[U-Boot] VxWorks Booting using U-boot as Bootloader

[Ashish Khetan]

Hi Hannes
Thanks for your reply.  I am using VxWorks 6.7 and the image is not
stripped.  The loadaddress is also same within kernel configuration. I am
using bootvx command to boot VxWorks.  Do I need to update boot parameters?
On Sep 8, 2014 4:11 PM, "Hannes Petermaier" <
Hannes.Petermaier at br-automation.com> wrote:

> Hi Ashish,
>
> i had a problem booting vxworks in the past around interrupt vectors.
> Which version of vxworks you are using ? do you use a stripped image ?
> is the loadaddress the same within kernel configuration ?
>
> best regards,
> hannes
>
> > From: Ashish Khetan <curieux.khetan at gmail.com>
> > To: u-boot at lists.denx.de
> > Date: 04.09.2014 14:13
> > Subject: [U-Boot] VxWorks Booting using U-boot as Bootloader
> > Sent by: u-boot-bounces at lists.denx.de
> >
> > Hi,
> > I was trying to boot vxworks using u-boot bootloader for learning
> purpose
> > on MPC8640DHPCN board. Previously I successfully ported QNX os along
> with
> > linux on same board using u-boot. while booting using bootvx command its
> > not booting and stucking after showing the following message:
> >
> > tftp 01000000 vxWorks
> > Speed: 1000, full duplex
> > Using eTSEC1 device
> > TFTP from server 192.168.10.2; our IP address is 192.168.10.4
> > Filename 'vxWorks'.
> > Load address: 0x1000000
> > Loading:
> * #################################################################
> >      #################################################################
> >      #################################
> >      12.3 MiB/s
> > done
> > Bytes transferred = 2392432 (248170 hex)
> > BOSSv2.0=> bootvx 0010         1000000
> > ## Ethernet MAC address not copied to NV RAM
> > ## Using bootline (@ 0x4200): root=/dev/nfs rw
> > nfsroot=192.168.10.2:/opt/eldk-5.3/powerpc/rootfs-basic
> > ip=192.168.10.4:192.168.10.2:192.168.10.1:255.255.255.0:Boss:eth0:off
> > panic=1 console=ttyS0,115200
> > ## Starting vxWorks at 0x00100000 ...
> >
> >
> > please somebody provide me some link or any pointer to help me get more
> > understanding about booting multiple os using uboot.
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de
> > http://lists.denx.de/mailman/listinfo/u-boot
>
>
>