODT to 75ohm

[Priyanka Jain]

DDR-ODT require cfg_dram_type switch set properly as per DDR type.
T1040RDB, T1042RDB boards have DDR3L type DDR, so cfg_dram_type
should be set to OFF for DDR3L
Update t104xrdb/README for switch setting

Signed-off-by: Priyanka Jain <Priyanka.Jain at freescale.com>
---
 board/freescale/t104xrdb/README |    6 +++---
 board/freescale/t104xrdb/ddr.c  |    4 ++--
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/board/freescale/t104xrdb/README b/board/freescale/t104xrdb/README
index cdbe1fa..fe1621c 100644
--- a/board/freescale/t104xrdb/README
+++ b/board/freescale/t104xrdb/README
@@ -259,15 +259,15 @@ Switch Settings: (ON is 0, OFF is 1)
 ===============
 NAND boot SW setting:
 SW1: 10001000
-SW2: 00111001
+SW2: 00111011
 SW3: 11110001
 
 SPI boot SW setting:
 SW1: 00100010
-SW2: 10111001
+SW2: 10111011
 SW3: 11100001
 
 SD boot SW setting:
 SW1: 00100000
-SW2: 00111001
+SW2: 00111011
 SW3: 11100001
diff --git a/board/freescale/t104xrdb/ddr.c b/board/freescale/t104xrdb/ddr.c
index 34c9224..2c331ee 100644
--- a/board/freescale/t104xrdb/ddr.c
+++ b/board/freescale/t104xrdb/ddr.c
@@ -105,8 +105,8 @@ found:
 	popts->zq_en = 1;
 
 	/* DHC_EN =1, ODT = 75 Ohm */
-	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_OFF);
-	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_OFF);
+	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
+	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
 }
 
 phys_size_t initdram(int board_type)
-- 
1.7.4.1