[U-Boot] [PATCH v2 3/5] iMX6DL:arm2: Add support for i.MX6DL arm2 DDR3 board

[Li Ye-B37916]

On 9/5/2014 2:43 AM, Otavio Salvador wrote:
> Hello Ye,
>
> On Thu, Sep 4, 2014 at 11:17 AM, Ye.Li <B37916 at freescale.com> wrote:
>> This patch adds the i.MX6DL arm2 board support. The i.MX6DL ARM2
>> shared the same board with i.MX6Q ARM2 board since the i.MX6DL is
>> pin-pin compatible with i.MX6Q.
>>
>> The patch also support the DDR 32-BIT mode option. Please define
>> CONFIG_DDR_32BIT in the board configure file to enable DDR 32-BIT
>> mode.But due to the board design, it's 64bit DDR buswidth physically,
>> so, if you CONFIG_DDR_32BIT, the DDR memory size will be half of it.
>>
>> Signed-off-by: Ye.Li <B37916 at freescale.com>
> Your patch short log could be improved for:
>
> imx: mx6dlarm2: Add support for i.MX6DL arm2 DDR3 board
>
> This could be reworked on the other patches as well.
>
> My 2c.
>
Thanks for your comments. I will rework the short logs in v3.

Best regards,
Ye Li